
The Mutt E-Mail Client

Michael Elkins

   <me@cs.hmc.edu>

   version 1.5.13 (2006-08-11)

   Abstract

   ``All mail clients suck. This one just sucks less.'' -me, circa 1995
     _________________________________________________________________

   Table of Contents

   1. Introduction

        1. Mutt Home Page
        2. Mailing Lists
        3. Software Distribution Sites
        4. IRC
        5. USENET
        6. Copyright

   2. Getting Started

        1. Moving Around in Menus
        2. Editing Input Fields

              2.1. Introduction
              2.2. History

        3. Reading Mail - The Index and Pager

              3.1. The Message Index
              3.2. The Pager
              3.3. Threaded Mode
              3.4. Miscellaneous Functions

        4. Sending Mail

              4.1. Editing the message header
              4.2. Using Mutt with PGP
              4.3. Sending anonymous messages via mixmaster.

        5. Forwarding and Bouncing Mail
        6. Postponing Mail

   3. Configuration

        1. Syntax of Initialization Files
        2. Defining/Using aliases
        3. Changing the default key bindings
        4. Defining aliases for character sets 
        5. Setting variables based upon mailbox
        6. Keyboard macros
        7. Using color and mono video attributes
        8. Ignoring (weeding) unwanted message headers
        9. Alternative addresses
        10. Mailing lists
        11. Using Multiple spool mailboxes
        12. Defining mailboxes which receive mail
        13. User defined headers
        14. Defining the order of headers when viewing messages
        15. Specify default save filename
        16. Specify default Fcc: mailbox when composing
        17. Specify default save filename and default Fcc: mailbox at once
        18. Change settings based upon message recipients
        19. Change settings before formatting a message
        20. Choosing the cryptographic key of the recipient
        21. Adding key sequences to the keyboard buffer
        22. Executing functions
        23. Message Scoring
        24. Spam detection
        25. Setting and Querying Variables

              25.1. Commands
              25.2. User-defined variables

        26. Reading initialization commands from another file
        27. Removing hooks

   4. Advanced Usage

        1. Regular Expressions
        2. Patterns

              2.1. Pattern Modifier
              2.2. Complex Patterns
              2.3. Searching by Date

        3. Using Tags
        4. Using Hooks

              4.1. Message Matching in Hooks

        5. External Address Queries
        6. Mailbox Formats
        7. Mailbox Shortcuts
        8. Handling Mailing Lists
        9. Editing threads

              9.1. Linking threads
              9.2. Breaking threads

        10. Delivery Status Notification (DSN) Support
        11. POP3 Support (OPTIONAL)
        12. IMAP Support (OPTIONAL)

              12.1. The Folder Browser
              12.2. Authentication

        13. Managing multiple IMAP/POP accounts (OPTIONAL)
        14. Start a WWW Browser on URLs (EXTERNAL)
        15. Local caching (OPTIONAL)

              15.1. Header caching
              15.2. Body caching

   5. Mutt's MIME Support

        1. Using MIME in Mutt

              1.1. Viewing MIME messages in the pager
              1.2. The Attachment Menu
              1.3. The Compose Menu

        2. MIME Type configuration with mime.types
        3. MIME Viewer configuration with mailcap

              3.1. The Basics of the mailcap file
              3.2. Secure use of mailcap
              3.3. Advanced mailcap Usage
              3.4. Example mailcap files

        4. MIME Autoview
        5. MIME Multipart/Alternative
        6. Attachment Searching and Counting
        7. MIME Lookup

   6. Reference

        1. Command line options
        2. Configuration Commands
        3. Configuration variables

              3.1. abort_nosubject
              3.2. abort_unmodified
              3.3. alias_file
              3.4. alias_format
              3.5. allow_8bit
              3.6. allow_ansi
              3.7. arrow_cursor
              3.8. ascii_chars
              3.9. askbcc
              3.10. askcc
              3.11. attach_format
              3.12. attach_sep
              3.13. attach_split
              3.14. attribution
              3.15. autoedit
              3.16. auto_tag
              3.17. beep
              3.18. beep_new
              3.19. bounce
              3.20. bounce_delivered
              3.21. braille_friendly
              3.22. charset
              3.23. check_new
              3.24. collapse_unread
              3.25. uncollapse_jump
              3.26. compose_format
              3.27. config_charset
              3.28. confirmappend
              3.29. confirmcreate
              3.30. connect_timeout
              3.31. content_type
              3.32. copy
              3.33. crypt_use_gpgme
              3.34. crypt_autopgp
              3.35. crypt_autosmime
              3.36. date_format
              3.37. default_hook
              3.38. delete
              3.39. delete_untag
              3.40. digest_collapse
              3.41. display_filter
              3.42. dotlock_program
              3.43. dsn_notify
              3.44. dsn_return
              3.45. duplicate_threads
              3.46. edit_headers
              3.47. editor
              3.48. encode_from
              3.49. envelope_from_address
              3.50. escape
              3.51. fast_reply
              3.52. fcc_attach
              3.53. fcc_clear
              3.54. folder
              3.55. folder_format
              3.56. followup_to
              3.57. force_name
              3.58. forward_decode
              3.59. forward_edit
              3.60. forward_format
              3.61. forward_quote
              3.62. from
              3.63. gecos_mask
              3.64. hdrs
              3.65. header
              3.66. help
              3.67. hidden_host
              3.68. hide_limited
              3.69. hide_missing
              3.70. hide_thread_subject
              3.71. hide_top_limited
              3.72. hide_top_missing
              3.73. history
              3.74. honor_followup_to
              3.75. hostname
              3.76. ignore_list_reply_to
              3.77. imap_authenticators
              3.78. imap_check_subscribed
              3.79. imap_delim_chars
              3.80. imap_headers
              3.81. imap_home_namespace
              3.82. imap_idle
              3.83. imap_keepalive
              3.84. imap_list_subscribed
              3.85. imap_login
              3.86. imap_pass
              3.87. imap_passive
              3.88. imap_peek
              3.89. imap_servernoise
              3.90. imap_user
              3.91. implicit_autoview
              3.92. include
              3.93. include_onlyfirst
              3.94. indent_string
              3.95. index_format
              3.96. ispell
              3.97. keep_flagged
              3.98. locale
              3.99. mail_check
              3.100. mailcap_path
              3.101. mailcap_sanitize
              3.102. header_cache
              3.103. maildir_header_cache_verify
              3.104. header_cache_pagesize
              3.105. header_cache_compress
              3.106. maildir_trash
              3.107. mark_old
              3.108. markers
              3.109. mask
              3.110. mbox
              3.111. mbox_type
              3.112. metoo
              3.113. menu_context
              3.114. menu_move_off
              3.115. menu_scroll
              3.116. meta_key
              3.117. mh_purge
              3.118. mh_seq_flagged
              3.119. mh_seq_replied
              3.120. mh_seq_unseen
              3.121. mime_forward
              3.122. mime_forward_decode
              3.123. mime_forward_rest
              3.124. mix_entry_format
              3.125. mixmaster
              3.126. move
              3.127. message_cachedir
              3.128. message_format
              3.129. narrow_tree
              3.130. net_inc
              3.131. pager
              3.132. pager_context
              3.133. pager_format
              3.134. pager_index_lines
              3.135. pager_stop
              3.136. crypt_autosign
              3.137. crypt_autoencrypt
              3.138. pgp_ignore_subkeys
              3.139. crypt_replyencrypt
              3.140. crypt_replysign
              3.141. crypt_replysignencrypted
              3.142. crypt_timestamp
              3.143. pgp_use_gpg_agent
              3.144. crypt_verify_sig
              3.145. smime_is_default
              3.146. smime_ask_cert_label
              3.147. smime_decrypt_use_default_key
              3.148. pgp_entry_format
              3.149. pgp_good_sign
              3.150. pgp_check_exit
              3.151. pgp_long_ids
              3.152. pgp_retainable_sigs
              3.153. pgp_autoinline
              3.154. pgp_replyinline
              3.155. pgp_show_unusable
              3.156. pgp_sign_as
              3.157. pgp_strict_enc
              3.158. pgp_timeout
              3.159. pgp_sort_keys
              3.160. pgp_mime_auto
              3.161. pgp_auto_decode
              3.162. pgp_decode_command
              3.163. pgp_getkeys_command
              3.164. pgp_verify_command
              3.165. pgp_decrypt_command
              3.166. pgp_clearsign_command
              3.167. pgp_sign_command
              3.168. pgp_encrypt_sign_command
              3.169. pgp_encrypt_only_command
              3.170. pgp_import_command
              3.171. pgp_export_command
              3.172. pgp_verify_key_command
              3.173. pgp_list_secring_command
              3.174. pgp_list_pubring_command
              3.175. forward_decrypt
              3.176. smime_timeout
              3.177. smime_encrypt_with
              3.178. smime_keys
              3.179. smime_ca_location
              3.180. smime_certificates
              3.181. smime_decrypt_command
              3.182. smime_verify_command
              3.183. smime_verify_opaque_command
              3.184. smime_sign_command
              3.185. smime_sign_opaque_command
              3.186. smime_encrypt_command
              3.187. smime_pk7out_command
              3.188. smime_get_cert_command
              3.189. smime_get_signer_cert_command
              3.190. smime_import_cert_command
              3.191. smime_get_cert_email_command
              3.192. smime_default_key
              3.193. ssl_client_cert
              3.194. ssl_force_tls
              3.195. ssl_starttls
              3.196. certificate_file
              3.197. ssl_usesystemcerts
              3.198. entropy_file
              3.199. ssl_use_sslv2
              3.200. ssl_use_sslv3
              3.201. ssl_use_tlsv1
              3.202. ssl_min_dh_prime_bits
              3.203. ssl_ca_certificates_file
              3.204. pipe_split
              3.205. pipe_decode
              3.206. pipe_sep
              3.207. pop_authenticators
              3.208. pop_auth_try_all
              3.209. pop_checkinterval
              3.210. pop_delete
              3.211. pop_host
              3.212. pop_last
              3.213. pop_reconnect
              3.214. pop_user
              3.215. pop_pass
              3.216. post_indent_string
              3.217. postpone
              3.218. postponed
              3.219. preconnect
              3.220. print
              3.221. print_command
              3.222. print_decode
              3.223. print_split
              3.224. prompt_after
              3.225. query_command
              3.226. quit
              3.227. quote_regexp
              3.228. read_inc
              3.229. read_only
              3.230. realname
              3.231. recall
              3.232. record
              3.233. reply_regexp
              3.234. reply_self
              3.235. reply_to
              3.236. resolve
              3.237. reverse_alias
              3.238. reverse_name
              3.239. reverse_realname
              3.240. rfc2047_parameters
              3.241. save_address
              3.242. save_empty
              3.243. save_name
              3.244. score
              3.245. score_threshold_delete
              3.246. score_threshold_flag
              3.247. score_threshold_read
              3.248. send_charset
              3.249. sendmail
              3.250. sendmail_wait
              3.251. shell
              3.252. sig_dashes
              3.253. sig_on_top
              3.254. signature
              3.255. simple_search
              3.256. smart_wrap
              3.257. smileys
              3.258. sleep_time
              3.259. sort
              3.260. sort_alias
              3.261. sort_aux
              3.262. sort_browser
              3.263. sort_re
              3.264. spam_separator
              3.265. spoolfile
              3.266. status_chars
              3.267. status_format
              3.268. status_on_top
              3.269. strict_threads
              3.270. suspend
              3.271. text_flowed
              3.272. thread_received
              3.273. thorough_search
              3.274. tilde
              3.275. timeout
              3.276. tmpdir
              3.277. to_chars
              3.278. tunnel
              3.279. use_8bitmime
              3.280. use_domain
              3.281. use_envelope_from
              3.282. use_from
              3.283. use_idn
              3.284. use_ipv6
              3.285. user_agent
              3.286. visual
              3.287. wait_key
              3.288. weed
              3.289. wrap_search
              3.290. wrapmargin
              3.291. write_inc
              3.292. write_bcc

        4. Functions

              4.1. generic
              4.2. index
              4.3. pager
              4.4. alias
              4.5. query
              4.6. attach
              4.7. compose
              4.8. postpone
              4.9. browser
              4.10. pgp
              4.11. editor

   7. Miscellany

        1. Acknowledgements
        2. About this document

   List of Tables

   2.1. Most common navigation keys
   2.2. Most common line editor keys
   2.3. Most common message index keys
   2.4. Most common pager keys
   2.5. Most common thread mode keys
   2.6. Most common mail sending keys
   2.7. Most common compose menu keys
   2.8. PGP key menu flags
   2.9. Message forwarding/bouncing keys
   3.1. Symbolic key names
   4.1. Pattern modifiers
   6.1. Command line options
   6.2. Default generic function bindings
   6.3. Default index menu function bindings
   6.4. Default pager menu function bindings
   6.5. Default alias menu function bindings
   6.6. Default query menu function bindings
   6.7. Default attach menu function bindings
   6.8. Default compose menu function bindings
   6.9. Default postpone menu function bindings
   6.10. Default browser menu function bindings
   6.11. Default pgp menu function bindings
   6.12. Default editor function bindings

Chapter 1. Introduction

   Table of Contents

   1. Mutt Home Page
   2. Mailing Lists
   3. Software Distribution Sites
   4. IRC
   5. USENET
   6. Copyright

   Mutt is a small but very powerful text-based MIME mail client. Mutt is
   highly configurable, and is well suited to the mail power user with advanced
   features  like  key bindings, keyboard macros, mail threading, regular
   expression searches and a powerful pattern matching language for selecting
   groups of messages.

1. Mutt Home Page

   http://www.mutt.org/

2. Mailing Lists

   To subscribe to one of the following mailing lists, send a message with the
   word subscribe in the body to list-name-request@mutt.org.

     * <mutt-announce-request@mutt.org> -- low traffic list for announcements
     * <mutt-users-request@mutt.org> -- help, bug reports and feature requests
     * <mutt-dev-request@mutt.org> -- development mailing list

   Note: all messages posted to mutt-announce are automatically forwarded to
   mutt-users, so you do not need to be subscribed to both lists.

3. Software Distribution Sites

     * ftp://ftp.mutt.org/mutt/

   For a list of mirror sites, please refer to
   http://www.mutt.org/download.html.

4. IRC

   Visit channel #mutt on irc.freenode.net to chat with other people interested
   in Mutt.

5. USENET

   See the newsgroup comp.mail.mutt.

6. Copyright

   Mutt is Copyright (C) 1996-2005 Michael R. Elkins <me@cs.hmc.edu> and others

   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 2 of the License, or (at your option)
   any later version.

   This program is distributed in the hope that it will be useful, but WITHOUT
   ANY  WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
   more details.

   You should have received a copy of the GNU General Public License along with
   this  program; if not, write to the Free Software Foundation, Inc., 51
   Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Chapter 2. Getting Started

   Table of Contents

   1. Moving Around in Menus
   2. Editing Input Fields

        2.1. Introduction
        2.2. History

   3. Reading Mail - The Index and Pager

        3.1. The Message Index
        3.2. The Pager
        3.3. Threaded Mode
        3.4. Miscellaneous Functions

   4. Sending Mail

        4.1. Editing the message header
        4.2. Using Mutt with PGP
        4.3. Sending anonymous messages via mixmaster.

   5. Forwarding and Bouncing Mail
   6. Postponing Mail

   This section is intended as a brief overview of how to use Mutt. There are
   many other features which are described elsewhere in the manual. There is
   even more information available in the Mutt FAQ and various web pages. See
   the Mutt Page for more details.

   The keybindings described in this section are the defaults as distributed.
   Your local system administrator may have altered the defaults for your site.
   You can always type ``?'' in any menu to display the current bindings.

   The first thing you need to do is invoke mutt, simply by typing mutt at the
   command line. There are various command-line options, see either the mutt
   man page or the reference.

1. Moving Around in Menus

   Information is presented in menus, very similar to ELM. Here is a table
   showing the common keys used to navigate menus in Mutt.

   Table 2.1. Most common navigation keys
       Key        Function                   Description
   j or Down   next-entry     move to the next entry
   k or Up     previous-entry move to the previous entry
   z or PageDn page-down      go to the next page
   Z or PageUp page-up        go to the previous page
   = or Home   first-entry    jump to the first entry
   * or End    last-entry     jump to the last entry
   q           quit           exit the current menu
   ?           help           list all keybindings for the current menu

2. Editing Input Fields

2.1. Introduction

   Mutt has a built-in line editor for inputting text, e.g. email addresses or
   filenames. The keys used to manipulate text input are very similar to those
   of  Emacs.  See  the following table for a full reference of available
   functions, their default key bindings, and short descriptions.

   Table 2.2. Most common line editor keys
        Key          Function                 Description
   ^A or <Home>   bol             move to the start of the line
   ^B or <Left>   backward-char   move back one char
   Esc B          backward-word   move back one word
   ^D or <Delete> delete-char     delete the char under the cursor
   ^E or <End>    eol             move to the end of the line
   ^F or <Right>  forward-char    move forward one char
   Esc F          forward-word    move forward one word
   <Tab>          complete        complete filename or alias
   ^T             complete-query  complete address with query
   ^K             kill-eol        delete to the end of the line
   ESC d          kill-eow        delete to the end ot the word
   ^W             kill-word       kill the word in front of the cursor
   ^U             kill-line       delete entire line
   ^V             quote-char      quote the next typed key
   <Up>           history-up      recall previous string from history
   <Down>         history-down    recall next string from history
   <BackSpace>    backspace       kill the char in front of the cursor
   Esc u          upcase-word     convert word to upper case
   Esc l          downcase-word   convert word to lower case
   Esc c          capitalize-word capitalize the word
   ^G             n/a             abort
   <Return>       n/a             finish editing

   You can remap the editor functions using the bind command. For example, to
   make the Delete key delete the character in front of the cursor rather than
   under, you could use
bind editor <delete> backspace

2.2. History

   The number of items in the built-in editor's history is controlled by the
   $history variable. You may cycle through them at an editor prompt by using
   the history-up and/or history-down commands.

   Mutt maintains several distinct history lists, one for each of the following
   categories:

     * muttrc commands
     * addresses and aliases
     * shell commands
     * filenames
     * patterns
     * everything else

   Mutt automatically filters out repeated items from the history. It also
   mimics the behavior of some shells by ignoring items starting with a space.

   The latter feature can be useful in macros to not clobber the history's
   valuable entries with unwanted entries.

3. Reading Mail - The Index and Pager

   Similar to many other mail clients, there are two modes in which mail is
   read in Mutt. The first is the index of messages in the mailbox, which is
   called the ``index'' in Mutt. The second mode is the display of the message
   contents. This is called the ``pager.''

   The next few sections describe the functions provided in each of these
   modes.

3.1. The Message Index

   Table 2.3. Most common message index keys
     Key                    Description
   c        change to a different mailbox
   ESC c    change to a folder in read-only mode
   C        copy the current message to another mailbox
   ESC C    decode a message and copy it to a folder
   ESC s    decode a message and save it to a folder
   D        delete messages matching a pattern
   d        delete the current message
   F        mark as important
   l        show messages matching a pattern
   N        mark message as new
   o        change the current sort method
   O        reverse sort the mailbox
   q        save changes and exit
   s        save-message
   T        tag messages matching a pattern
   t        toggle the tag on a message
   ESC t    toggle tag on entire message thread
   U        undelete messages matching a pattern
   u        undelete-message
   v        view-attachments
   x        abort changes and exit
   <Return> display-message
   <Tab>    jump to the next new or unread message
   @        show the author's full e-mail address
   $        save changes to mailbox
   /        search
   ESC /    search-reverse
   ^L       clear and redraw the screen
   ^T       untag messages matching a pattern

3.1.1. Status Flags

   In addition to who sent the message and the subject, a short summary of the
   disposition of each message is printed beside the message number. Zero or
   more of the following ``flags'' may appear, which mean:

   D
          message is deleted (is marked for deletion)

   d
          message have attachments marked for deletion

   K
          contains a PGP public key

   N
          message is new

   O
          message is old

   P
          message is PGP encrypted

   r
          message has been replied to

   S
          message is signed, and the signature is successfully verified

   s
          message is signed

   !
          message is flagged

   *
          message is tagged

   Some of the status flags can be turned on or off using
     * set-flag (default: w)
     * clear-flag (default: W)

   Furthermore, the following flags reflect who the message is addressed to.
   They can be customized with the $to_chars variable.

   +
          message is to you and you only

   T
          message is to you, but also to or cc'ed to others

   C
          message is cc'ed to you

   F
          message is from you

   L
          message is sent to a subscribed mailing list

3.2. The Pager

   By default, Mutt uses its builtin pager to display the body of messages. The
   pager  is  very  similar to the Unix program less though not nearly as
   featureful.

   Table 2.4. Most common pager keys
     Key                               Description
   <Return> go down one line
   <Space>  display the next page (or next message if at the end of a message)
   -        go back to the previous page
   n        search for next match
   S        skip beyond quoted text
   T        toggle display of quoted text
   ?        show keybindings
   /        search for a regular expression (pattern)
   ESC /    search backwards for a regular expression
   \        toggle search pattern coloring
   ^        jump to the top of the message

   In addition, many of the functions from the index are available in the
   pager, such as delete-message or copy-message (this is one advantage over
   using an external pager to view messages).

   Also, the internal pager supports a couple other advanced features. For one,
   it will accept and translate the ``standard'' nroff sequences for bold and
   underline. These sequences are a series of either the letter, backspace
   (^H), the letter again for bold or the letter, backspace, ``_'' for denoting
   underline.  Mutt  will  attempt to display these in bold and underline
   respectively if your terminal supports them. If not, you can use the bold
   and underline color objects to specify a color or mono attribute for them.

   Additionally, the internal pager supports the ANSI escape sequences for
   character  attributes. Mutt translates them into the correct color and
   character settings. The sequences Mutt supports are:

ESC [ Ps;Ps;Ps;...;Ps m where Ps =
0    All Attributes Off
1    Bold on
4    Underline on
5    Blink on
7    Reverse video on
3x   Foreground color is x
4x   Background color is x

Colors are
0    black
1    red
2    green
3    yellow
4    blue
5    magenta
6    cyan
7    white

   Mutt uses these attributes for handling text/enriched messages, and they can
   also be used by an external autoview script for highlighting purposes. Note:
   If you change the colors for your display, for example by changing the color
   associated with color2 for your xterm, then that color will be used instead
   of green.

3.3. Threaded Mode

   When the mailbox is sorted by threads, there are a few additional functions
   available in the index and pager modes.

   Table 2.5. Most common thread mode keys
    Key       Function                       Description
   ^D    delete-thread      delete all messages in the current thread
   ^U    undelete-thread    undelete all messages in the current thread
   ^N    next-thread        jump to the start of the next thread
   ^P    previous-thread    jump to the start of the previous thread
   ^R    read-thread        mark the current thread as read
   ESC d delete-subthread   delete all messages in the current subthread
   ESC u undelete-subthread undelete all messages in the current subthread
   ESC n next-subthread     jump to the start of the next subthread
   ESC p previous-subthread jump to the start of the previous subthread
   ESC r read-subthread     mark the current subthread as read
   ESC t tag-thread         toggle the tag on the current thread
   ESC v collapse-thread    toggle collapse for the current thread
   ESC V collapse-all       toggle collapse for all threads
   P     parent-message     jump to parent message in thread

   Note: Collapsing a thread displays only the first message in the thread and
   hides the others. This is useful when threads contain so many messages that
   you  can  only  see  a  handful  of  threads  on the screen. See %M in
   $index_format.  For  example,  you  could  use "%?M?(#%03M)&(%4l)?" in
   $index_format to optionally display the number of hidden messages if the
   thread is collapsed.

   See also: $strict_threads.

3.4. Miscellaneous Functions

   create-alias (default: a)

   Creates a new alias based upon the current message (or prompts for a new
   one).  Once editing is complete, an alias command is added to the file
   specified by the $alias_file variable for future use. Note: Specifying an
   $alias_file does not add the aliases specified there-in, you must also
   source the file.

   check-traditional-pgp (default: ESC P)

   This  function  will  search the current message for content signed or
   encrypted with PGP the "traditional" way, that is, without proper MIME
   tagging. Technically, this function will temporarily change the MIME content
   types  of  the  body parts containing PGP data; this is similar to the
   edit-type function's effect.

   display-toggle-weed (default: h)

   Toggles the weeding of message header fields specified by ignore commands.

   edit (default: e)

   This command (available in the ``index'' and ``pager'') allows you to edit
   the raw current message as it's present in the mail folder. After you have
   finished  editing, the changed message will be appended to the current
   folder, and the original message will be marked for deletion.

   edit-type (default: ^E on the attachment menu, and in the pager and index
   menus; ^T on the compose menu)

   This command is used to temporarily edit an attachment's content type to
   fix, for instance, bogus character set parameters. When invoked from the
   index or from the pager, you'll have the opportunity to edit the top-level
   attachment's  content type. On the attachment menu, you can change any
   attachment's content type. These changes are not persistent, and get lost
   upon changing folders.

   Note that this command is also available on the compose menu. There, it's
   used to fine-tune the properties of attachments you are going to send.

   enter-command (default: ``:'')

   This command is used to execute any command you would normally put in a
   configuration file. A common use is to check the settings of variables, or
   in conjunction with macros to change settings on the fly.

   extract-keys (default: ^K)

   This command extracts PGP public keys from the current or tagged message(s)
   and adds them to your PGP public key ring.

   forget-passphrase (default: ^F)

   This command wipes the passphrase(s) from memory. It is useful, if you
   misspelled the passphrase.

   list-reply (default: L)

   Reply to the current or tagged message(s) by extracting any addresses which
   match the regular expressions given by the lists or subscribe commands, but
   also  honor  any  Mail-Followup-To header(s) if the $honor_followup_to
   configuration variable is set. Using this when replying to messages posted
   to mailing lists helps avoid duplicate copies being sent to the author of
   the message you are replying to.

   pipe-message (default: |)

   Asks for an external Unix command and pipes the current or tagged message(s)
   to it. The variables $pipe_decode, $pipe_split, $pipe_sep and $wait_key
   control the exact behavior of this function.

   resend-message (default: ESC e)

   With resend-message, mutt takes the current message as a template for a new
   message. This function is best described as "recall from arbitrary folders".
   It can conveniently be used to forward MIME messages while preserving the
   original mail structure. Note that the amount of headers included here
   depends on the value of the $weed variable.

   This function is also available from the attachment menu. You can use this
   to easily resend a message which was included with a bounce message as a
   message/rfc822 body part.

   shell-escape (default: !)

   Asks for an external Unix command and executes it. The $wait_key can be used
   to control whether Mutt will wait for a key to be pressed when the command
   returns (presumably to let the user read the output of the command), based
   on the return status of the named command.

   toggle-quoted (default: T)

   The  pager  uses the $quote_regexp variable to detect quoted text when
   displaying the body of the message. This function toggles the display of the
   quoted  material  in  the  message. It is particularly useful when are
   interested in just the response and there is a large amount of quoted text
   in the way.

   skip-quoted (default: S)

   This function will go to the next line of non-quoted text which come after a
   line of quoted text in the internal pager.

4. Sending Mail

   The following bindings are available in the index for sending messages.

   Table 2.6. Most common mail sending keys
    Key   Function             Description
   m     compose     compose a new message
   r     reply       reply to sender
   g     group-reply reply to all recipients
   L     list-reply  reply to mailing list address
   f     forward     forward message
   b     bounce      bounce (remail) message
   ESC k mail-key    mail a PGP public key to someone

   Bouncing a message sends the message as is to the recipient you specify.
   Forwarding a message allows you to add comments or modify the message you
   are forwarding. These items are discussed in greater detail in the next
   chapter ``Forwarding and Bouncing Mail.''

   Mutt will then enter the compose menu and prompt you for the recipients to
   place  on  the  ``To:''  header  field.  Next, it will ask you for the
   ``Subject:'' field for the message, providing a default if you are replying
   to or forwarding a message. See also $askcc, $askbcc, $autoedit, $bounce,
   $fast_reply, and $include for changing how Mutt asks these questions.

   Mutt will then automatically start your $editor on the message body. If the
   $edit_headers variable is set, the headers will be at the top of the message
   in your editor. Any messages you are replying to will be added in sort order
   to  the  message,  with  appropriate  $attribution, $indent_string and
   $post_indent_string.  When  forwarding a message, if the $mime_forward
   variable is unset, a copy of the forwarded message will be included. If you
   have specified a $signature, it will be appended to the message.

   Once  you have finished editing the body of your mail message, you are
   returned to the compose menu. The following functions are available:

   Table 2.7. Most common compose menu keys
    Key      Function                      Description
   a     attach-file       attach a file
   A     attach-message    attach message(s) to the message
   ESC k attach-key        attach a PGP public key
   d     edit-description  edit description on attachment
   D     detach-file       detach a file
   t     edit-to           edit the To field
   ESC f edit-from         edit the From field
   r     edit-reply-to     edit the Reply-To field
   c     edit-cc           edit the Cc field
   b     edit-bcc          edit the Bcc field
   y     send-message      send the message
   s     edit-subject      edit the Subject
   S     smime-menu        select S/MIME options
   f     edit-fcc          specify an ``Fcc'' mailbox
   p     pgp-menu          select PGP options
   P     postpone-message  postpone this message until later
   q     quit              quit (abort) sending the message
   w     write-fcc         write the message to a folder
   i     ispell            check spelling (if available on your system)
   ^F    forget-passphrase wipe passphrase(s) from memory

   Note: The attach-message function will prompt you for a folder to attach
   messages from. You can now tag messages in that folder and they will be
   attached to the message you are sending. Note that certain operations like
   composing a new mail, replying, forwarding, etc. are not permitted when you
   are  in  that folder. The %r in $status_format will change to a 'A' to
   indicate that you are in attach-message mode.

4.1. Editing the message header

   When editing the header of your outgoing message, there are a couple of
   special features available.

   If you specify Fcc: filename Mutt will pick up filename just as if you had
   used the edit-fcc function in the compose menu.

   You can also attach files to your message by specifying Attach: filename [
   description ] where filename is the file to attach and description is an
   optional string to use as the description of the attached file.

   When replying to messages, if you remove the In-Reply-To: field from the
   header field, Mutt will not generate a References: field, which allows you
   to create a new message thread.

   Also see $edit_headers.

4.2. Using Mutt with PGP

   If you want to use PGP, you can specify

   Pgp: [ E | S | S<id> ]

   ``E'' encrypts, ``S'' signs and ``S<id>'' signs with the given key, setting
   $pgp_sign_as permanently.

   If you have told mutt to PGP encrypt a message, it will guide you through a
   key selection process when you try to send the message. Mutt will not ask
   you any questions about keys which have a certified user ID matching one of
   the message recipients' mail addresses. However, there may be situations in
   which there are several keys, weakly certified user ID fields, or where no
   matching keys can be found.

   In these cases, you are dropped into a menu with a list of keys from which
   you can select one. When you quit this menu, or mutt can't find any matching
   keys, you are prompted for a user ID. You can, as usually, abort this prompt
   using ^G. When you do so, mutt will return to the compose screen.

   Once you have successfully finished the key selection, the message will be
   encrypted using the selected public keys, and sent out.

   Most  fields  of  the  entries  in  the  key  selection menu (see also
   $pgp_entry_format) have obvious meanings. But some explanations on the
   capabilities, flags, and validity fields are in order.

   The flags sequence (%f) will expand to one of the following flags:

   Table 2.8. PGP key menu flags
   Flag                    Description
   R    The key has been revoked and can't be used.
   X    The key is expired and can't be used.
   d    You have marked the key as disabled.
   c    There are unknown critical self-signature packets.

   The capabilities field (%c) expands to a two-character sequence representing
   a  key's  capabilities. The first character gives the key's encryption
   capabilities:  A  minus sign (-) means that the key cannot be used for
   encryption. A dot (.) means that it's marked as a signature key in one of
   the user IDs, but may also be used for encryption. The letter e indicates
   that this key can be used for encryption.

   The second character indicates the key's signing capabilities. Once again, a
   ``-'' implies ``not for signing'', ``.'' implies that the key is marked as
   an encryption key in one of the user-ids, and ``s'' denotes a key which can
   be used for signing.

   Finally, the validity field (%t) indicates how well-certified a user-id is.
   A question mark (?) indicates undefined validity, a minus character (-)
   marks an untrusted association, a space character means a partially trusted
   association, and a plus character (+) indicates complete validity.

4.3. Sending anonymous messages via mixmaster.

   You may also have configured mutt to co-operate with Mixmaster, an anonymous
   remailer. Mixmaster permits you to send your messages anonymously using a
   chain of remailers. Mixmaster support in mutt is for mixmaster version 2.04
   (beta 45 appears to be the latest) and 2.03. It does not support earlier
   versions or the later so-called version 3 betas, of which the latest appears
   to be called 2.9b23.

   To use it, you'll have to obey certain restrictions. Most important, you
   cannot use the Cc and Bcc headers. To tell Mutt to use mixmaster, you have
   to select a remailer chain, using the mix function on the compose menu.

   The chain selection screen is divided into two parts. In the (larger) upper
   part, you get a list of remailers you may use. In the lower part, you see
   the currently selected chain of remailers.

   You can navigate in the chain using the chain-prev and chain-next functions,
   which are by default bound to the left and right arrows and to the h and l
   keys (think vi keyboard bindings). To insert a remailer at the current chain
   position, use the insert function. To append a remailer behind the current
   chain position, use select-entry or append. You can also delete entries from
   the  chain, using the corresponding function. Finally, to abandon your
   changes, leave the menu, or accept them pressing (by default) the Return
   key.

   Note that different remailers do have different capabilities, indicated in
   the  %c entry of the remailer menu lines (see $mix_entry_format). Most
   important is the ``middleman'' capability, indicated by a capital ``M'':
   This means that the remailer in question cannot be used as the final element
   of a chain, but will only forward messages to other mixmaster remailers. For
   details on the other capabilities, please have a look at the mixmaster
   documentation.

5. Forwarding and Bouncing Mail

   Bouncing and forwarding let you send an existing message to recipients that
   you specify. Bouncing a message uses the $sendmail command to send a copy to
   alternative addresses as if they were the message's original recipients.
   Forwarding a message, on the other hand, allows you to modify the message
   before it is resent (for example, by adding your own comments).

   The following keys are bound by default:

   Table 2.9. Message forwarding/bouncing keys
   Key Function       Description
   f   forward  forward message
   b   bounce   bounce (remail) message

   Forwarding  can  be  done by including the original message in the new
   message's body (surrounded by indicating lines) or including it as a MIME
   attachment, depending on the value of the $mime_forward variable. Decoding
   of attachments, like in the pager, can be controlled by the $forward_decode
   and $mime_forward_decode variables, respectively. The desired forwarding
   format may depend on the content, therefore $mime_forward is a quadoption
   which, for example, can be set to ``ask-no''.

   The inclusion of headers is controlled by the current setting of the $weed
   variable, unless $mime_forward is set.

   Editing the message to forward follows the same procedure as sending or
   replying to a message does.

6. Postponing Mail

   At times it is desirable to delay sending a message that you have already
   begun to compose. When the postpone-message function is used in the compose
   menu, the body of your message and attachments are stored in the mailbox
   specified by the $postponed variable. This means that you can recall the
   message even if you exit Mutt and then restart it at a later time.

   Once a message is postponed, there are several ways to resume it. From the
   command line you can use the ``-p'' option, or if you compose a new message
   from the index or pager you will be prompted if postponed messages exist. If
   multiple messages are currently postponed, the postponed menu will pop up
   and you can select which message you would like to resume.

   Note: If you postpone a reply to a message, the reply setting of the message
   is only updated when you actually finish the message and send it. Also, you
   must be in the same folder with the message you replied to for the status of
   the message to be updated.

   See also the $postpone quad-option.

Chapter 3. Configuration

   Table of Contents

   1. Syntax of Initialization Files
   2. Defining/Using aliases
   3. Changing the default key bindings
   4. Defining aliases for character sets 
   5. Setting variables based upon mailbox
   6. Keyboard macros
   7. Using color and mono video attributes
   8. Ignoring (weeding) unwanted message headers
   9. Alternative addresses
   10. Mailing lists
   11. Using Multiple spool mailboxes
   12. Defining mailboxes which receive mail
   13. User defined headers
   14. Defining the order of headers when viewing messages
   15. Specify default save filename
   16. Specify default Fcc: mailbox when composing
   17. Specify default save filename and default Fcc: mailbox at once
   18. Change settings based upon message recipients
   19. Change settings before formatting a message
   20. Choosing the cryptographic key of the recipient
   21. Adding key sequences to the keyboard buffer
   22. Executing functions
   23. Message Scoring
   24. Spam detection
   25. Setting and Querying Variables

        25.1. Commands
        25.2. User-defined variables

   26. Reading initialization commands from another file
   27. Removing hooks

   While the default configuration (or ``preferences'') make Mutt usable right
   out  of the box, it is often desirable to tailor Mutt to suit your own
   tastes. When Mutt is first invoked, it will attempt to read the ``system''
   configuration file (defaults set by your local system administrator), unless
   the  ``-n''  command  line option is specified. This file is typically
   /usr/local/share/mutt/Muttrc or /etc/Muttrc. Mutt will next look for a file
   named .muttrc in your home directory. If this file does not exist and your
   home directory has a subdirectory named .mutt, mutt try to load a file named
   .mutt/muttrc.

   .muttrc is the file where you will usually place your commands to configure
   Mutt.

   In addition, mutt supports version specific configuration files that are
   parsed instead of the default files as explained above. For instance, if
   your system has a Muttrc-0.88 file in the system configuration directory,
   and you are running version 0.88 of mutt, this file will be sourced instead
   of the Muttrc file. The same is true of the user configuration file, if you
   have a file .muttrc-0.88.6 in your home directory, when you run mutt version
   0.88.6, it will source this file instead of the default .muttrc file. The
   version number is the same which is visible using the ``-v'' command line
   switch or using the show-version key (default: V) from the index menu.

1. Syntax of Initialization Files

   An initialization file consists of a series of commands. Each line of the
   file may contain one or more commands. When multiple commands are used, they
   must be separated by a semicolon (;).
set realname='Mutt user' ; ignore x-

   The hash mark, or pound sign (``#''), is used as a ``comment'' character.
   You can use it to annotate your initialization file. All text after the
   comment character to the end of the line is ignored. For example,

my_hdr X-Disclaimer: Why are you listening to me? # This is a comment

   Single quotes (') and double quotes (") can be used to quote strings which
   contain spaces or other special characters. The difference between the two
   types of quotes is similar to that of many popular shell programs, namely
   that a single quote is used to specify a literal string (one that is not
   interpreted  for shell variables or quoting with a backslash [see next
   paragraph]), while double quotes indicate a string for which should be
   evaluated. For example, backtics are evaluated inside of double quotes, but
   not for single quotes.

   \ quotes the next character, just as in shells such as bash and zsh. For
   example, if want to put quotes ``"'' inside of a string, you can use ``\''
   to  force  the  next  character to be a literal instead of interpreted
   character.
set realname="Michael \"MuttDude\" Elkins"

   ``\\'' means to insert a literal ``\'' into the line. ``\n'' and ``\r'' have
   their usual C meanings of linefeed and carriage-return, respectively.

   A \ at the end of a line can be used to split commands over multiple lines,
   provided that the split points don't appear in the middle of command names.

   It  is  also possible to substitute the output of a Unix command in an
   initialization  file. This is accomplished by enclosing the command in
   backquotes (``). For example,
my_hdr X-Operating-System: `uname -a`

   The output of the Unix command ``uname -a'' will be substituted before the
   line is parsed. Note that since initialization files are line oriented, only
   the first line of output from the Unix command will be substituted.

   Both environment variables and mutt variables can be accessed by prepending
   ``$'' to the name of the variable. For example,
set record=+sent_on_$HOSTNAME

   will   cause  mutt  to  save  outgoing  messages  to  a  folder  named
   ``sent_on_kremvax''  if  the  environment  variable HOSTNAME is set to
   ``kremvax.'' (See $record for details.)

   Mutt expands the variable when it is assigned, not when it is used. If the
   value of a variable on the right-hand side of an assignment changes after
   the assignment, the variable on the left-hand side will not be affected.

   The commands understood by mutt are explained in the next paragraphs. For a
   complete list, see the command reference.

2. Defining/Using aliases

   Usage: alias key address [ , address, ... ]

   It's usually very cumbersome to remember or type out the address of someone
   you are communicating with. Mutt allows you to create ``aliases'' which map
   a short string to a full address.

   Note: if you want to create an alias for a group (by specifying more than
   one address), you must separate the addresses with a comma (``,'').

   To remove an alias or aliases (``*'' means all aliases):

   unalias [ * | key ... ]

alias muttdude me@cs.hmc.edu (Michael Elkins)
alias theguys manny, moe, jack

   Unlike  other mailers, Mutt doesn't require aliases to be defined in a
   special file. The alias command can appear anywhere in a configuration file,
   as long as this file is sourced. Consequently, you can have multiple alias
   files, or you can have all aliases defined in your muttrc.

   On the other hand, the create-alias function can use only one file, the one
   pointed to by the $alias_file variable (which is ˜/.muttrc by default). This
   file is not special either, in the sense that Mutt will happily append
   aliases to any file, but in order for the new aliases to take effect you
   need to explicitly source this file too.

   For example:

source /usr/local/share/Mutt.aliases
source ~/.mail_aliases
set alias_file=~/.mail_aliases

   To use aliases, you merely use the alias at any place in mutt where mutt
   prompts for addresses, such as the To: or Cc: prompt. You can also enter
   aliases  in  your  editor  at  the appropriate headers if you have the
   $edit_headers variable set.

   In addition, at the various address prompts, you can use the tab character
   to expand a partial alias to the full alias. If there are multiple matches,
   mutt  will  bring  up a menu with the matching aliases. In order to be
   presented with the full list of aliases, you must hit tab with out a partial
   alias, such as at the beginning of the prompt or after a comma denoting
   multiple addresses.

   In the alias menu, you can select as many aliases as you want with the
   select-entry key (default: RET), and use the exit key (default: q) to return
   to the address prompt.

3. Changing the default key bindings

   Usage: bind map key function

   This  command allows you to change the default key bindings (operation
   invoked when pressing a key).

   map  specifies in which menu the binding belongs. Multiple maps may be
   specified  by separating them with commas (no additional whitespace is
   allowed). The currently defined maps are:

   generic
          This is not a real menu, but is used as a fallback for all of the
          other menus except for the pager and editor modes. If a key is not
          defined in another menu, Mutt will look for a binding to use in this
          menu. This allows you to bind a key to a certain function in multiple
          menus instead of having multiple bind statements to accomplish the
          same task.

   alias
          The alias menu is the list of your personal aliases as defined in
          your muttrc. It is the mapping from a short alias name to the full
          email address(es) of the recipient(s).

   attach
          The attachment menu is used to access the attachments on received
          messages.

   browser
          The browser is used for both browsing the local directory structure,
          and for listing all of your incoming mailboxes.

   editor
          The editor is the line-based editor the user enters text data.

   index
          The index is the list of messages contained in a mailbox.

   compose
          The compose menu is the screen used when sending a new message.

   pager
          The pager is the mode used to display message/attachment data, and
          help listings.

   pgp
          The pgp menu is used to select the OpenPGP keys used for encrypting
          outgoing messages.

   postpone
          The postpone menu is similar to the index menu, except is used when
          recalling a message the user was composing, but saved until later.

   key is the key (or key sequence) you wish to bind. To specify a control
   character,  use the sequence \Cx, where x is the letter of the control
   character (for example, to specify control-A use ``\Ca''). Note that the
   case of x as well as \C is ignored, so that \CA, \Ca, \cA and \ca are all
   equivalent. An alternative form is to specify the key as a three digit octal
   number prefixed with a ``\'' (for example \177 is equivalent to \c?).

   In addition, key may consist of:

   Table 3.1. Symbolic key names
   Symbolic name       Meaning
   \t            tab
   <tab>         tab
   <backtab>     backtab / shift-tab
   \r            carriage return
   \n            newline
   \e            escape
   <esc>         escape
   <up>          up arrow
   <down>        down arrow
   <left>        left arrow
   <right>       right arrow
   <pageup>      Page Up
   <pagedown>    Page Down
   <backspace>   Backspace
   <delete>      Delete
   <insert>      Insert
   <enter>       Enter
   <return>      Return
   <home>        Home
   <end>         End
   <space>       Space bar
   <f1>          function key 1
   <f10>         function key 10

   key does not need to be enclosed in quotes unless it contains a space (``
   '').

   function specifies which action to take when key is pressed. For a complete
   list of functions, see the reference. The special function noop unbinds the
   specified key sequence.

4. Defining aliases for character sets

   Usage: charset-hook alias charset
   Usage: iconv-hook charset local-charset

   The charset-hook command defines an alias for a character set. This is
   useful to properly display messages which are tagged with a character set
   name not known to mutt.

   The iconv-hook command defines a system-specific name for a character set.
   This is helpful when your systems character conversion library insists on
   using strange, system-specific names for character sets.

5. Setting variables based upon mailbox

   Usage: folder-hook [!]regexp command

   It is often desirable to change settings based on which mailbox you are
   reading. The folder-hook command provides a method by which you can execute
   any configuration command. regexp is a regular expression specifying in
   which mailboxes to execute command before loading. If a mailbox matches
   multiple folder-hook's, they are executed in the order given in the muttrc.

   Note: if you use the ``!'' shortcut for $spoolfile at the beginning of the
   pattern, you must place it inside of double or single quotes in order to
   distinguish it from the logical not operator for the expression.

   Note that the settings are not restored when you leave the mailbox. For
   example, a command action to perform is to change the sorting method based
   upon the mailbox being read:

folder-hook mutt set sort=threads

   However, the sorting method is not restored to its previous value when
   reading a different mailbox. To specify a default command, use the pattern
   ``.'':

folder-hook . set sort=date-sent

6. Keyboard macros

   Usage: macro menu key sequence [ description ]

   Macros are useful when you would like a single key to perform a series of
   actions. When you press key in menu menu, Mutt will behave as if you had
   typed sequence. So if you have a common sequence of commands you type, you
   can create a macro to execute those commands with a single key.

   menu  is  the  map which the macro will be bound. Multiple maps may be
   specified by separating multiple menu arguments by commas. Whitespace may
   not be used in between the menu arguments and the commas separating them.

   key and sequence are expanded by the same rules as the key bindings. There
   are some additions however. The first is that control characters in sequence
   can also be specified as ^x. In order to get a caret (`^'') you need to use
   ^^. Secondly, to specify a certain key such as up or to invoke a function
   directly, you can use the format <key name> and <function name>. For a
   listing of key names see the section on key bindings. Functions are listed
   in the reference.

   The advantage with using function names directly is that the macros will
   work regardless of the current key bindings, so they are not dependent on
   the user having particular key definitions. This makes them more robust and
   portable, and also facilitates defining of macros in files used by more than
   one user (e.g., the system Muttrc).

   Optionally you can specify a descriptive text after sequence, which is shown
   in the help screens.

   Note: Macro definitions (if any) listed in the help screen(s), are silently
   truncated at the screen width, and are not wrapped.

7. Using color and mono video attributes

   Usage: color object foreground background [ regexp ]
   Usage: color index foreground background pattern
   Usage: uncolor index pattern [ pattern ...  ]

   If your terminal supports color, you can spice up Mutt by creating your own
   color scheme. To define the color of an object (type of information), you
   must specify both a foreground color and a background color (it is not
   possible to only specify one or the other).

   object can be one of:

     * attachment
     * body (match regexp in the body of messages)
     * bold (hiliting bold patterns in the body of messages)
     * error (error messages printed by Mutt)
     * header (match regexp in the message header)
     * hdrdefault (default color of the message header in the pager)
     * index (match pattern in the message index)
     * indicator (arrow or bar used to indicate the current item in a menu)
     * markers (the ``+'' markers at the beginning of wrapped lines in the
       pager)
     * message (informational messages)
     * normal
     * quoted (text matching $quote_regexp in the body of a message)
     * quoted1, quoted2, ..., quotedN (higher levels of quoting)
     * search (hiliting of words in the pager)
     * signature
     * status (mode lines used to display info about the mailbox or message)
     * tilde (the ``˜'' used to pad blank lines in the pager)
     * tree (thread tree drawn in the message index and attachment menu)
     * underline (hiliting underlined patterns in the body of messages)

   foreground and background can be one of the following:

     * white
     * black
     * green
     * magenta
     * blue
     * cyan
     * yellow
     * red
     * default
     * colorx

   foreground can optionally be prefixed with the keyword bright to make the
   foreground color boldfaced (e.g., brightred).

   If your terminal supports it, the special keyword default can be used as a
   transparent color. The value brightdefault is also valid. If Mutt is linked
   against the S-Lang library, you also need to set the COLORFGBG environment
   variable  to the default colors of your terminal for this to work; for
   example (for Bourne-like shells):

set COLORFGBG="green;black"
export COLORFGBG

   Note:  The  S-Lang library requires you to use the lightgray and brown
   keywords instead of white and yellow when setting this variable.

   Note:  The uncolor command can be applied to the index object only. It
   removes entries from the list. You must specify the same pattern specified
   in the color command for it to be removed. The pattern ``*'' is a special
   token which means to clear the color index list of all entries.

   Mutt also recognizes the keywords color0, color1, …, colorN-1 (N being the
   number of colors supported by your terminal). This is useful when you remap
   the colors for your display (for example by changing the color associated
   with color2 for your xterm), since color names may then lose their normal
   meaning.

   If your terminal does not support color, it is still possible change the
   video attributes through the use of the ``mono'' command:

   Usage: mono <object> <attribute> [ regexp ]
   Usage: mono index attribute pattern
   Usage: unmono index pattern [ pattern ...  ]

   where attribute is one of the following:

     * none
     * bold
     * underline
     * reverse
     * standout

8. Ignoring (weeding) unwanted message headers

   Usage: [un]ignore pattern [ pattern ... ]

   Messages  often  have many header fields added by automatic processing
   systems, or which may not seem useful to display on the screen. This command
   allows you to specify header fields which you don't normally want to see.

   You do not need to specify the full header field name. For example, ``ignore
   content-''  will  ignore all header fields that begin with the pattern
   ``content-''. ``ignore *'' will ignore all headers.

   To remove a previously added token from the list, use the ``unignore''
   command. The ``unignore'' command will make Mutt display headers with the
   given  pattern. For example, if you do ``ignore x-'' it is possible to
   ``unignore x-mailer''.

   ``unignore *'' will remove all tokens from the ignore list.

   For example:
# Sven's draconian header weeding
ignore *
unignore from date subject to cc
unignore organization organisation x-mailer: x-newsreader: x-mailing-list:
unignore posted-to:

9. Alternative addresses

   Usage: [un]alternates regexp [ regexp ... ]

   With various functions, mutt will treat messages differently, depending on
   whether you sent them or whether you received them from someone else. For
   instance, when replying to a message that you sent to a different party,
   mutt  will  automatically suggest to send the response to the original
   message's recipients -- responding to yourself won't make much sense in many
   cases. (See $reply_to.)

   Many users receive e-mail under a number of different addresses. To fully
   use mutt's features here, the program must be able to recognize what e-mail
   addresses you receive mail under. That's the purpose of the alternates
   command: It takes a list of regular expressions, each of which can identify
   an address under which you receive e-mail.

   The unalternates command can be used to write exceptions to alternates
   patterns. If an address matches something in an alternates command, but you
   nonetheless do not think it is from you, you can list a more precise pattern
   under an unalternates command.

   To  remove  a  regular  expression  from  the alternates list, use the
   unalternates command with exactly the same regexp. Likewise, if the regexp
   for a alternates command matches an entry on the unalternates list, that
   unalternates entry will be removed. If the regexp for unalternates is ``*'',
   all entries on alternates will be removed.

10. Mailing lists

   Usage: [un]lists regexp [ regexp ... ]
   Usage: [un]subscribe regexp [ regexp ... ]

   Mutt has a few nice features for handling mailing lists. In order to take
   advantage of them, you must specify which addresses belong to mailing lists,
   and which mailing lists you are subscribed to. Once you have done this, the
   list-reply function will work for all known lists. Additionally, when you
   send a message to a subscribed list, mutt will add a Mail-Followup-To header
   to tell other users' mail user agents not to send copies of replies to your
   personal address. Note that the Mail-Followup-To header is a non-standard
   extension which is not supported by all mail user agents. Adding it is not
   bullet-proof against receiving personal CCs of list messages. Also note that
   the  generation  of  the  Mail-Followup-To header is controlled by the
   $followup_to configuration variable.

   More precisely, Mutt maintains lists of patterns for the addresses of known
   and subscribed mailing lists. Every subscribed mailing list is known. To
   mark a mailing list as known, use the ``lists'' command. To mark it as
   subscribed, use ``subscribe''.

   You can use regular expressions with both commands. To mark all messages
   sent to a specific bug report's address on mutt's bug tracking system as
   list mail, for instance, you could say ``subscribe [0-9]*@bugs.guug.de''.
   Often, it's sufficient to just give a portion of the list's e-mail address.

   Specify as much of the address as you need to to remove ambiguity. For
   example, if you've subscribed to the Mutt mailing list, you will receive
   mail addressed to mutt-users@mutt.org. So, to tell Mutt that this is a
   mailing list, you could add ``lists mutt-users@'' to your initialization
   file.  To  tell  mutt  that  you are subscribed to it, add ``subscribe
   mutt-users'' to your initialization file instead. If you also happen to get
   mail from someone whose address is mutt-users@example.com, you could use
   ``lists ^mutt-users@mutt\\.org$'' or ``subscribe ^mutt-users@mutt\\.org$''
   to match only mail from the actual list.

   The ``unlists'' command is used to remove a token from the list of known and
   subscribed mailing-lists. Use ``unlists *'' to remove all tokens.

   To remove a mailing list from the list of subscribed mailing lists, but keep
   it on the list of known mailing lists, use ``unsubscribe''.

11. Using Multiple spool mailboxes

   Usage: mbox-hook [!]pattern mailbox

   This command is used to move read messages from a specified mailbox to a
   different mailbox automatically when you quit or change folders. pattern is
   a regular expression specifying the mailbox to treat as a ``spool'' mailbox
   and mailbox specifies where mail should be saved when read.

   Unlike some of the other hook commands, only the first matching pattern is
   used (it is not possible to save read mail in more than a single mailbox).

12. Defining mailboxes which receive mail

   Usage: [un]mailboxes [!]filename [ filename ... ]

   This command specifies folders which can receive mail and which will be
   checked for new messages. By default, the main menu status bar displays how
   many of these folders have new messages.

   When changing folders, pressing space will cycle through folders with new
   mail.

   Pressing TAB in the directory browser will bring up a menu showing the files
   specified by the mailboxes command, and indicate which contain new messages.
   Mutt will automatically enter this mode when invoked from the command line
   with the -y option.

   The ``unmailboxes'' command is used to remove a token from the list of
   folders which receive mail. Use ``unmailboxes *'' to remove all tokens.

   Note: new mail is detected by comparing the last modification time to the
   last access time. Utilities like biff or frm or any other program which
   accesses the mailbox might cause Mutt to never detect new mail for that
   mailbox if they do not properly reset the access time. Backup tools are
   another common reason for updated access times.

   Note: the filenames in the mailboxes command are resolved when the command
   is executed, so if these names contain shortcut characters (such as ``=''
   and ``!''), any variable definition that affect these characters (like
   $folder and $spoolfile) should be executed before the mailboxes command.

13. User defined headers

   Usage: my_hdr string unmy_hdr field [ field ... ]

   The ``my_hdr'' command allows you to create your own header fields which
   will be added to every message you send.

   For example, if you would like to add an ``Organization:'' header field to
   all of your outgoing messages, you can put the command

   “my_hdr Organization: A Really Big Company, Anytown, USA”

   in your .muttrc.

   Note: space characters are not allowed between the keyword and the colon
   (``:'').  The standard for electronic mail (RFC822) says that space is
   illegal there, so Mutt enforces the rule.

   If you would like to add a header field to a single message, you should
   either set the $edit_headers variable, or use the edit-headers function
   (default: ``E'') in the send-menu so that you can edit the header of your
   message along with the body.

   To remove user defined header fields, use the ``unmy_hdr'' command. You may
   specify an asterisk (``*'') to remove all header fields, or the fields to
   remove. For example, to remove all ``To'' and ``Cc'' header fields, you
   could use:

   “unmy_hdr to cc”

14. Defining the order of headers when viewing messages

   Usage: hdr_order header1 header2 header3

   With this command, you can specify an order in which mutt will attempt to
   present headers to you when viewing messages.

   ``unhdr_order *'' will clear all previous headers from the order list, thus
   removing the header order effects set by the system-wide startup file.

hdr_order From Date: From: To: Cc: Subject:

15. Specify default save filename

   Usage: save-hook [!]pattern filename

   This command is used to override the default filename used when saving
   messages. filename will be used as the default filename if the message is
   From: an address matching regexp or if you are the author and the message is
   addressed to: something matching regexp.

   See  Message  Matching in Hooks for information on the exact format of
   pattern.

   Examples:

save-hook me@(turing\\.)?cs\\.hmc\\.edu$ +elkins
save-hook aol\\.com$ +spam

   Also see the fcc-save-hook command.

16. Specify default Fcc: mailbox when composing

   Usage: fcc-hook [!]pattern mailbox

   This command is used to save outgoing mail in a mailbox other than $record.
   Mutt searches the initial list of message recipients for the first matching
   regexp and uses mailbox as the default Fcc: mailbox. If no match is found
   the message will be saved to $record mailbox.

   See  Message  Matching in Hooks for information on the exact format of
   pattern.

   Example: fcc-hook [@.]aol\\.com$ +spammers

   The above will save a copy of all messages going to the aol.com domain to
   the `+spammers' mailbox by default. Also see the fcc-save-hook command.

17. Specify default save filename and default Fcc: mailbox at once

   Usage: fcc-save-hook [!]pattern mailbox

   This  command is a shortcut, equivalent to doing both a fcc-hook and a
   save-hook with its arguments.

18. Change settings based upon message recipients

   Usage: reply-hook [!]pattern command
   Usage: send-hook [!]pattern command
   Usage: send2-hook [!]pattern command

   These commands can be used to execute arbitrary configuration commands based
   upon recipients of the message. pattern is a regular expression matching the
   desired address. command is executed when regexp matches recipients of the
   message.

   reply-hook is matched against the message you are replying to, instead of
   the message you are sending. send-hook is matched against all messages, both
   new  and  replies. Note: reply-hooks are matched before the send-hook,
   regardless of the order specified in the user's configuration file.

   send2-hook is matched every time a message is changed, either by editing it,
   or by using the compose menu to change its recipients or subject. send2-hook
   is executed after send-hook, and can, e.g., be used to set parameters such
   as the $sendmail variable depending on the message's sender address.

   For each type of send-hook or reply-hook, when multiple matches occur,
   commands are executed in the order they are specified in the muttrc (for
   that type of hook).

   See  Message  Matching in Hooks for information on the exact format of
   pattern.

   Example: send-hook mutt "set mime_forward signature=''"

   Another  typical  use  for this command is to change the values of the
   $attribution,  $signature and $locale variables in order to change the
   language of the attributions and signatures based upon the recipients.

   Note: the send-hook's are only executed ONCE after getting the initial list
   of recipients. Adding a recipient after replying or editing the message will
   NOT cause any send-hook to be executed. Also note that my_hdr commands which
   modify recipient headers, or the message's subject, don't have any effect on
   the current message when executed from a send-hook.

19. Change settings before formatting a message

   Usage: message-hook [!]pattern command

   This command can be used to execute arbitrary configuration commands before
   viewing or formatting a message based upon information about the message.
   command is executed if the pattern matches the message to be displayed. When
   multiple  matches  occur,  commands are executed in the order they are
   specified in the muttrc.

   See  Message  Matching in Hooks for information on the exact format of
   pattern.

   Example:
message-hook ~A 'set pager=builtin'
message-hook '~f freshmeat-news' 'set pager="less \"+/^  subject: .*\""'

20. Choosing the cryptographic key of the recipient

   Usage: crypt-hook pattern keyid

   When encrypting messages with PGP or OpenSSL, you may want to associate a
   certain key with a given e-mail address automatically, either because the
   recipient's public key can't be deduced from the destination address, or
   because, for some reasons, you need to override the key Mutt would normally
   use. The crypt-hook command provides a method by which you can specify the
   ID  of the public key to be used when encrypting messages to a certain
   recipient.

   The meaning of "key id" is to be taken broadly in this context: You can
   either put a numerical key ID here, an e-mail address, or even just a real
   name.

21. Adding key sequences to the keyboard buffer

   Usage: push string

   This command adds the named string to the keyboard buffer. The string may
   contain control characters, key names and function names like the sequence
   string in the macro command. You may use it to automatically run a sequence
   of commands at startup, or when entering certain folders. For example, the
   following command will automatically collapse all threads when entering a
   folder:
folder-hook . 'push <collapse-all>'

22. Executing functions

   Usage: exec function [ function ... ]

   This command can be used to execute any function. Functions are listed in
   the  function  reference.  ``exec  function''  is equivalent to ``push
   <function>''.

23. Message Scoring

   Usage: score pattern value
   Usage: unscore pattern [ pattern ... ]

   The score commands adds value to a message's score if pattern matches it.
   pattern is a string in the format described in the patterns section (note:
   For efficiency reasons, patterns which scan information not available in the
   index,  such as ˜b, ˜B or ˜h, may not be used). value is a positive or
   negative integer. A message's final score is the sum total of all matching
   score entries. However, you may optionally prefix value with an equal sign
   (=) to cause evaluation to stop at a particular entry if there is a match.
   Negative final scores are rounded up to 0.

   The unscore command removes score entries from the list. You must specify
   the same pattern specified in the score command for it to be removed. The
   pattern ``*'' is a special token which means to clear the list of all score
   entries.

24. Spam detection

   Usage: spam pattern format
   Usage: nospam pattern

   Mutt has generalized support for external spam-scoring filters. By defining
   your spam patterns with the spam and nospam commands, you can limit, search,
   and  sort your mail based on its spam attributes, as determined by the
   external filter. You also can display the spam attributes in your index
   display using the %H selector in the $index_format variable. (Tip: try
   %?H?[%H] ? to display spam tags only when they are defined for a given
   message.)

   Your first step is to define your external filter's spam patterns using the
   spam command. pattern should be a regular expression that matches a header
   in  a mail message. If any message in the mailbox matches this regular
   expression, it will receive a ``spam tag'' or ``spam attribute'' (unless it
   also  matches  a  nospam pattern -- see below.) The appearance of this
   attribute is entirely up to you, and is governed by the format parameter.
   format can be any static text, but it also can include back-references from
   the pattern expression. (A regular expression ``back-reference'' refers to a
   sub-expression contained within parentheses.) %1 is replaced with the first
   back-reference in the regex, %2 with the second, etc.

   If you're using multiple spam filters, a message can have more than one
   spam-related header. You can define spam patterns for each filter you use.
   If a message matches two or more of these patterns, and the $spam_separator
   variable is set to a string, then the message's spam tag will consist of all
   the  format strings joined together, with the value of $spam_separator
   separating them.

   For example, suppose I use DCC, SpamAssassin, and PureMessage. I might
   define these spam settings:
spam "X-DCC-.*-Metrics:.*(....)=many"         "90+/DCC-%1"
spam "X-Spam-Status: Yes"                     "90+/SA"
spam "X-PerlMX-Spam: .*Probability=([0-9]+)%" "%1/PM"
set spam_separator=", "

   If I then received a message that DCC registered with ``many'' hits under
   the  ``Fuz2''  checksum,  and  that  PureMessage registered with a 97%
   probability of being spam, that message's spam tag would read 90+/DCC-Fuz2,
   97/PM. (The four characters before ``=many'' in a DCC report indicate the
   checksum used -- in this case, ``Fuz2''.)

   If the $spam_separator variable is unset, then each spam pattern match
   supersedes the previous one. Instead of getting joined format strings,
   you'll get only the last one to match.

   The spam tag is what will be displayed in the index when you use %H in the
   $index_format variable. It's also the string that the ˜H pattern-matching
   expression matches against for search and limit functions. And it's what
   sorting by spam attribute will use as a sort key.

   That's a pretty complicated example, and most people's actual environments
   will have only one spam filter. The simpler your configuration, the more
   effective mutt can be, especially when it comes to sorting.

   Generally, when you sort by spam tag, mutt will sort lexically -- that is,
   by ordering strings alphanumerically. However, if a spam tag begins with a
   number,  mutt will sort numerically first, and lexically only when two
   numbers are equal in value. (This is like UNIX's sort -n.) A message with no
   spam attributes at all -- that is, one that didn't match any of your spam
   patterns -- is sorted at lowest priority. Numbers are sorted next, beginning
   with 0 and ranging upward. Finally, non-numeric strings are sorted, with
   ``a'' taking lower priority than ``z''. Clearly, in general, sorting by spam
   tags is most effective when you can coerce your filter to give you a raw
   number. But in case you can't, mutt can still do something useful.

   The nospam command can be used to write exceptions to spam patterns. If a
   header pattern matches something in a spam command, but you nonetheless do
   not want it to receive a spam tag, you can list a more precise pattern under
   a nospam command.

   If the pattern given to nospam is exactly the same as the pattern on an
   existing spam list entry, the effect will be to remove the entry from the
   spam list, instead of adding an exception. Likewise, if the pattern for a
   spam command matches an entry on the nospam list, that nospam entry will be
   removed. If the pattern for nospam is ``*'', all entries on both lists will
   be removed. This might be the default action if you use spam and nospam in
   conjunction with a folder-hook.

   You can have as many spam or nospam commands as you like. You can even do
   your  own  primitive spam detection within mutt -- for example, if you
   consider all mail from MAILER-DAEMON to be spam, you can use a spam command
   like this:

spam "^From: .*MAILER-DAEMON"       "999"

25. Setting and Querying Variables

25.1. Commands

   The following commands are available to manipulate and query variables:

   Usage: set [no|inv]variable[=value] [ variable ... ]
   Usage: toggle variable [variable ... ]
   Usage: unset variable [variable ... ]
   Usage: reset variable [variable ... ]

   This command is used to set (and unset) configuration variables. There are
   four basic types of variables: boolean, number, string and quadoption.
   boolean variables can be set (true) or unset (false). number variables can
   be assigned a positive integer value.

   string variables consist of any number of printable characters. strings must
   be enclosed in quotes if they contain spaces or tabs. You may also use the
   ``C'' escape sequences \n and \t for newline and tab, respectively.

   quadoption variables are used to control whether or not to be prompted for
   certain actions, or to specify a default action. A value of yes will cause
   the action to be carried out automatically as if you had answered yes to the
   question. Similarly, a value of no will cause the action to be carried out
   as if you had answered ``no.'' A value of ask-yes will cause a prompt with a
   default  answer of ``yes'' and ask-no will provide a default answer of
   ``no.''

   Prefixing a variable with ``no'' will unset it. Example: set noaskbcc.

   For boolean variables, you may optionally prefix the variable name with inv
   to  toggle  the value (on or off). This is useful when writing macros.
   Example: set invsmart_wrap.

   The toggle command automatically prepends the inv prefix to all specified
   variables.

   The unset command automatically prepends the no prefix to all specified
   variables.

   Using the enter-command function in the index menu, you can query the value
   of a variable by prefixing the name of the variable with a question mark:

set ?allow_8bit

   The question mark is actually only required for boolean and quadoption
   variables.

   The reset command resets all given variables to the compile time defaults
   (hopefully mentioned in this manual). If you use the command set and prefix
   the variable with ``&'' this has the same behavior as the reset command.

   With the reset command there exists the special variable ``all'', which
   allows you to reset all variables to their system defaults.

25.2. User-defined variables

25.2.1. Introduction

   Along with the variables listed in the Configuration variables section, mutt
   supports user-defined variables with names starting with my_ as in, for
   example, my_cfgdir.

   The set command creates a custom $my_ variable and changes its value. The
   unset and reset commands remove the variable entirely.

   Since user-defined variables are expanded in the same way that environment
   variables are (except for the shell-escape command), this feature can be
   used to make configuration files more readable.

25.2.2. Examples

   The following example defines and uses the variable my_cfgdir to abbreviate
   the calls of the source command:

set my_cfgdir = $HOME/mutt/config

source $my_cfgdir/hooks
source $my_cfgdir/macros
# more source commands...

   A custom variable can also be used in macros to backup the current value of
   another variable. In the following example, the value of the $delete is
   changed temporarily while its original value is saved as my_delete. After
   the  macro has executed all commands, the original value of $delete is
   restored.

macro pager ,x '\
<enter-command>set my_delete=$delete<enter>\
<enter-command>set delete=yes<enter>\
...\
<enter-command>set delete=$my_delete<enter>'

   Since  mutt expands such values already when parsing the configuration
   file(s), the value of $my_delete in the last example would be the value of
   $delete exactly as it was at that point during parsing the configuration
   file. If another statement would change the value for $delete later in the
   same or another file, it would have no effect on $my_delete. However, the
   expansion can be deferred to runtime, as shown in the next example, when
   escaping the dollar sign.

macro pager <PageDown> "\
<enter-command> set my_old_pager_stop=\$pager_stop pager_stop<Enter>\
<next-page>\
<enter-command> set pager_stop=\$my_old_pager_stop<Enter>\
<enter-command> unset my_old_pager_stop<Enter>"

   Note that there is a space between <enter-command> and the set configuration
   command,  preventing mutt from recording the macro's commands into its
   history.

26. Reading initialization commands from another file

   Usage: source filename

   This command allows the inclusion of initialization commands from other
   files. For example, I place all of my aliases in ˜/.mail_aliases so that I
   can make my ˜/.muttrc readable and keep my aliases private.

   If the filename begins with a tilde (``˜''), it will be expanded to the path
   of your home directory.

   If the filename ends with a vertical bar (|), then filename is considered to
   be  an  executable  program  from  which  to  read  input  (eg. source
   ˜/bin/myscript|).

27. Removing hooks

   Usage: unhook [ * | hook-type ]

   This command permits you to flush hooks you have previously defined. You can
   either remove all hooks by giving the ``*'' character as an argument, or you
   can remove all hooks of a specific type by saying something like unhook
   send-hook.

Chapter 4. Advanced Usage

   Table of Contents

   1. Regular Expressions
   2. Patterns

        2.1. Pattern Modifier
        2.2. Complex Patterns
        2.3. Searching by Date

   3. Using Tags
   4. Using Hooks

        4.1. Message Matching in Hooks

   5. External Address Queries
   6. Mailbox Formats
   7. Mailbox Shortcuts
   8. Handling Mailing Lists
   9. Editing threads

        9.1. Linking threads
        9.2. Breaking threads

   10. Delivery Status Notification (DSN) Support
   11. POP3 Support (OPTIONAL)
   12. IMAP Support (OPTIONAL)

        12.1. The Folder Browser
        12.2. Authentication

   13. Managing multiple IMAP/POP accounts (OPTIONAL)
   14. Start a WWW Browser on URLs (EXTERNAL)
   15. Local caching (OPTIONAL)

        15.1. Header caching
        15.2. Body caching

1. Regular Expressions

   All string patterns in Mutt including those in more complex patterns must be
   specified using regular expressions (regexp) in the ``POSIX extended''
   syntax (which is more or less the syntax used by egrep and GNU awk). For
   your convenience, we have included below a brief description of this syntax.

   The search is case sensitive if the pattern contains at least one upper case
   letter, and case insensitive otherwise. Note that ``\'' must be quoted if
   used for a regular expression in an initialization command: ``\\''.

   A regular expression is a pattern that describes a set of strings. Regular
   expressions are constructed analogously to arithmetic expressions, by using
   various operators to combine smaller expressions.

   Note that the regular expression can be enclosed/delimited by either " or '
   which is useful if the regular expression includes a white-space character.
   See Syntax of Initialization Files for more information on " and ' delimiter
   processing.  To  match  a  literal  "  or ' you must preface it with \
   (backslash).

   The fundamental building blocks are the regular expressions that match a
   single character. Most characters, including all letters and digits, are
   regular expressions that match themselves. Any metacharacter with special
   meaning may be quoted by preceding it with a backslash.

   The period ``.'' matches any single character. The caret ``^'' and the
   dollar sign ``$'' are metacharacters that respectively match the empty
   string at the beginning and end of a line.

   A  list  of  characters enclosed by ``['' and ``]'' matches any single
   character in that list; if the first character of the list is a caret ``^''
   then it matches any character not in the list. For example, the regular
   expression  [0123456789]  matches  any  single digit. A range of ASCII
   characters  may  be specified by giving the first and last characters,
   separated by a hyphen ``-''. Most metacharacters lose their special meaning
   inside  lists.  To include a literal ``]'' place it first in the list.
   Similarly, to include a literal ``^'' place it anywhere but first. Finally,
   to include a literal hyphen ``-'' place it last.

   Certain  named classes of characters are predefined. Character classes
   consist of ``[:'', a keyword denoting the class, and ``:]''. The following
   classes are defined by the POSIX standard:

   [:alnum:]
          Alphanumeric characters.

   [:alpha:]
          Alphabetic characters.

   [:blank:]
          Space or tab characters.

   [:cntrl:]
          Control characters.

   [:digit:]
          Numeric characters.

   [:graph:]
          Characters  that  are  both  printable and visible. (A space is
          printable, but not visible, while an ``a'' is both.)

   [:lower:]
          Lower-case alphabetic characters.

   [:print:]
          Printable characters (characters that are not control characters.)

   [:punct:]
          Punctuation characters (characters that are not letter, digits,
          control characters, or space characters).

   [:space:]
          Space characters (such as space, tab and formfeed, to name a few).

   [:upper:]
          Upper-case alphabetic characters.

   [:xdigit:]
          Characters that are hexadecimal digits.

   A character class is only valid in a regular expression inside the brackets
   of a character list. Note that the brackets in these class names are part of
   the  symbolic  names, and must be included in addition to the brackets
   delimiting the bracket list. For example, [[:digit:]] is equivalent to
   [0-9].

   Two additional special sequences can appear in character lists. These apply
   to non-ASCII character sets, which can have single symbols (called collating
   elements) that are represented with more than one character, as well as
   several characters that are equivalent for collating or sorting purposes:

   Collating Symbols
          A collating symbol is a multi-character collating element enclosed in
          ``[.'' and ``.]''. For example, if ``ch'' is a collating element,
          then [[.ch.]] is a regexp that matches this collating element, while
          [ch] is a regexp that matches either ``c'' or ``h''.

   Equivalence Classes
          An  equivalence  class  is a locale-specific name for a list of
          characters that are equivalent. The name is enclosed in ``[='' and
          ``=]''. For example, the name ``e'' might be used to represent all of
          ``è'' ``é'' and ``e''. In this case, [[=e=]] is a regexp that matches
          any of ``è'', ``é'' and ``e''.

   A regular expression matching a single character may be followed by one of
   several repetition operators:

   ?
          The preceding item is optional and matched at most once.

   *
          The preceding item will be matched zero or more times.

   +
          The preceding item will be matched one or more times.

   {n}
          The preceding item is matched exactly n times.

   {n,}
          The preceding item is matched n or more times.

   {,m}
          The preceding item is matched at most m times.

   {n,m}
          The preceding item is matched at least n times, but no more than m
          times.

   Two  regular  expressions  may  be concatenated; the resulting regular
   expression matches any string formed by concatenating two substrings that
   respectively match the concatenated subexpressions.

   Two regular expressions may be joined by the infix operator ``|''; the
   resulting  regular  expression  matches  any  string  matching  either
   subexpression.

   Repetition  takes  precedence  over concatenation, which in turn takes
   precedence  over alternation. A whole subexpression may be enclosed in
   parentheses to override these precedence rules.

   Note: If you compile Mutt with the GNU rx package, the following operators
   may also be used in regular expressions:

   \\y
          Matches the empty string at either the beginning or the end of a
          word.

   \\B
          Matches the empty string within a word.

   \\<
          Matches the empty string at the beginning of a word.

   \\>
          Matches the empty string at the end of a word.

   \\w
          Matches  any  word-constituent  character  (letter,  digit,  or
          underscore).

   \\W
          Matches any character that is not word-constituent.

   \\`
          Matches the empty string at the beginning of a buffer (string).

   \\'
          Matches the empty string at the end of a buffer.

   Please note however that these operators are not defined by POSIX, so they
   may or may not be available in stock libraries on various systems.

2. Patterns

   Many of Mutt's commands allow you to specify a pattern to match (limit,
   tag-pattern,  delete-pattern,  etc.). There are several ways to select
   messages:

   Table 4.1. Pattern modifiers
   Pattern modifier Description
   ~A all messages
   ~b EXPR messages which contain EXPR in the message body
   ~B EXPR messages which contain EXPR in the whole message
   ~c EXPR messages carbon-copied to EXPR
   ~C EXPR message is either to: or cc: EXPR
   ~d [MIN]-[MAX] messages with ``date-sent'' in a Date range
   ~D deleted messages
   ~e EXPR message which contains EXPR in the ``Sender'' field
   ~E expired messages
   ~F flagged messages
   ~f EXPR messages originating from EXPR
   ~g cryptographically signed messages
   ~G cryptographically encrypted messages
   ~h EXPR messages which contain EXPR in the message header
   ~H EXPR messages with a spam attribute matching EXPR
   ~i EXPR message which match EXPR in the ``Message-ID'' field
   ~k message contains PGP key material
   ~L EXPR message is either originated or received by EXPR
   ~l message is addressed to a known mailing list
   ~m [MIN]-[MAX] message in the range MIN to MAX *)
   ~n [MIN]-[MAX] messages with a score in the range MIN to MAX *)
   ~N new messages
   ~O old messages
   ~p message is addressed to you (consults alternates)
   ~P message is from you (consults alternates)
   ~Q messages which have been replied to
   ~r [MIN]-[MAX] messages with ``date-received'' in a Date range
   ~R read messages
   ~s EXPR messages having EXPR in the ``Subject'' field.
   ~S superseded messages
   ~t EXPR messages addressed to EXPR
   ~T tagged messages
   ~u message is addressed to a subscribed mailing list
   ~U unread messages
   ~v message is part of a collapsed thread.
   ~V cryptographically verified messages
   ~x EXPR messages which contain EXPR in the `References' field
   ~X [MIN]-[MAX] messages with MIN to MAX attachments *)
   ~y EXPR messages which contain EXPR in the `X-Label' field
   ~z [MIN]-[MAX] messages with a size in the range MIN to MAX *)
   ~= duplicated messages (see $duplicate_threads)
   ~$ unreferenced messages (requires threaded view)
   ~(PATTERN) messages in threads containing messages matching a certain
   pattern, e.g. all threads containing messages from you: ~(~P)

   Where EXPR is a regular expression. Special attention has to be made when
   using regular expressions inside of patterns. Specifically, Mutt's parser
   for these patterns will strip one level of backslash (\), which is normally
   used for quoting. If it is your intention to use a backslash in the regular
   expression, you will need to use two backslashes instead (\\). You can force
   mutt to treat EXPR as a simple string instead of a regular expression by
   using = instead of ˜ in the pattern name. For example, =b *.* will find all
   messages that contain the literal string '*.*'. Simple string matches are
   less powerful than regular expressions but can be considerably faster. This
   is especially true for IMAP folders, because string matches can be performed
   on  the  server  instead  of by fetching every message. IMAP treats =h
   specially: it must be of the form "header: substring" and will not partially
   match header names. The substring part may be omitted if you simply wish to
   find messages containing a particular header without regard to its value.

   *) The forms <[MAX], >[MIN], [MIN]- and -[MAX] are allowed, too.

2.1. Pattern Modifier

   Note that patterns matching 'lists' of addresses (notably c,C,p,P and t)
   match if there is at least one match in the whole list. If you want to make
   sure that all elements of that list match, you need to prefix your pattern
   with  ^. This example matches all mails which only has recipients from
   Germany.

^~C \.de$

2.2. Complex Patterns

   Logical AND is performed by specifying more than one criterion. For example:

~t mutt ~f elkins

   would  select  messages which contain the word ``mutt'' in the list of
   recipients and that have the word ``elkins'' in the ``From'' header field.

   Mutt also recognizes the following operators to create more complex search
   patterns:

     * ! -- logical NOT operator
     * | -- logical OR operator
     * () -- logical grouping operator

   Here is an example illustrating a complex search pattern. This pattern will
   select all messages which do not contain ``mutt'' in the ``To'' or ``Cc''
   field and which are from ``elkins''.

!(~t mutt|~c mutt) ~f elkins

   Here is an example using white space in the regular expression (note the '
   and " delimiters). For this to match, the mail's subject must match the
   ``^Junk +From +Me$'' and it must be from either ``Jim +Somebody'' or ``Ed
   +SomeoneElse'':

 '~s "^Junk +From +Me$" ~f ("Jim +Somebody"|"Ed +SomeoneElse")'

   Note that if a regular expression contains parenthesis, or a vertical bar
   ("|"), you must enclose the expression in double or single quotes since
   those characters are also used to separate different parts of Mutt's pattern
   language. For example,

~f "me@(mutt\.org|cs\.hmc\.edu)"

   Without the quotes, the parenthesis wouldn't end. This would be seperated to
   two OR'd patterns: ˜f me@(mutt\.org and cs\.hmc\.edu). They are never what
   you want.

2.3. Searching by Date

   Mutt supports two types of dates, absolute and relative.

   Absolute. Dates must be in DD/MM/YY format (month and year are optional,
   defaulting to the current month and year). An example of a valid range of
   dates is:

Limit to messages matching: ~d 20/1/95-31/10

   If you omit the minimum (first) date, and just specify ``-DD/MM/YY'', all
   messages before the given date will be selected. If you omit the maximum
   (second) date, and specify ``DD/MM/YY-'', all messages after the given date
   will be selected. If you specify a single date with no dash (``-''), only
   messages sent on the given date will be selected.

   Error Margins. You can add error margins to absolute dates. An error margin
   is a sign (+ or -), followed by a digit, followed by one of the following
   units:
y        years
m        months
w        weeks
d        days

   As a special case, you can replace the sign by a ``*'' character, which is
   equivalent to giving identical plus and minus error margins.

   Example: To select any messages two weeks around January 15, 2001, you'd use
   the following pattern:

Limit to messages matching: ~d 15/1/2001*2w

   Relative. This type of date is relative to the current date, and may be
   specified as:
     * >offset (messages older than offset units)
     * <offset (messages newer than offset units)
     * =offset (messages exactly offset units old)

   offset is specified as a positive number with one of the following units:
y       years
m       months
w       weeks
d       days

   Example: to select messages less than 1 month old, you would use
Limit to messages matching: ~d <1m

   Note: all dates used when searching are relative to the local time zone, so
   unless you change the setting of your $index_format to include a %[...]
   format, these are not the dates shown in the main index.

3. Using Tags

   Sometimes it is desirable to perform an operation on a group of messages all
   at once rather than one at a time. An example might be to save messages to a
   mailing list to a separate folder, or to delete all messages with a given
   subject.  To  tag all messages matching a pattern, use the tag-pattern
   function,  which is bound to ``shift-T'' by default. Or you can select
   individual messages by hand using the ``tag-message'' function, which is
   bound to ``t'' by default. See patterns for Mutt's pattern matching syntax.

   Once you have tagged the desired messages, you can use the ``tag-prefix''
   operator,  which  is  the  ``;''  (semicolon) key by default. When the
   ``tag-prefix'' operator is used, the next operation will be applied to all
   tagged  messages  if that operation can be used in that manner. If the
   $auto_tag variable is set, the next operation applies to the tagged messages
   automatically, without requiring the ``tag-prefix''.

   In macros or push commands, you can use the ``tag-prefix-cond'' operator. If
   there are no tagged messages, mutt will "eat" the rest of the macro to abort
   it's execution. Mutt will stop "eating" the macro when it encounters the
   ``end-cond'' operator; after this operator the rest of the macro will be
   executed as normal.

4. Using Hooks

   A hook is a concept borrowed from the EMACS editor which allows you to
   execute arbitrary commands before performing some operation. For example,
   you may wish to tailor your configuration based upon which mailbox you are
   reading, or to whom you are sending mail. In the Mutt world, a hook consists
   of  a  regular  expression  or  pattern  along  with  a  configuration
   option/command. See
     * folder-hook
     * send-hook
     * message-hook
     * save-hook
     * mbox-hook
     * fcc-hook
     * fcc-save-hook

   for specific details on each type of hook available.

   Note:  if  a hook changes configuration settings, these changes remain
   effective until the end of the current mutt session. As this is generally
   not desired, a default hook needs to be added before all other hooks to
   restore configuration defaults. Here is an example with send-hook and the
   my_hdr directive:

send-hook . 'unmy_hdr From:'
send-hook ~C'^b@b\.b$' my_hdr from: c@c.c

4.1. Message Matching in Hooks

   Hooks that act upon messages (send-hook, save-hook, fcc-hook, message-hook)
   are evaluated in a slightly different manner. For the other types of hooks,
   a regular expression is sufficient. But in dealing with messages a finer
   grain of control is needed for matching since for different purposes you
   want to match different criteria.

   Mutt allows the use of the search pattern language for matching messages in
   hook commands. This works in exactly the same way as it would when limiting
   or searching the mailbox, except that you are restricted to those operators
   which match information mutt extracts from the header of the message (i.e.,
   from, to, cc, date, subject, etc.).

   For example, if you wanted to set your return address based upon sending
   mail to a specific address, you could do something like:
send-hook '~t ^me@cs\.hmc\.edu$' 'my_hdr From: Mutt User <user@host>'

   which would execute the given command when sending mail to me@cs.hmc.edu.

   However, it is not required that you write the pattern to match using the
   full searching language. You can still specify a simple regular expression
   like the other hooks, in which case Mutt will translate your pattern into
   the full language, using the translation specified by the $default_hook
   variable. The pattern is translated at the time the hook is declared, so the
   value of $default_hook that is in effect at that time will be used.

5. External Address Queries

   Mutt supports connecting to external directory databases such as LDAP,
   ph/qi, bbdb, or NIS through a wrapper script which connects to mutt using a
   simple interface. Using the $query_command variable, you specify the wrapper
   command to use. For example:

set query_command = "mutt_ldap_query.pl '%s'"

   The wrapper script should accept the query on the command-line. It should
   return a one line message, then each matching response on a single line,
   each line containing a tab separated address then name then some other
   optional information. On error, or if there are no matching addresses,
   return a non-zero exit code and a one line error message.

   An example multiple response output:
Searching database ... 20 entries ... 3 matching:
me@cs.hmc.edu           Michael Elkins  mutt dude
blong@fiction.net       Brandon Long    mutt and more
roessler@guug.de        Thomas Roessler mutt pgp

   There are two mechanisms for accessing the query function of mutt. One is to
   do a query from the index menu using the query function (default: Q). This
   will prompt for a query, then bring up the query menu which will list the
   matching responses. From the query menu, you can select addresses to create
   aliases, or to mail. You can tag multiple addresses to mail, start a new
   query, or have a new query appended to the current responses.

   The  other  mechanism  for accessing the query function is for address
   completion, similar to the alias completion. In any prompt for address
   entry, you can use the complete-query function (default: ^T) to run a query
   based on the current address you have typed. Like aliases, mutt will look
   for what you have typed back to the last space or comma. If there is a
   single response for that query, mutt will expand the address in place. If
   there are multiple responses, mutt will activate the query menu. At the
   query menu, you can select one or more addresses to be added to the prompt.

6. Mailbox Formats

   Mutt supports reading and writing of four different mailbox formats: mbox,
   MMDF, MH and Maildir. The mailbox type is autodetected, so there is no need
   to use a flag for different mailbox types. When creating new mailboxes, Mutt
   uses the default specified with the $mbox_type variable.

   mbox. This is the most widely used mailbox format for UNIX. All messages are
   stored in a single file. Each message has a line of the form:

From me@cs.hmc.edu Fri, 11 Apr 1997 11:44:56 PST

   to denote the start of a new message (this is often referred to as the
   ``From_'' line).

   MMDF. This is a variant of the mbox format. Each message is surrounded by
   lines containing ``^A^A^A^A'' (four control-A's).

   MH.  A  radical  departure from mbox and MMDF, a mailbox consists of a
   directory  and each message is stored in a separate file. The filename
   indicates the message number (however, this is may not correspond to the
   message number Mutt displays). Deleted messages are renamed with a comma (,)
   prepended  to the filename. Note: Mutt detects this type of mailbox by
   looking for either .mh_sequences or .xmhcache (needed to distinguish normal
   directories from MH mailboxes).

   Maildir.  The  newest of the mailbox formats, used by the Qmail MTA (a
   replacement  for  sendmail).  Similar to MH, except that it adds three
   subdirectories of the mailbox: tmp, new and cur. Filenames for the messages
   are chosen in such a way they are unique, even when two programs are writing
   the mailbox over NFS, which means that no file locking is needed.

7. Mailbox Shortcuts

   There are a number of built in shortcuts which refer to specific mailboxes.
   These shortcuts can be used anywhere you are prompted for a file or mailbox
   path.

     * ! -- refers to your $spoolfile (incoming) mailbox
     * > -- refers to your $mbox file
     * < -- refers to your $record file
     * ^ -- refers to the current mailbox
     * - or !! -- refers to the file you've last visited
     * ˜ -- refers to your home directory
     * = or + -- refers to your $folder directory
     * @alias -- refers to the default save folder as determined by the address
       of the alias

8. Handling Mailing Lists

   Mutt has a few configuration options that make dealing with large amounts of
   mail easier. The first thing you must do is to let Mutt know what addresses
   you consider to be mailing lists (technically this does not have to be a
   mailing list, but that is what it is most often used for), and what lists
   you are subscribed to. This is accomplished through the use of the lists and
   subscribe commands in your muttrc.

   Now that Mutt knows what your mailing lists are, it can do several things,
   the first of which is the ability to show the name of a list through which
   you  received a message (i.e., of a subscribed list) in the index menu
   display. This is useful to distinguish between personal and list mail in the
   same mailbox. In the $index_format variable, the escape ``%L'' will return
   the string ``To <list>'' when ``list'' appears in the ``To'' field, and ``Cc
   <list>'' when it appears in the ``Cc'' field (otherwise it returns the name
   of the author).

   Often times the ``To'' and ``Cc'' fields in mailing list messages tend to
   get quite large. Most people do not bother to remove the author of the
   message they are reply to from the list, resulting in two or more copies
   being sent to that person. The ``list-reply'' function, which by default is
   bound to ``L'' in the index menu and pager, helps reduce the clutter by only
   replying to the known mailing list addresses instead of all recipients
   (except as specified by Mail-Followup-To, see below).

   Mutt also supports the Mail-Followup-To header. When you send a message to a
   list of recipients which includes one or several subscribed mailing lists,
   and if the $followup_to option is set, mutt will generate a Mail-Followup-To
   header which contains all the recipients to whom you send this message, but
   not your address. This indicates that group-replies or list-replies (also
   known as ``followups'') to this message should only be sent to the original
   recipients of the message, and not separately to you - you'll receive your
   copy through one of the mailing lists you are subscribed to.

   Conversely, when group-replying or list-replying to a message which has a
   Mail-Followup-To   header,  mutt  will  respect  this  header  if  the
   $honor_followup_to configuration variable is set. Using list-reply will in
   this case also make sure that the reply goes to the mailing list, even if
   it's not specified in the list of recipients in the Mail-Followup-To.

   Note that, when header editing is enabled, you can create a Mail-Followup-To
   header manually. Mutt will only auto-generate this header if it doesn't
   exist when you send the message.

   The other method some mailing list admins use is to generate a ``Reply-To''
   field which points back to the mailing list address rather than the author
   of the message. This can create problems when trying to reply directly to
   the author in private, since most mail clients will automatically reply to
   the  address  given in the ``Reply-To'' field. Mutt uses the $reply_to
   variable to help decide which address to use. If set to ask-yes or ask-no,
   you will be prompted as to whether or not you would like to use the address
   given in the ``Reply-To'' field, or reply directly to the address given in
   the ``From'' field. When set to yes, the ``Reply-To'' field will be used
   when present.

   The ``X-Label:'' header field can be used to further identify mailing lists
   or list subject matter (or just to annotate messages individually). The
   $index_format variable's ``%y'' and ``%Y'' escapes can be used to expand
   ``X-Label:'' fields in the index, and Mutt's pattern-matcher can match
   regular  expressions  to ``X-Label:'' fields with the ``˜y'' selector.
   ``X-Label:'' is not a standard message header field, but it can easily be
   inserted by procmail and other mail filtering agents.

   Lastly, Mutt has the ability to sort the mailbox into threads. A thread is a
   group of messages which all relate to the same subject. This is usually
   organized into a tree-like structure where a message and all of its replies
   are represented graphically. If you've ever used a threaded news client,
   this is the same concept. It makes dealing with large volume mailing lists
   easier because you can easily delete uninteresting threads and quickly find
   topics of value.

9. Editing threads

   Mutt has the ability to dynamically restructure threads that are broken
   either by misconfigured software or bad behavior from some correspondents.
   This allows to clean your mailboxes formats) from these annoyances which
   make it hard to follow a discussion.

9.1. Linking threads

   Some  mailers tend to "forget" to correctly set the "In-Reply-To:" and
   "References:" headers when replying to a message. This results in broken
   discussions because Mutt has not enough information to guess the correct
   threading. You can fix this by tagging the reply, then moving to the parent
   message and using the ``link-threads'' function (bound to & by default). The
   reply will then be connected to this "parent" message.

   You can also connect multiple children at once, tagging them and using the
   tag-prefix command (';') or the auto_tag option.

9.2. Breaking threads

   On  mailing  lists, some people are in the bad habit of starting a new
   discussion by hitting "reply" to any message from the list and changing the
   subject to a totally unrelated one. You can fix such threads by using the
   ``break-thread'' function (bound by default to #), which will turn the
   subthread starting from the current message into a whole different thread.

10. Delivery Status Notification (DSN) Support

   RFC1894 defines a set of MIME content types for relaying information about
   the status of electronic mail messages. These can be thought of as ``return
   receipts.'' Berkeley sendmail 8.8.x currently has some command line options
   in  which  the mail client can make requests as to what type of status
   messages should be returned.

   To support this, there are two variables. $dsn_notify is used to request
   receipts for different results (such as failed message, message delivered,
   etc.). $dsn_return requests how much of your message should be returned with
   the receipt (headers or full message). Refer to the man page on sendmail for
   more details on DSN.

11. POP3 Support (OPTIONAL)

   If Mutt was compiled with POP3 support (by running the configure script with
   the --enable-pop flag), it has the ability to work with mailboxes located on
   a remote POP3 server and fetch mail for local browsing.

   You  can  access  the  remote  POP3  mailbox  by  selecting the folder
   pop://popserver/.

   You can select an alternative port by specifying it with the server, ie:
   pop://popserver:port/.

   You   can  also  specify  different  username  for  each  folder,  ie:
   pop://username@popserver[:port]/.

   Polling for new mail is more expensive over POP3 than locally. For this
   reason the frequency at which Mutt will check for mail remotely can be
   controlled by the $pop_checkinterval variable, which defaults to every 60
   seconds.

   If Mutt was compiled with SSL support (by running the configure script with
   the --with-ssl flag), connections to POP3 servers can be encrypted. This
   naturally requires that the server supports SSL encrypted connections. To
   access  a  folder  with  POP3/SSL,  you  should  use pops: prefix, ie:
   pops://[username@]popserver[:port]/.

   Another way to access your POP3 mail is the fetch-mail function (default:
   G). It allows to connect to $pop_host, fetch all your new mail and place it
   in the local $spoolfile. After this point, Mutt runs exactly as if the mail
   had always been local.

   Note: If you only need to fetch all messages to local mailbox you should
   consider using a specialized program, such as fetchmail

12. IMAP Support (OPTIONAL)

   If Mutt was compiled with IMAP support (by running the configure script with
   the --enable-imap flag), it has the ability to work with folders located on
   a remote IMAP server.

   You   can   access   the   remote   inbox   by  selecting  the  folder
   imap://imapserver/INBOX, where imapserver is the name of the IMAP server and
   INBOX is the special name for your spool mailbox on the IMAP server. If you
   want  to access another mail folder at the IMAP server, you should use
   imap://imapserver/path/to/folder where path/to/folder is the path of the
   folder you want to access.

   You can select an alternative port by specifying it with the server, ie:
   imap://imapserver:port/INBOX.

   You   can  also  specify  different  username  for  each  folder,  ie:
   imap://username@imapserver[:port]/INBOX.

   If Mutt was compiled with SSL support (by running the configure script with
   the --with-ssl flag), connections to IMAP servers can be encrypted. This
   naturally requires that the server supports SSL encrypted connections. To
   access     a     folder     with     IMAP/SSL,    you    should    use
   imaps://[username@]imapserver[:port]/path/to/folder as your folder path.

   Pine-compatible      notation      is      also      supported,     ie
   {[username@]imapserver[:port][/ssl]}path/to/folder

   Note that not all servers use / as the hierarchy separator. Mutt should
   correctly notice which separator is being used by the server and convert
   paths accordingly.

   When browsing folders on an IMAP server, you can toggle whether to look at
   only  the  folders  you  are  subscribed  to,  or all folders with the
   toggle-subscribed command. See also the $imap_list_subscribed variable.

   Polling for new mail on an IMAP server can cause noticeable delays. So,
   you'll  want to carefully tune the $mail_check and $timeout variables.
   Personally I use
set mail_check=90
set timeout=15

   with relatively good results over my slow modem line.

   Note that if you are using mbox as the mail store on UW servers prior to
   v12.250, the server has been reported to disconnect a client if another
   client selects the same folder.

12.1. The Folder Browser

   As of version 1.2, mutt supports browsing mailboxes on an IMAP server. This
   is  mostly  the  same  as  the  local file browser, with the following
   differences:
     * In lieu of file permissions, mutt displays the string "IMAP", possibly
       followed by the symbol "+", indicating that the entry contains both
       messages  and subfolders. On Cyrus-like servers folders will often
       contain both messages and subfolders.
     * For the case where an entry can contain both messages and subfolders,
       the selection key (bound to enter by default) will choose to descend
       into  the subfolder view. If you wish to view the messages in that
       folder, you must use view-file instead (bound to space by default).
     * You can create, delete and rename mailboxes with the create-mailbox,
       delete-mailbox, and rename-mailbox commands (default bindings: C, d and
       r, respectively). You may also subscribe and unsubscribe to mailboxes
       (normally these are bound to s and u, respectively).

12.2. Authentication

   Mutt supports four authentication methods with IMAP servers: SASL, GSSAPI,
   CRAM-MD5,  and  LOGIN  (there  is a patch by Grant Edwards to add NTLM
   authentication for you poor exchange users out there, but it has yet to be
   integrated  into  the  main  tree).  There  is  also  support  for the
   pseudo-protocol ANONYMOUS, which allows you to log in to a public IMAP
   server  without  having an account. To use ANONYMOUS, simply make your
   username blank or "anonymous".

   SASL is a special super-authenticator, which selects among several protocols
   (including GSSAPI, CRAM-MD5, ANONYMOUS, and DIGEST-MD5) the most secure
   method available on your host and the server. Using some of these methods
   (including DIGEST-MD5 and possibly GSSAPI), your entire session will be
   encrypted and invisible to those teeming network snoops. It is the best
   option if you have it. To use it, you must have the Cyrus SASL library
   installed on your system and compile mutt with the --with-sasl flag.

   Mutt will try whichever methods are compiled in and available on the server,
   in the following order: SASL, ANONYMOUS, GSSAPI, CRAM-MD5, LOGIN.

   There are a few variables which control authentication:
     * $imap_user  -  controls  the  username  under  which  you  request
       authentication on the IMAP server, for all authenticators. This is
       overridden by an explicit username in the mailbox path (ie by using a
       mailbox name of the form {user@host}).
     * $imap_pass - a password which you may preset, used by all authentication
       methods where a password is needed.
     * $imap_authenticators - a colon-delimited list of IMAP authentication
       methods to try, in the order you wish to try them. If specified, this
       overrides  mutt's default (attempt everything, in the order listed
       above).

13. Managing multiple IMAP/POP accounts (OPTIONAL)

   If you happen to have accounts on multiple IMAP and/or POP servers, you may
   find managing all the authentication settings inconvenient and error-prone.
   The account-hook command may help. This hook works like folder-hook but is
   invoked whenever you access a remote mailbox (including inside the folder
   browser), not just when you open the mailbox.

   Some examples:

account-hook . 'unset imap_user; unset imap_pass; unset tunnel'
account-hook imap://host1/ 'set imap_user=me1 imap_pass=foo'
account-hook imap://host2/ 'set tunnel="ssh host2 /usr/libexec/imapd"'

14. Start a WWW Browser on URLs (EXTERNAL)

   If a message contains URLs (unified resource locator = address in the WWW
   space like http://www.mutt.org/), it is efficient to get a menu with all the
   URLs and start a WWW browser on one of them. This functionality is provided
   by   the   external   urlview   program  which  can  be  retrieved  at
   ftp://ftp.mutt.org/mutt/contrib/ and the configuration commands:
macro index \cb |urlview\n
macro pager \cb |urlview\n

15. Local caching (OPTIONAL)

   Mutt  contains  two types of local caching: (1) the so-called ``header
   caching'' and (2) the so-called ``body caching'' which are both described in
   this section.

   These are optional which means they're not enabled by default. Details on
   how  to  enable  either of these techniques are given in the following
   subsections.

15.1. Header caching

   Mutt provides optional support for caching message headers for the following
   types of folders: IMAP, POP, Maildir and MH. Header caching greatly improves
   speed because for remote folders, headers usually only need to be downloaded
   once. For Maildir and MH, reading the headers from a single file is much
   faster than looking at possibly thousands of single files (since Maildir and
   MH use one file per message.)

   Header  caching  can  be  enabled  via  the  configure  script and the
   --enable-hcache option. It's not turned on by default because external
   database libraries are required: one of qdbm, gdbm or bdb must be present.

   If  enabled,  $header_cache can be used to either point to a file or a
   directory. If set to point to a file, one database file for all folders will
   be used (which may result in lower performance), but one file per folder if
   it points to a directory.

   For the one-file-per-folder case, database files will be named by MD5 sums.
   They may be safely removed if a system is short on space. You can compute
   the name of the header cache file for a particular folder through a command
   like the following:

$ printf '%s' '/path/to/folder' | md5sum
$ printf '%s' 'imaps://user@host/path/to/folder' | md5sum
$ printf '%s' 'pops://user@host' | md5sum

   The  md5sum command may also be named md5, depending on your operating
   system.

15.2. Body caching

   In addition to caching message headers only, mutt can also cache whole
   message bodies. This results in faster display of messages for POP and IMAP
   folders because messages usually have to be downloaded only once.

   If the configure script is called with --enable-pop and/or --enable-imap,
   body caching will be built in as it does not require additional software
   packages such as database libraries.

   For configuration, the variable $message_cachedir must point to a directory.
   There,  mutt  will  create  a  hierarchy of subdirectories named like:
   proto:user@hostname where proto is either ``pop'' or ``imap.'' Within there
   for each folder, mutt stores messages in single files (just like Maildir) so
   that with manual symlink creation these cache directories can be examined
   with mutt as read-only Maildir folders.

   All files can be removed as needed if the consumed disk space becomes an
   issue as mutt will silently fetch missing items again.

Chapter 5. Mutt's MIME Support

   Table of Contents

   1. Using MIME in Mutt

        1.1. Viewing MIME messages in the pager
        1.2. The Attachment Menu
        1.3. The Compose Menu

   2. MIME Type configuration with mime.types
   3. MIME Viewer configuration with mailcap

        3.1. The Basics of the mailcap file
        3.2. Secure use of mailcap
        3.3. Advanced mailcap Usage
        3.4. Example mailcap files

   4. MIME Autoview
   5. MIME Multipart/Alternative
   6. Attachment Searching and Counting
   7. MIME Lookup

   Quite a bit of effort has been made to make Mutt the premier text-mode MIME
   MUA.  Every effort has been made to provide the functionality that the
   discerning MIME user requires, and the conformance to the standards wherever
   possible. When configuring Mutt for MIME, there are two extra types of
   configuration files which Mutt uses. One is the mime.types file, which
   contains the mapping of file extensions to IANA MIME types. The other is the
   mailcap file, which specifies the external commands to use for handling
   specific MIME types.

1. Using MIME in Mutt

   There are three areas/menus in Mutt which deal with MIME, they are the pager
   (while viewing a message), the attachment menu and the compose menu.

1.1. Viewing MIME messages in the pager

   When you select a message from the index and view it in the pager, Mutt
   decodes the message to a text representation. Mutt internally supports a
   number of MIME types, including text/plain, text/enriched, message/rfc822,
   and  message/news.  In addition, the export controlled version of Mutt
   recognizes  a  variety  of  PGP  MIME  types,  including  PGP/MIME and
   application/pgp.

   Mutt will denote attachments with a couple lines describing them. These
   lines are of the form:
[-- Attachment #1: Description --]
[-- Type: text/plain, Encoding: 7bit, Size: 10000 --]

   Where  the  Description  is  the description or filename given for the
   attachment, and the Encoding is one of
   7bit/8bit/quoted-printable/base64/binary.

   If Mutt cannot deal with a MIME type, it will display a message like:
[-- image/gif is unsupported (use 'v' to view this part) --]

1.2. The Attachment Menu

   The  default  binding  for view-attachments is `v', which displays the
   attachment menu for a message. The attachment menu displays a list of the
   attachments in a message. From the attachment menu, you can save, print,
   pipe, delete, and view attachments. You can apply these operations to a
   group of attachments at once, by tagging the attachments and by using the
   ``tag-prefix'' operator. You can also reply to the current message from this
   menu, and only the current attachment (or the attachments tagged) will be
   quoted in your reply. You can view attachments as text, or view them using
   the mailcap viewer definition.

   Finally,  you  can  apply  the  usual  message-related functions (like
   resend-message, and the reply and forward functions) to attachments of type
   message/rfc822.

   See the help on the attachment menu for more information.

1.3. The Compose Menu

   The compose menu is the menu you see before you send a message. It allows
   you to edit the recipient list, the subject, and other aspects of your
   message.  It  also contains a list of the attachments of your message,
   including the main body. From this menu, you can print, copy, filter, pipe,
   edit,  compose,  review,  and rename an attachment or a list of tagged
   attachments. You can also modifying the attachment information, notably the
   type, encoding and description.

   Attachments appear as follows:
-   1 [text/plain, 7bit, 1K]             /tmp/mutt-euler-8082-0 <no description
>
    2 [applica/x-gunzip, base64, 422K]   ~/src/mutt-0.85.tar.gz <no description
>

   The '-' denotes that Mutt will delete the file after sending (or postponing,
   or canceling) the message. It can be toggled with the toggle-unlink command
   (default: u). The next field is the MIME content-type, and can be changed
   with the edit-type command (default: ^T). The next field is the encoding for
   the attachment, which allows a binary message to be encoded for transmission
   on 7bit links. It can be changed with the edit-encoding command (default:
   ^E). The next field is the size of the attachment, rounded to kilobytes or
   megabytes. The next field is the filename, which can be changed with the
   rename-file command (default: R). The final field is the description of the
   attachment, and can be changed with the edit-description command (default:
   d).

2. MIME Type configuration with mime.types

   When you add an attachment to your mail message, Mutt searches your personal
   mime.types file at ${HOME}/.mime.types, and then the system mime.types file
   at /usr/local/share/mutt/mime.types or /etc/mime.types

   The mime.types file consist of lines containing a MIME type and a space
   separated list of extensions. For example:
application/postscript          ps eps
application/pgp                 pgp
audio/x-aiff                    aif aifc aiff

   A  sample mime.types file comes with the Mutt distribution, and should
   contain most of the MIME types you are likely to use.

   If Mutt can not determine the mime type by the extension of the file you
   attach, it will look at the file. If the file is free of binary information,
   Mutt will assume that the file is plain text, and mark it as text/plain. If
   the  file  contains  binary  information,  then  Mutt  will mark it as
   application/octet-stream. You can change the MIME type that Mutt assigns to
   an attachment by using the edit-type command from the compose menu (default:
   ^T). The MIME type is actually a major mime type followed by the sub-type,
   separated by a '/'. 6 major types: application, text, image, video, audio,
   and  model have been approved after various internet discussions. Mutt
   recognizes all of these if the appropriate entry is found in the mime.types
   file. It also recognizes other major mime types, such as the chemical type
   that is widely used in the molecular modeling community to pass molecular
   data in various forms to various molecular viewers. Non-recognized mime
   types should only be used if the recipient of the message is likely to be
   expecting such attachments.

3. MIME Viewer configuration with mailcap

   Mutt supports RFC 1524 MIME Configuration, in particular the Unix specific
   format specified in Appendix A of RFC 1524. This file format is commonly
   referred to as the mailcap format. Many MIME compliant programs utilize the
   mailcap format, allowing you to specify handling for all MIME types in one
   place for all programs. Programs known to use this format include Netscape,
   XMosaic, lynx and metamail.

   In order to handle various MIME types that Mutt can not handle internally,
   Mutt parses a series of external configuration files to find an external
   handler. The default search string for these files is a colon delimited list
   set to
${HOME}/.mailcap:/usr/local/share/mutt/mailcap:/etc/mailcap:/etc/mailcap:/usr/e
tc/mailcap:/usr/local/etc/mailcap

   where $HOME is your home directory.

   In  particular, the metamail distribution will install a mailcap file,
   usually as /usr/local/etc/mailcap, which contains some baseline entries.

3.1. The Basics of the mailcap file

   A mailcap file consists of a series of lines which are comments, blank, or
   definitions.

   A comment line consists of a # character followed by anything you want.

   A blank line is blank.

   A definition line consists of a content type, a view command, and any number
   of  optional  fields.  Each field of a definition line is divided by a
   semicolon ';' character.

   The content type is specified in the MIME standard type/subtype method. For
   example, text/plain, text/html, image/gif, etc. In addition, the mailcap
   format  includes  two formats for wildcards, one using the special '*'
   subtype, the other is the implicit wild, where you only include the major
   type. For example, image/*, or video, will match all image types and video
   types, respectively.

   The view command is a Unix command for viewing the type specified. There are
   two different types of commands supported. The default is to send the body
   of the MIME message to the command on stdin. You can change this behavior by
   using %s as a parameter to your view command. This will cause Mutt to save
   the body of the MIME message to a temporary file, and then call the view
   command with the %s replaced by the name of the temporary file. In both
   cases,  Mutt will turn over the terminal to the view program until the
   program quits, at which time Mutt will remove the temporary file if it
   exists.

   So, in the simplest form, you can send a text/plain message to the external
   pager more on stdin:
text/plain; more

   Or, you could send the message as a file:
text/plain; more %s

   Perhaps  you  would like to use lynx to interactively view a text/html
   message:
text/html; lynx %s

   In this case, lynx does not support viewing a file from stdin, so you must
   use the %s syntax. Note: Some older versions of lynx contain a bug where
   they will check the mailcap file for a viewer for text/html. They will find
   the line which calls lynx, and run it. This causes lynx to continuously
   spawn itself to view the object.

   On the other hand, maybe you don't want to use lynx interactively, you just
   want to have it convert the text/html to text/plain, then you can use:
text/html; lynx -dump %s | more

   Perhaps you wish to use lynx to view text/html files, and a pager on all
   other text formats, then you would use the following:
text/html; lynx %s
text/*; more

   This is the simplest form of a mailcap file.

3.2. Secure use of mailcap

   The interpretation of shell meta-characters embedded in MIME parameters can
   lead to security problems in general. Mutt tries to quote parameters in
   expansion  of  %s  syntaxes  properly,  and avoids risky characters by
   substituting them, see the $mailcap_sanitize variable.

   Although mutt's procedures to invoke programs with mailcap seem to be safe,
   there are other applications parsing mailcap, maybe taking less care of it.
   Therefore you should pay attention to the following rules:

   Keep the %-expandos away from shell quoting. Don't quote them with single or
   double quotes. Mutt does this for you, the right way, as should any other
   program which interprets mailcap. Don't put them into backtick expansions.
   Be highly careful with eval statements, and avoid them if possible at all.
   Trying to fix broken behavior with quotes introduces new leaks - there is no
   alternative to correct quoting in the first place.

   If you have to use the %-expandos' values in context where you need quoting
   or backtick expansions, put that value into a shell variable and reference
   the shell variable where necessary, as in the following example (using
   $charset inside the backtick expansion is safe, since it is not itself
   subject to any further expansion):

text/test-mailcap-bug; cat %s; copiousoutput; test=charset=%{charset} \
        && test "`echo $charset | tr '[A-Z]' '[a-z]'`" != iso-8859-1

3.3. Advanced mailcap Usage

3.3.1. Optional Fields

   In addition to the required content-type and view command fields, you can
   add semi-colon ';' separated fields to set flags and other options. Mutt
   recognizes the following optional fields:

   copiousoutput
          This flag tells Mutt that the command passes possibly large amounts
          of text on stdout. This causes Mutt to invoke a pager (either the
          internal pager or the external pager defined by the pager variable)
          on the output of the view command. Without this flag, Mutt assumes
          that the command is interactive. One could use this to replace the
          pipe to more in the lynx -dump example in the Basic section:

text/html; lynx -dump %s ; copiousoutput

          This will cause lynx to format the text/html output as text/plain and
          Mutt will use your standard pager to display the results.

   needsterminal
          Mutt uses this flag when viewing attachments with auto_view, in order
          to  decide whether it should honor the setting of the $wait_key
          variable or not. When an attachment is viewed using an interactive
          program, and the corresponding mailcap entry has a needsterminal
          flag, Mutt will use $wait_key and the exit status of the program to
          decide if it will ask you to press a key after the external program
          has exited. In all other situations it will not prompt you for a key.

   compose=<command>
          This flag specifies the command to use to create a new attachment of
          a specific MIME type. Mutt supports this from the compose menu.

   composetyped=<command>
          This flag specifies the command to use to create a new attachment of
          a specific MIME type. This command differs from the compose command
          in that mutt will expect standard MIME headers on the data. This can
          be used to specify parameters, filename, description, etc. for a new
          attachment. Mutt supports this from the compose menu.

   print=<command>
          This flag specifies the command to use to print a specific MIME type.
          Mutt supports this from the attachment and compose menus.

   edit=<command>
          This flag specifies the command to use to edit a specific MIME type.
          Mutt supports this from the compose menu, and also uses it to compose
          new attachments. Mutt will default to the defined editor for text
          attachments.

   nametemplate=<template>
          This field specifies the format for the file denoted by %s in the
          command  fields.  Certain  programs will require a certain file
          extension, for instance, to correctly view a file. For instance, lynx
          will only interpret a file as text/html if the file ends in .html.
          So, you would specify lynx as a text/html viewer with a line in the
          mailcap file like:

text/html; lynx %s; nametemplate=%s.html

   test=<command>
          This field specifies a command to run to test whether this mailcap
          entry  should  be used. The command is defined with the command
          expansion rules defined in the next section. If the command returns
          0, then the test passed, and Mutt uses this entry. If the command
          returns non-zero, then the test failed, and Mutt continues searching
          for the right entry. Note: the content-type must match before Mutt
          performs the test. For example:

text/html; netscape -remote 'openURL(%s)' ; test=RunningX
text/html; lynx %s

          In this example, Mutt will run the program RunningX which will return
          0 if the X Window manager is running, and non-zero if it isn't. If
          RunningX returns 0, then Mutt will call netscape to display the
          text/html object. If RunningX doesn't return 0, then Mutt will go on
          to the next entry and use lynx to display the text/html object.

3.3.2. Search Order

   When searching for an entry in the mailcap file, Mutt will search for the
   most useful entry for its purpose. For instance, if you are attempting to
   print an image/gif, and you have the following entries in your mailcap file,
   Mutt will search for an entry with the print command:
image/*;        xv %s
image/gif;      ; print= anytopnm %s | pnmtops | lpr; \
                nametemplate=%s.gif

   Mutt will skip the image/* entry and use the image/gif entry with the print
   command.

   In addition, you can use this with auto_view to denote two commands for
   viewing an attachment, one to be viewed automatically, the other to be
   viewed interactively from the attachment menu. In addition, you can then use
   the test feature to determine which viewer to use interactively depending on
   your environment.
text/html;      netscape -remote 'openURL(%s)' ; test=RunningX
text/html;      lynx %s; nametemplate=%s.html
text/html;      lynx -dump %s; nametemplate=%s.html; copiousoutput

   For auto_view, Mutt will choose the third entry because of the copiousoutput
   tag.  For  interactive  viewing, Mutt will run the program RunningX to
   determine if it should use the first entry. If the program returns non-zero,
   Mutt will use the second entry for interactive viewing.

3.3.3. Command Expansion

   The various commands defined in the mailcap files are passed to the /bin/sh
   shell using the system() function. Before the command is passed to /bin/sh
   -c, it is parsed to expand various special parameters with information from
   Mutt. The keywords Mutt expands are:

   %s
          As seen in the basic mailcap section, this variable is expanded to a
          filename specified by the calling program. This file contains the
          body of the message to view/print/edit or where the composing program
          should place the results of composition. In addition, the use of this
          keyword  causes Mutt to not pass the body of the message to the
          view/print/edit program on stdin.

   %t
          Mutt will expand %t to the text representation of the content type of
          the message in the same form as the first parameter of the mailcap
          definition line, ie text/html or image/gif.

   %{<parameter>}
          Mutt will expand this to the value of the specified parameter from
          the Content-Type: line of the mail message. For instance, if Your
          mail message contains:

Content-Type: text/plain; charset=iso-8859-1

          then Mutt will expand %{charset} to iso-8859-1. The default metamail
          mailcap file uses this feature to test the charset to spawn an xterm
          using the right charset to view the message.

   \%
          This will be replaced by a %

   Mutt does not currently support the %F and %n keywords specified in RFC
   1524. The main purpose of these parameters is for multipart messages, which
   is handled internally by Mutt.

3.4. Example mailcap files

   This mailcap file is fairly simple and standard:
# I'm always running X :)
video/*;        xanim %s > /dev/null
image/*;        xv %s > /dev/null

# I'm always running netscape (if my computer had more memory, maybe)
text/html;      netscape -remote 'openURL(%s)'

   This mailcap file shows quite a number of examples:

# Use xanim to view all videos   Xanim produces a header on startup,
# send that to /dev/null so I don't see it
video/*;        xanim %s > /dev/null

# Send html to a running netscape by remote
text/html;      netscape -remote 'openURL(%s)'; test=RunningNetscape

# If I'm not running netscape but I am running X, start netscape on the
# object
text/html;      netscape %s; test=RunningX

# Else use lynx to view it as text
text/html;      lynx %s

# This version would convert the text/html to text/plain
text/html;      lynx -dump %s; copiousoutput

# I use enscript to print text in two columns to a page
text/*;         more %s; print=enscript -2Gr %s

# Netscape adds a flag to tell itself to view jpegs internally
image/jpeg;xv %s; x-mozilla-flags=internal

# Use xv to view images if I'm running X
# In addition, this uses the \ to extend the line and set my editor
# for images
image/*;xv %s; test=RunningX; \
        edit=xpaint %s

# Convert images to text using the netpbm tools
image/*;  (anytopnm %s | pnmscale -xysize 80 46 | ppmtopgm | pgmtopbm |
pbmtoascii -1x2 ) 2>&1 ; copiousoutput

# Send excel spreadsheets to my NT box
application/ms-excel; open.pl %s

4. MIME Autoview

   In addition to explicitly telling Mutt to view an attachment with the MIME
   viewer defined in the mailcap file, Mutt has support for automatically
   viewing MIME attachments while in the pager.

   To  work,  you must define a viewer in the mailcap file which uses the
   copiousoutput option to denote that it is non-interactive. Usually, you also
   use the entry to convert the attachment to a text representation which you
   can view in the pager.

   You then use the auto_view muttrc command to list the content-types that you
   wish to view automatically.

   For instance, if you set auto_view to:
auto_view text/html application/x-gunzip application/postscript image/gif appli
cation/x-tar-gz

   Mutt  could  use  the  following mailcap entries to automatically view
   attachments of these types.
text/html;      lynx -dump %s; copiousoutput; nametemplate=%s.html
image/*;        anytopnm %s | pnmscale -xsize 80 -ysize 50 | ppmtopgm | pgmtopb
m | pbmtoascii ; copiousoutput
application/x-gunzip;   gzcat; copiousoutput
application/x-tar-gz; gunzip -c %s | tar -tf - ; copiousoutput
application/postscript; ps2ascii %s; copiousoutput

   ``unauto_view'' can be used to remove previous entries from the autoview
   list. This can be used with message-hook to autoview messages based on size,
   etc. ``unauto_view *'' will remove all previous entries.

5. MIME Multipart/Alternative

   Mutt  has  some  heuristics  for  determining  which  attachment  of a
   multipart/alternative  type  to  display.  First,  mutt will check the
   alternative_order  list  to determine if one of the available types is
   preferred. The alternative_order list consists of a number of mimetypes in
   order, including support for implicit and explicit wildcards, for example:
alternative_order text/enriched text/plain text application/postscript image/*

   Next, mutt will check if any of the types have a defined auto_view, and use
   that. Failing that, Mutt will look for any text type. As a last attempt,
   mutt will look for any type it knows how to handle.

   To  remove  a  MIME  type  from  the  alternative_order  list, use the
   unalternative_order command.

6. Attachment Searching and Counting

   If  you  ever  lose  track  of  attachments  in your mailboxes, Mutt's
   attachment-counting and -searching support might be for you. You can make
   your message index display the number of qualifying attachments in each
   message, or search for messages by attachment count. You also can configure
   what kinds of attachments qualify for this feature with the attachments and
   unattachments commands.

   In order to provide this information, mutt needs to fully MIME-parse all
   messages affected first. This can slow down operation especially for remote
   mail folders such as IMAP because all messages have to be downloaded first
   regardless whether the user really wants to view them or not.

   The syntax is:
attachments   {+|-}disposition mime-type
unattachments {+|-}disposition mime-type
attachments   ?

   Disposition is the attachment's Content-disposition type -- either "inline"
   or "attachment". You can abbreviate this to I or A.

   Disposition is prefixed by either a + symbolor a - symbol. If it's a +,
   you're saying that you want to allow this disposition and MIME type to
   qualify. If it's a -, you're saying that this disposition and MIME type is
   an exception to previous + rules. There are examples below of how this is
   useful.

   Mime-type is, unsurprisingly, the MIME type of the attachment you want to
   affect. A MIME type is always of the format "major/minor", where "major"
   describes the broad category of document you're looking at, and "minor"
   describes the specific type within that category. The major part of mim-type
   must be literal text (or the special token "*"), but the minor part may be a
   regular expression. (Therefore, "*/.*" matches any MIME type.)

   The MIME types you give to the attachments directive are a kind of pattern.
   When you use the attachments directive, the patterns you specify are added
   to a list. When you use unattachments, the pattern is removed from the list.
   The patterns are not expanded and matched to specific MIME types at this
   time -- they're just text in a list. They're only matched when actually
   evaluating a message.

   Some examples might help to illustrate. The examples that are not commented
   out define the default configuration of the lists.
## Removing a pattern from a list removes that pattern literally. It
## does not remove any type matching the pattern.
##
##  attachments   +A */.*
##  attachments   +A image/jpeg
##  unattachments +A */.*
##
## This leaves "attached" image/jpeg files on the allowed attachments
## list. It does not remove all items, as you might expect, because the
## second */.* is not a matching expression at this time.
##
## Remember: "unattachments" only undoes what "attachments" has done!
## It does not trigger any matching on actual messages.


## Qualify any MIME part with an "attachment" disposition, EXCEPT for
## text/x-vcard and application/pgp parts. (PGP parts are already known
## to mutt, and can be searched for with ~g, ~G, and ~k.)
##
## I've added x-pkcs7 to this, since it functions (for S/MIME)
## analogously to PGP signature attachments. S/MIME isn't supported
## in a stock mutt build, but we can still treat it specially here.
##
attachments   +A */.*
attachments   -A text/x-vcard application/pgp.*
attachments   -A application/x-pkcs7-.*

## Discount all MIME parts with an "inline" disposition, unless they're
## text/plain. (Why inline a text/plain part unless it's external to the
## message flow?)
##
attachments   +I text/plain

## These two lines make Mutt qualify MIME containers.  (So, for example,
## a message/rfc822 forward will count as an attachment.)  The first
## line is unnecessary if you already have "attach-allow */.*", of
## course.  These are off by default!  The MIME elements contained
## within a message/* or multipart/* are still examined, even if the
## containers themseves don't qualify.
##
#attachments  +A message/.* multipart/.*
#attachments  +I message/.* multipart/.*

## You probably don't really care to know about deleted attachments.
attachments   -A message/external-body
attachments   -I message/external-body

   "attachments ?" will list your current settings in Muttrc format, so that it
   can be pasted elsewhere.

7. MIME Lookup

   Mutt's mime_lookup list specifies a list of mime-types that should not be
   treated according to their mailcap entry. This option is designed to deal
   with binary types such as application/octet-stream. When an attachment's
   mime-type is listed in mime_lookup, then the extension of the filename will
   be compared to the list of extensions in the mime.types file. The mime-type
   associated with this extension will then be used to process the attachment
   according  to the rules in the mailcap file and according to any other
   configuration options (such as auto_view) specified. Common usage would be:
mime_lookup application/octet-stream application/X-Lotus-Manuscript

   In addition, the unmime_lookup command may be used to disable this feature
   for any particular mime-type if it had been set, for example, in a global
   muttrc.

Chapter 6. Reference

   Table of Contents

   1. Command line options
   2. Configuration Commands
   3. Configuration variables

        3.1. abort_nosubject
        3.2. abort_unmodified
        3.3. alias_file
        3.4. alias_format
        3.5. allow_8bit
        3.6. allow_ansi
        3.7. arrow_cursor
        3.8. ascii_chars
        3.9. askbcc
        3.10. askcc
        3.11. attach_format
        3.12. attach_sep
        3.13. attach_split
        3.14. attribution
        3.15. autoedit
        3.16. auto_tag
        3.17. beep
        3.18. beep_new
        3.19. bounce
        3.20. bounce_delivered
        3.21. braille_friendly
        3.22. charset
        3.23. check_new
        3.24. collapse_unread
        3.25. uncollapse_jump
        3.26. compose_format
        3.27. config_charset
        3.28. confirmappend
        3.29. confirmcreate
        3.30. connect_timeout
        3.31. content_type
        3.32. copy
        3.33. crypt_use_gpgme
        3.34. crypt_autopgp
        3.35. crypt_autosmime
        3.36. date_format
        3.37. default_hook
        3.38. delete
        3.39. delete_untag
        3.40. digest_collapse
        3.41. display_filter
        3.42. dotlock_program
        3.43. dsn_notify
        3.44. dsn_return
        3.45. duplicate_threads
        3.46. edit_headers
        3.47. editor
        3.48. encode_from
        3.49. envelope_from_address
        3.50. escape
        3.51. fast_reply
        3.52. fcc_attach
        3.53. fcc_clear
        3.54. folder
        3.55. folder_format
        3.56. followup_to
        3.57. force_name
        3.58. forward_decode
        3.59. forward_edit
        3.60. forward_format
        3.61. forward_quote
        3.62. from
        3.63. gecos_mask
        3.64. hdrs
        3.65. header
        3.66. help
        3.67. hidden_host
        3.68. hide_limited
        3.69. hide_missing
        3.70. hide_thread_subject
        3.71. hide_top_limited
        3.72. hide_top_missing
        3.73. history
        3.74. honor_followup_to
        3.75. hostname
        3.76. ignore_list_reply_to
        3.77. imap_authenticators
        3.78. imap_check_subscribed
        3.79. imap_delim_chars
        3.80. imap_headers
        3.81. imap_home_namespace
        3.82. imap_idle
        3.83. imap_keepalive
        3.84. imap_list_subscribed
        3.85. imap_login
        3.86. imap_pass
        3.87. imap_passive
        3.88. imap_peek
        3.89. imap_servernoise
        3.90. imap_user
        3.91. implicit_autoview
        3.92. include
        3.93. include_onlyfirst
        3.94. indent_string
        3.95. index_format
        3.96. ispell
        3.97. keep_flagged
        3.98. locale
        3.99. mail_check
        3.100. mailcap_path
        3.101. mailcap_sanitize
        3.102. header_cache
        3.103. maildir_header_cache_verify
        3.104. header_cache_pagesize
        3.105. header_cache_compress
        3.106. maildir_trash
        3.107. mark_old
        3.108. markers
        3.109. mask
        3.110. mbox
        3.111. mbox_type
        3.112. metoo
        3.113. menu_context
        3.114. menu_move_off
        3.115. menu_scroll
        3.116. meta_key
        3.117. mh_purge
        3.118. mh_seq_flagged
        3.119. mh_seq_replied
        3.120. mh_seq_unseen
        3.121. mime_forward
        3.122. mime_forward_decode
        3.123. mime_forward_rest
        3.124. mix_entry_format
        3.125. mixmaster
        3.126. move
        3.127. message_cachedir
        3.128. message_format
        3.129. narrow_tree
        3.130. net_inc
        3.131. pager
        3.132. pager_context
        3.133. pager_format
        3.134. pager_index_lines
        3.135. pager_stop
        3.136. crypt_autosign
        3.137. crypt_autoencrypt
        3.138. pgp_ignore_subkeys
        3.139. crypt_replyencrypt
        3.140. crypt_replysign
        3.141. crypt_replysignencrypted
        3.142. crypt_timestamp
        3.143. pgp_use_gpg_agent
        3.144. crypt_verify_sig
        3.145. smime_is_default
        3.146. smime_ask_cert_label
        3.147. smime_decrypt_use_default_key
        3.148. pgp_entry_format
        3.149. pgp_good_sign
        3.150. pgp_check_exit
        3.151. pgp_long_ids
        3.152. pgp_retainable_sigs
        3.153. pgp_autoinline
        3.154. pgp_replyinline
        3.155. pgp_show_unusable
        3.156. pgp_sign_as
        3.157. pgp_strict_enc
        3.158. pgp_timeout
        3.159. pgp_sort_keys
        3.160. pgp_mime_auto
        3.161. pgp_auto_decode
        3.162. pgp_decode_command
        3.163. pgp_getkeys_command
        3.164. pgp_verify_command
        3.165. pgp_decrypt_command
        3.166. pgp_clearsign_command
        3.167. pgp_sign_command
        3.168. pgp_encrypt_sign_command
        3.169. pgp_encrypt_only_command
        3.170. pgp_import_command
        3.171. pgp_export_command
        3.172. pgp_verify_key_command
        3.173. pgp_list_secring_command
        3.174. pgp_list_pubring_command
        3.175. forward_decrypt
        3.176. smime_timeout
        3.177. smime_encrypt_with
        3.178. smime_keys
        3.179. smime_ca_location
        3.180. smime_certificates
        3.181. smime_decrypt_command
        3.182. smime_verify_command
        3.183. smime_verify_opaque_command
        3.184. smime_sign_command
        3.185. smime_sign_opaque_command
        3.186. smime_encrypt_command
        3.187. smime_pk7out_command
        3.188. smime_get_cert_command
        3.189. smime_get_signer_cert_command
        3.190. smime_import_cert_command
        3.191. smime_get_cert_email_command
        3.192. smime_default_key
        3.193. ssl_client_cert
        3.194. ssl_force_tls
        3.195. ssl_starttls
        3.196. certificate_file
        3.197. ssl_usesystemcerts
        3.198. entropy_file
        3.199. ssl_use_sslv2
        3.200. ssl_use_sslv3
        3.201. ssl_use_tlsv1
        3.202. ssl_min_dh_prime_bits
        3.203. ssl_ca_certificates_file
        3.204. pipe_split
        3.205. pipe_decode
        3.206. pipe_sep
        3.207. pop_authenticators
        3.208. pop_auth_try_all
        3.209. pop_checkinterval
        3.210. pop_delete
        3.211. pop_host
        3.212. pop_last
        3.213. pop_reconnect
        3.214. pop_user
        3.215. pop_pass
        3.216. post_indent_string
        3.217. postpone
        3.218. postponed
        3.219. preconnect
        3.220. print
        3.221. print_command
        3.222. print_decode
        3.223. print_split
        3.224. prompt_after
        3.225. query_command
        3.226. quit
        3.227. quote_regexp
        3.228. read_inc
        3.229. read_only
        3.230. realname
        3.231. recall
        3.232. record
        3.233. reply_regexp
        3.234. reply_self
        3.235. reply_to
        3.236. resolve
        3.237. reverse_alias
        3.238. reverse_name
        3.239. reverse_realname
        3.240. rfc2047_parameters
        3.241. save_address
        3.242. save_empty
        3.243. save_name
        3.244. score
        3.245. score_threshold_delete
        3.246. score_threshold_flag
        3.247. score_threshold_read
        3.248. send_charset
        3.249. sendmail
        3.250. sendmail_wait
        3.251. shell
        3.252. sig_dashes
        3.253. sig_on_top
        3.254. signature
        3.255. simple_search
        3.256. smart_wrap
        3.257. smileys
        3.258. sleep_time
        3.259. sort
        3.260. sort_alias
        3.261. sort_aux
        3.262. sort_browser
        3.263. sort_re
        3.264. spam_separator
        3.265. spoolfile
        3.266. status_chars
        3.267. status_format
        3.268. status_on_top
        3.269. strict_threads
        3.270. suspend
        3.271. text_flowed
        3.272. thread_received
        3.273. thorough_search
        3.274. tilde
        3.275. timeout
        3.276. tmpdir
        3.277. to_chars
        3.278. tunnel
        3.279. use_8bitmime
        3.280. use_domain
        3.281. use_envelope_from
        3.282. use_from
        3.283. use_idn
        3.284. use_ipv6
        3.285. user_agent
        3.286. visual
        3.287. wait_key
        3.288. weed
        3.289. wrap_search
        3.290. wrapmargin
        3.291. write_inc
        3.292. write_bcc

   4. Functions

        4.1. generic
        4.2. index
        4.3. pager
        4.4. alias
        4.5. query
        4.6. attach
        4.7. compose
        4.8. postpone
        4.9. browser
        4.10. pgp
        4.11. editor

1. Command line options

   Running mutt with no arguments will make Mutt attempt to read your spool
   mailbox.  However,  it is possible to read other mailboxes and to send
   messages from the command line as well.

   Table 6.1. Command line options
  Option                              Description
  -A     expand an alias
  -a     attach a file to a message
  -b     specify a blind carbon-copy (BCC) address
  -c     specify a carbon-copy (Cc) address
  -D     print the value of all mutt variables to stdout
  -e     specify a config command to be run after initialization files are read
  -f     specify a mailbox to load
  -F     specify an alternate file to read initialization commands
  -h     print help on command line options
  -H     specify a draft file from which to read a header and body
  -i     specify a file to include in a message composition
  -m     specify a default mailbox type
  -n     do not read the system Muttrc
  -p     recall a postponed message
  -Q     query a configuration variable
  -R     open mailbox in read-only mode
  -s     specify a subject (enclose in quotes if it contains spaces)
  -v     show version number and compile-time definitions
  -x     simulate the mailx(1) compose mode
  -y     show a menu containing the files specified by the mailboxes command
  -z     exit immediately if there are no messages in the mailbox
  -Z     open the first folder with new message,exit immediately if none

   To read messages in a mailbox

   mutt [ -nz ] [ -F muttrc ] [ -m type ] [ -f mailbox ]

   To compose a new message

   mutt [ -n ] [ -F muttrc ] [ -a file ] [ -c address ] [ -i filename ] [ -s
   subject ] address [ address ... ]

   Mutt  also supports a ``batch'' mode to send prepared messages. Simply
   redirect input from the file you wish to send. For example,

   mutt -s "data set for run #2" professor@bigschool.edu < ˜/run2.dat

   This command will send a message to ``professor@bigschool.edu'' with a
   subject of ``data set for run #2''. In the body of the message will be the
   contents of the file ``˜/run2.dat''.

2. Configuration Commands

   The following are the commands understood by mutt.

     * account-hook pattern command
     * alias key address [ , address, ... ]
     * unalias [ * | key ... ]
     * alternates regexp [ regexp ... ]
     * unalternates [ * | regexp ... ]
     * alternative-order mimetype [ mimetype ... ]
     * unalternative-order mimetype [ mimetype ... ]
     * auto_view mimetype [ mimetype ... ]
     * unauto_view mimetype [ mimetype ... ]
     * bind map key function
     * charset-hook alias charset
     * color object foreground background [ regexp ]
     * uncolor index pattern [ pattern ... ]
     * exec function [ function ... ]
     * fcc-hook pattern mailbox
     * fcc-save-hook pattern mailbox
     * folder-hook pattern command
     * hdr_order header [ header ... ]
     * unhdr_order header [ header ... ]
     * charset-hook charset local-charset
     * ignore pattern [ pattern ... ]
     * unignore pattern [ pattern ... ]
     * lists regexp [ regexp ... ]
     * unlists regexp [ regexp ... ]
     * macro menu key sequence [ description ]
     * mailboxes filename [ filename ... ]
     * mbox-hook pattern mailbox
     * message-hook pattern command
     * mime_lookup mimetype [ mimetype ... ]
     * unmime_lookup mimetype [ mimetype ... ]
     * mono object attribute [ regexp ]
     * unmono index pattern [ pattern ... ]
     * my_hdr string
     * unmy_hdr field [ field ... ]
     * crypt-hook pattern key-id
     * push string
     * reset variable [variable ... ]
     * save-hook regexp filename
     * score pattern value
     * unscore pattern [ pattern ... ]
     * send-hook regexp command
     * reply-hook regexp command
     * set [no|inv]variable[=value] [ variable ... ]
     * unset variable [variable ... ]
     * source filename
     * spam pattern format
     * nospam pattern
     * subscribe regexp [ regexp ... ]
     * unsubscribe regexp [ regexp ... ]
     * toggle variable [variable ... ]
     * unhook hook-type

3. Configuration variables

3.1. abort_nosubject

   Type: quadoption
   Default: ask-yes

   If  set to yes, when composing messages and no subject is given at the
   subject  prompt,  composition will be aborted. If set to no, composing
   messages with no subject given at the subject prompt will never be aborted.

3.2. abort_unmodified

   Type: quadoption
   Default: yes

   If  set to yes, composition will automatically abort after editing the
   message body if no changes are made to the file (this check only happens
   after the first edit of the file). When set to no, composition will never be
   aborted.

3.3. alias_file

   Type: path
   Default: "˜/.muttrc"

   The default file in which to save aliases created by the ``create-alias''
   function.

   Note: Mutt will not automatically source this file; you must explicitly use
   the ``source'' command for it to be executed.

3.4. alias_format

   Type: string
   Default: "%4n %2f %t %-10a   %r"

   Specifies  the  format of the data displayed for the `alias' menu. The
   following printf(3)-style sequences are available:

   %a
          alias name

   %f
          flags - currently, a "d" for an alias marked for deletion

   %n
          index number

   %r
          address which alias expands to

   %t
          character which indicates if the alias is tagged for inclusion

3.5. allow_8bit

   Type: boolean
   Default: yes

   Controls whether 8-bit data is converted to 7-bit using either Quoted-
   Printable or Base64 encoding when sending mail.

3.6. allow_ansi

   Type: boolean
   Default: no

   Controls whether ANSI color codes in messages (and color tags in rich text
   messages) are to be interpreted. Messages containing these codes are rare,
   but if this option is set, their text will be colored accordingly. Note that
   this may override your color choices, and even present a security problem,
   since a message could include a line like "[-- PGP output follows ..." and
   give it the same color as your attachment color.

3.7. arrow_cursor

   Type: boolean
   Default: no

   When set, an arrow (``->'') will be used to indicate the current entry in
   menus instead of highlighting the whole line. On slow network or modem links
   this will make response faster because there is less that has to be redrawn
   on the screen when moving to the next or previous entries in the menu.

3.8. ascii_chars

   Type: boolean
   Default: no

   If set, Mutt will use plain ASCII characters when displaying thread and
   attachment trees, instead of the default ACS characters.

3.9. askbcc

   Type: boolean
   Default: no

   If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients before
   editing an outgoing message.

3.10. askcc

   Type: boolean
   Default: no

   If set, Mutt will prompt you for carbon-copy (Cc) recipients before editing
   the body of an outgoing message.

3.11. attach_format

   Type: string
   Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "

   This variable describes the format of the `attachment' menu. The following
   printf-style sequences are understood:

   %C
          charset

   %c
          requires charset conversion (n or c)

   %D
          deleted flag

   %d
          description

   %e
          MIME content-transfer-encoding

   %f
          filename

   %I
          disposition (I=inline, A=attachment)

   %m
          major MIME type

   %M
          MIME subtype

   %n
          attachment number

   %Q
          "Q", if MIME part qualifies for attachment counting

   %s
          size

   %t
          tagged flag

   %T
          graphic tree characters

   %u
          unlink (=to delete) flag

   %X
          number of qualifying MIME parts in this part and its children (please
          see the ``attachments'' section for possible speed effects)

   %>X
          right justify the rest of the string and pad with character "X"

   %|X
          pad to the end of the line with character "X"

3.12. attach_sep

   Type: string
   Default: "\n"

   The separator to add between attachments when operating (saving, printing,
   piping, etc) on a list of tagged attachments.

3.13. attach_split

   Type: boolean
   Default: yes

   If this variable is unset, when operating (saving, printing, piping, etc) on
   a list of tagged attachments, Mutt will concatenate the attachments and will
   operate on them as a single attachment. The ``$attach_sep'' separator is
   added after each attachment. When set, Mutt will operate on the attachments
   one by one.

3.14. attribution

   Type: string
   Default: "On %d, %n wrote:"

   This is the string that will precede a message which has been included in a
   reply. For a full listing of defined printf()-like sequences see the section
   on ``$index_format''.

3.15. autoedit

   Type: boolean
   Default: no

   When set along with ``$edit_headers'', Mutt will skip the initial send-menu
   and allow you to immediately begin editing the body of your message. The
   send-menu may still be accessed once you have finished editing the body of
   your message.

   Also see ``$fast_reply''.

3.16. auto_tag

   Type: boolean
   Default: no

   When set, functions in the index menu which affect a message will be applied
   to all tagged messages (if there are any). When unset, you must first use
   the tag-prefix function (default: ";") to make the next function apply to
   all tagged messages.

3.17. beep

   Type: boolean
   Default: yes

   When this variable is set, mutt will beep when an error occurs.

3.18. beep_new

   Type: boolean
   Default: no

   When this variable is set, mutt will beep whenever it prints a message
   notifying  you  of new mail. This is independent of the setting of the
   ``$beep'' variable.

3.19. bounce

   Type: quadoption
   Default: ask-yes

   Controls whether you will be asked to confirm bouncing messages. If set to
   yes  you don't get asked if you want to bounce a message. Setting this
   variable to no is not generally useful, and thus not recommended, because
   you are unable to bounce messages.

3.20. bounce_delivered

   Type: boolean
   Default: yes

   When this variable is set, mutt will include Delivered-To headers when
   bouncing messages. Postfix users may wish to unset this variable.

3.21. braille_friendly

   Type: boolean
   Default: no

   When this variable is set, mutt will place the cursor at the beginning of
   the current line in menus, even when the arrow_cursor variable is unset,
   making it easier for blind persons using Braille displays to follow these
   menus. The option is disabled by default because many visual terminals don't
   permit making the cursor invisible.

3.22. charset

   Type: string
   Default: ""

   Character set your terminal uses to display and enter textual data.

3.23. check_new

   Type: boolean
   Default: yes

   Note: this option only affects maildir and MH style mailboxes.

   When set, Mutt will check for new mail delivered while the mailbox is open.
   Especially with MH mailboxes, this operation can take quite some time since
   it involves scanning the directory and checking each file to see if it has
   already been looked at. If check_new is unset, no check for new mail is
   performed while the mailbox is open.

3.24. collapse_unread

   Type: boolean
   Default: yes

   When  unset, Mutt will not collapse a thread if it contains any unread
   messages.

3.25. uncollapse_jump

   Type: boolean
   Default: no

   When  set, Mutt will jump to the next unread message, if any, when the
   current thread is uncollapsed.

3.26. compose_format

   Type: string
   Default: "-- Mutt: Compose  [Approx. msg size: %l   Atts: %a]%>-"

   Controls the format of the status line displayed in the Compose menu. This
   string  is  similar  to  ``$status_format'',  but  has  its own set of
   printf()-like sequences:

   %a
          total number of attachments

   %h
          local hostname

   %l
          approximate size (in bytes) of the current message

   %v
          Mutt version string

   See the text describing the ``$status_format'' option for more information
   on how to set ``$compose_format''.

3.27. config_charset

   Type: string
   Default: ""

   When defined, Mutt will recode commands in rc files from this encoding.

3.28. confirmappend

   Type: boolean
   Default: yes

   When set, Mutt will prompt for confirmation when appending messages to an
   existing mailbox.

3.29. confirmcreate

   Type: boolean
   Default: yes

   When  set, Mutt will prompt for confirmation when saving messages to a
   mailbox which does not yet exist before creating it.

3.30. connect_timeout

   Type: number
   Default: 30

   Causes Mutt to timeout a network connection (for IMAP or POP) after this
   many seconds if the connection is not able to be established. A negative
   value causes Mutt to wait indefinitely for the connection to succeed.

3.31. content_type

   Type: string
   Default: "text/plain"

   Sets the default Content-Type for the body of newly composed messages.

3.32. copy

   Type: quadoption
   Default: yes

   This variable controls whether or not copies of your outgoing messages will
   be  saved  for later references. Also see ``$record'', ``$save_name'',
   ``$force_name'' and ``fcc-hook''.

3.33. crypt_use_gpgme

   Type: boolean
   Default: no

   This variable controls the use the GPGME enabled crypto backends. If it is
   set and Mutt was build with gpgme support, the gpgme code for S/MIME and PGP
   will be used instead of the classic code. Note, that you need to use this
   option in .muttrc as it won't have any effect when used interactively.

3.34. crypt_autopgp

   Type: boolean
   Default: yes

   This variable controls whether or not mutt may automatically enable PGP
   encryption/signing  for  messages.  See  also  ``$crypt_autoencrypt'',
   ``$crypt_replyencrypt'', ``$crypt_autosign'', ``$crypt_replysign'' and
   ``$smime_is_default''.

3.35. crypt_autosmime

   Type: boolean
   Default: yes

   This variable controls whether or not mutt may automatically enable S/MIME
   encryption/signing  for  messages.  See  also  ``$crypt_autoencrypt'',
   ``$crypt_replyencrypt'', ``$crypt_autosign'', ``$crypt_replysign'' and
   ``$smime_is_default''.

3.36. date_format

   Type: string
   Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"

   This variable controls the format of the date printed by the ``%d'' sequence
   in ``$index_format''. This is passed to the strftime call to process the
   date. See the man page for strftime(3) for the proper syntax.

   Unless the first character in the string is a bang (``!''), the month and
   week  day  names are expanded according to the locale specified in the
   variable ``$locale''. If the first character in the string is a bang, the
   bang is discarded, and the month and week day names in the rest of the
   string are expanded in the C locale (that is in US English).

3.37. default_hook

   Type: string
   Default: "˜f %s !˜P | (˜P ˜C %s)"

   This  variable controls how send-hooks, message-hooks, save-hooks, and
   fcc-hooks will be interpreted if they are specified with only a simple
   regexp, instead of a matching pattern. The hooks are expanded when they are
   declared, so a hook will be interpreted according to the value of this
   variable at the time the hook is declared. The default value matches if the
   message is either from a user matching the regular expression given, or if
   it is from you (if the from address matches ``alternates'') and is to or
   cc'ed to a user matching the given regular expression.

3.38. delete

   Type: quadoption
   Default: ask-yes

   Controls  whether  or  not messages are really deleted when closing or
   synchronizing a mailbox. If set to yes, messages marked for deleting will
   automatically be purged without prompting. If set to no, messages marked for
   deletion will be kept in the mailbox.

3.39. delete_untag

   Type: boolean
   Default: yes

   If  this option is set, mutt will untag messages when marking them for
   deletion. This applies when you either explicitly delete a message, or when
   you save it to another folder.

3.40. digest_collapse

   Type: boolean
   Default: yes

   If this option is set, mutt's received-attachments menu will not show the
   subparts  of  individual  messages in a multipart/digest. To see these
   subparts, press 'v' on that menu.

3.41. display_filter

   Type: path
   Default: ""

   When set, specifies a command used to filter messages. When a message is
   viewed it is passed as standard input to $display_filter, and the filtered
   message is read from the standard output.

3.42. dotlock_program

   Type: path
   Default: "/usr/local/bin/mutt_dotlock"

   Contains the path of the mutt_dotlock (8) binary to be used by mutt.

3.43. dsn_notify

   Type: string
   Default: ""

   Note: you should not enable this unless you are using Sendmail 8.8.x or
   greater.

   This variable sets the request for when notification is returned. The string
   consists  of a comma separated list (no spaces!) of one or more of the
   following:  never,  to never request notification, failure, to request
   notification on transmission failure, delay, to be notified of message
   delays, success, to be notified of successful transmission.

   Example: set dsn_notify="failure,delay"

3.44. dsn_return

   Type: string
   Default: ""

   Note: you should not enable this unless you are using Sendmail 8.8.x or
   greater.

   This variable controls how much of your message is returned in DSN messages.
   It may be set to either hdrs to return just the message header, or full to
   return the full message.

   Example: set dsn_return=hdrs

3.45. duplicate_threads

   Type: boolean
   Default: yes

   This  variable controls whether mutt, when sorting by threads, threads
   messages with the same message-id together. If it is set, it will indicate
   that it thinks they are duplicates of each other with an equals sign in the
   thread diagram.

3.46. edit_headers

   Type: boolean
   Default: no

   This option allows you to edit the header of your outgoing messages along
   with the body of your message.

3.47. editor

   Type: path
   Default: ""

   This variable specifies which editor is used by mutt. It defaults to the
   value of the VISUAL, or EDITOR, environment variable, or to the string "vi"
   if neither of those are set.

3.48. encode_from

   Type: boolean
   Default: no

   When set, mutt will quoted-printable encode messages when they contain the
   string "From " in the beginning of a line. Useful to avoid the tampering
   certain mail delivery and transport agents tend to do with messages.

3.49. envelope_from_address

   Type: e-mail address
   Default: ""

   Manually sets the envelope sender for outgoing messages. This value is
   ignored if ``$use_envelope_from'' is unset.

3.50. escape

   Type: string
   Default: "˜"

   Escape character to use for functions in the builtin editor.

3.51. fast_reply

   Type: boolean
   Default: no

   When set, the initial prompt for recipients and subject are skipped when
   replying to messages, and the initial prompt for subject is skipped when
   forwarding messages.

   Note: this variable has no effect when the ``$autoedit'' variable is set.

3.52. fcc_attach

   Type: boolean
   Default: yes

   This variable controls whether or not attachments on outgoing messages are
   saved along with the main body of your message.

3.53. fcc_clear

   Type: boolean
   Default: no

   When this variable is set, FCCs will be stored unencrypted and unsigned,
   even when the actual message is encrypted and/or signed. (PGP only)

3.54. folder

   Type: path
   Default: "˜/Mail"

   Specifies  the default location of your mailboxes. A `+' or `=' at the
   beginning of a pathname will be expanded to the value of this variable. Note
   that if you change this variable from the default value you need to make
   sure that the assignment occurs before you use `+' or `=' for any other
   variables since expansion takes place during the `set' command.

3.55. folder_format

   Type: string
   Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"

   This variable allows you to customize the file browser display to your
   personal taste. This string is similar to ``$index_format'', but has its own
   set of printf()-like sequences:

   %C
          current file number

   %d
          date/time folder was last modified

   %f
          filename

   %F
          file permissions

   %g
          group name (or numeric gid, if missing)

   %l
          number of hard links

   %N
          N if folder has new mail, blank otherwise

   %s
          size in bytes

   %t
          * if the file is tagged, blank otherwise

   %u
          owner name (or numeric uid, if missing)

   %>X
          right justify the rest of the string and pad with character "X"

   %|X
          pad to the end of the line with character "X"

3.56. followup_to

   Type: boolean
   Default: yes

   Controls whether or not the Mail-Followup-To header field is generated when
   sending mail. When set, Mutt will generate this field when you are replying
   to a known mailing list, specified with the ``subscribe'' or ``lists''
   commands.

   This field has two purposes. First, preventing you from receiving duplicate
   copies of replies to messages which you send to mailing lists, and second,
   ensuring that you do get a reply separately for any messages sent to known
   lists to which you are not subscribed. The header will contain only the
   list's address for subscribed lists, and both the list address and your own
   email address for unsubscribed lists. Without this header, a group reply to
   your message sent to a subscribed list will be sent to both the list and
   your address, resulting in two copies of the same email for you.

3.57. force_name

   Type: boolean
   Default: no

   This variable is similar to ``$save_name'', except that Mutt will store a
   copy of your outgoing message by the username of the address you are sending
   to even if that mailbox does not exist.

   Also see the ``$record'' variable.

3.58. forward_decode

   Type: boolean
   Default: yes

   Controls  the  decoding  of complex MIME messages into text/plain when
   forwarding a message. The message header is also RFC2047 decoded. This
   variable  is  only  used,  if  ``$mime_forward''  is  unset, otherwise
   ``$mime_forward_decode'' is used instead.

3.59. forward_edit

   Type: quadoption
   Default: yes

   This quadoption controls whether or not the user is automatically placed in
   the editor when forwarding messages. For those who always want to forward
   with no modification, use a setting of ``no''.

3.60. forward_format

   Type: string
   Default: "[%a: %s]"

   This variable controls the default subject when forwarding a message. It
   uses the same format sequences as the ``$index_format'' variable.

3.61. forward_quote

   Type: boolean
   Default: no

   When set forwarded messages included in the main body of the message (when
   ``$mime_forward'' is unset) will be quoted using ``$indent_string''.

3.62. from

   Type: e-mail address
   Default: ""

   When  set,  this  variable  contains a default from address. It can be
   overridden using my_hdr (including from send-hooks) and ``$reverse_name''.
   This variable is ignored if ``$use_from'' is unset.

   Defaults to the contents of the environment variable EMAIL.

3.63. gecos_mask

   Type: regular expression
   Default: "^[^,]*"

   A regular expression used by mutt to parse the GECOS field of a password
   entry when expanding the alias. By default the regular expression is set to
   "^[^,]*" which will return the string up to the first "," encountered. If
   the GECOS field contains a string like "lastname, firstname" then you should
   set the gecos_mask=".*".

   This can be useful if you see the following behavior: you address a e-mail
   to user ID stevef whose full name is Steve Franklin. If mutt expands stevef
   to "Franklin" stevef@foo.bar then you should set the gecos_mask to a regular
   expression that will match the whole name so mutt will expand "Franklin" to
   "Franklin, Steve".

3.64. hdrs

   Type: boolean
   Default: yes

   When unset, the header fields normally added by the ``my_hdr'' command are
   not created. This variable must be unset before composing a new message or
   replying in order to take effect. If set, the user defined header fields are
   added to every new message.

3.65. header

   Type: boolean
   Default: no

   When set, this variable causes Mutt to include the header of the message you
   are replying to into the edit buffer. The ``$weed'' setting applies.

3.66. help

   Type: boolean
   Default: yes

   When  set,  help lines describing the bindings for the major functions
   provided by each menu are displayed on the first line of the screen.

   Note: The binding will not be displayed correctly if the function is bound
   to a sequence rather than a single keystroke. Also, the help line may not be
   updated if a binding is changed while Mutt is running. Since this variable
   is primarily aimed at new users, neither of these should present a major
   problem.

3.67. hidden_host

   Type: boolean
   Default: no

   When set, mutt will skip the host name part of ``$hostname'' variable when
   adding the domain part to addresses. This variable does not affect the
   generation  of  Message-IDs,  and  it  will not lead to the cut-off of
   first-level domains.

3.68. hide_limited

   Type: boolean
   Default: no

   When set, mutt will not show the presence of messages that are hidden by
   limiting, in the thread tree.

3.69. hide_missing

   Type: boolean
   Default: yes

   When set, mutt will not show the presence of missing messages in the thread
   tree.

3.70. hide_thread_subject

   Type: boolean
   Default: yes

   When set, mutt will not show the subject of messages in the thread tree that
   have  the same subject as their parent or closest previously displayed
   sibling.

3.71. hide_top_limited

   Type: boolean
   Default: no

   When set, mutt will not show the presence of messages that are hidden by
   limiting,  at  the  top  of threads in the thread tree. Note that when
   $hide_limited is set, this option will have no effect.

3.72. hide_top_missing

   Type: boolean
   Default: yes

   When set, mutt will not show the presence of missing messages at the top of
   threads in the thread tree. Note that when $hide_missing is set, this option
   will have no effect.

3.73. history

   Type: number
   Default: 10

   This variable controls the size (in number of strings remembered) of the
   string history buffer. The buffer is cleared each time the variable is set.

3.74. honor_followup_to

   Type: quadoption
   Default: yes

   This variable controls whether or not a Mail-Followup-To header is honored
   when group-replying to a message.

3.75. hostname

   Type: string
   Default: ""

   Specifies the hostname to use after the ``@'' in local e-mail addresses.
   This overrides the compile time definition obtained from /etc/resolv.conf.

3.76. ignore_list_reply_to

   Type: boolean
   Default: no

   Affects the behaviour of the reply function when replying to messages from
   mailing lists. When set, if the ``Reply-To:'' field is set to the same value
   as the ``To:'' field, Mutt assumes that the ``Reply-To:'' field was set by
   the mailing list to automate responses to the list, and will ignore this
   field. To direct a response to the mailing list when this option is set, use
   the list-reply function; group-reply will reply to both the sender and the
   list.

3.77. imap_authenticators

   Type: string
   Default: ""

   This is a colon-delimited list of authentication methods mutt may attempt to
   use  to  log  in to an IMAP server, in the order mutt should try them.
   Authentication methods are either 'login' or the right side of an IMAP
   'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi' or 'cram-md5'. This
   parameter is case-insensitive. If this parameter is unset (the default) mutt
   will try all available methods, in order from most-secure to least-secure.

   Example: set imap_authenticators="gssapi:cram-md5:login"

   Note:  Mutt will only fall back to other authentication methods if the
   previous  methods  are  unavailable.  If  a  method  is  available but
   authentication fails, mutt will not connect to the IMAP server.

3.78. imap_check_subscribed

   Type: boolean
   Default: no

   When set, mutt will fetch the set of subscribed folders from your server on
   connection, and add them to the set of mailboxes it polls for new mail. See
   also the ``mailboxes'' command.

3.79. imap_delim_chars

   Type: string
   Default: "/."

   This contains the list of characters which you would like to treat as folder
   separators for displaying IMAP paths. In particular it helps in using the
   '=' shortcut for your folder variable.

3.80. imap_headers

   Type: string
   Default: ""

   Mutt requests these header fields in addition to the default headers ("DATE
   FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE CONTENT-DESCRIPTION
   IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP servers before displaying the
   index menu. You may want to add more headers for spam detection. Note: This
   is a space separated list.

3.81. imap_home_namespace

   Type: string
   Default: ""

   You normally want to see your personal folders alongside your INBOX in the
   IMAP browser. If you see something else, you may set this variable to the
   IMAP path to your folders.

3.82. imap_idle

   Type: boolean
   Default: no

   When set, mutt will attempt to use the IMAP IDLE extension to check for new
   mail in the current mailbox. Some servers (dovecot was the inspiration for
   this option) react badly to mutt's implementation. If your connection seems
   to freeze up periodically, try unsetting this.

3.83. imap_keepalive

   Type: number
   Default: 900

   This variable specifies the maximum amount of time in seconds that mutt will
   wait  before polling open IMAP connections, to prevent the server from
   closing them before mutt has finished with them. The default is well within
   the RFC-specified minimum amount of time (30 minutes) before a server is
   allowed to do this, but in practice the RFC does get violated every now and
   then. Reduce this number if you find yourself getting disconnected from your
   IMAP server due to inactivity.

3.84. imap_list_subscribed

   Type: boolean
   Default: no

   This variable configures whether IMAP folder browsing will look for only
   subscribed folders or all folders. This can be toggled in the IMAP browser
   with the toggle-subscribed function.

3.85. imap_login

   Type: string
   Default: ""

   Your login name on the IMAP server.

   This variable defaults to the value of imap_user.

3.86. imap_pass

   Type: string
   Default: ""

   Specifies the password for your IMAP account. If unset, Mutt will prompt you
   for your password when you invoke the fetch-mail function. Warning: you
   should only use this option when you are on a fairly secure machine, because
   the superuser can read your muttrc even if you are the only one who can read
   the file.

3.87. imap_passive

   Type: boolean
   Default: yes

   When set, mutt will not open new IMAP connections to check for new mail.
   Mutt will only check for new mail over existing IMAP connections. This is
   useful if you don't want to be prompted to user/password pairs on mutt
   invocation, or if opening the connection is slow.

3.88. imap_peek

   Type: boolean
   Default: yes

   When set, mutt will avoid implicitly marking your mail as read whenever you
   fetch a message from the server. This is generally a good thing, but can
   make closing an IMAP folder somewhat slower. This option exists to appease
   speed freaks.

3.89. imap_servernoise

   Type: boolean
   Default: yes

   When set, mutt will display warning messages from the IMAP server as error
   messages. Since these messages are often harmless, or generated due to
   configuration problems on the server which are out of the users' hands, you
   may wish to suppress them at some point.

3.90. imap_user

   Type: string
   Default: ""

   The name of the user whose mail you intend to access on the IMAP server.

   This variable defaults to your user name on the local machine.

3.91. implicit_autoview

   Type: boolean
   Default: no

   If set to ``yes'', mutt will look for a mailcap entry with the copiousoutput
   flag  set for every MIME attachment it doesn't have an internal viewer
   defined for. If such an entry is found, mutt will use the viewer defined in
   that entry to convert the body part to text form.

3.92. include

   Type: quadoption
   Default: ask-yes

   Controls whether or not a copy of the message(s) you are replying to is
   included in your reply.

3.93. include_onlyfirst

   Type: boolean
   Default: no

   Controls whether or not Mutt includes only the first attachment of the
   message you are replying.

3.94. indent_string

   Type: string
   Default: "> "

   Specifies the string to prepend to each line of text quoted in a message to
   which you are replying. You are strongly encouraged not to change this
   value, as it tends to agitate the more fanatical netizens.

3.95. index_format

   Type: string
   Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"

   This variable allows you to customize the message index display to your
   personal taste.

   ``Format strings'' are similar to the strings used in the ``C'' function
   printf to format output (see the man page for more detail). The following
   sequences are defined in Mutt:

   %a
          address of the author

   %A
          reply-to address (if present; otherwise: address of author)

   %b
          filename of the original message folder (think mailBox)

   %B
          the list to which the letter was sent, or else the folder name (%b).

   %c
          number of characters (bytes) in the message

   %C
          current message number

   %d
          date  and  time  of  the  message  in  the  format specified by
          ``date_format'' converted to sender's time zone

   %D
          date  and  time  of  the  message  in  the  format specified by
          ``date_format'' converted to the local time zone

   %e
          current message number in thread

   %E
          number of messages in current thread

   %f
          entire From: line (address + real name)

   %F
          author name, or recipient name if the message is from you

   %H
          spam attribute(s) of this message

   %i
          message-id of the current message

   %l
          number of lines in the message (does not work with maildir, mh, and
          possibly IMAP folders)

   %L
          If an address in the To or CC header field matches an address defined
          by the users ``subscribe'' command, this displays "To <list-name>",
          otherwise the same as %F.

   %m
          total number of message in the mailbox

   %M
          number of hidden messages if the thread is collapsed.

   %N
          message score

   %n
          author's real name (or address if missing)

   %O
          (_O_riginal save folder) Where mutt would formerly have stashed the
          message: list name or recipient name if no list

   %s
          subject of the message

   %S
          status of the message (N/D/d/!/r/*)

   %t
          `to:' field (recipients)

   %T
          the appropriate character from the $to_chars string

   %u
          user (login) name of the author

   %v
          first name of the author, or the recipient if the message is from you

   %X
          number of attachments (please see the ``attachments'' section for
          possible speed effects)

   %y
          `x-label:' field, if present

   %Y
          `x-label' field, if present, and (1) not at part of a thread tree,
          (2)  at the top of a thread, or (3) `x-label' is different from
          preceding message's `x-label'.

   %Z
          message status flags

   %{fmt}
          the date and time of the message is converted to sender's time zone,
          and ``fmt'' is expanded by the library function ``strftime''; a
          leading bang disables locales

   %[fmt]
          the date and time of the message is converted to the local time zone,
          and ``fmt'' is expanded by the library function ``strftime''; a
          leading bang disables locales

   %(fmt)
          the local date and time when the message was received. ``fmt'' is
          expanded  by  the library function ``strftime''; a leading bang
          disables locales

   %<fmt>
          the current local time. ``fmt'' is expanded by the library function
          ``strftime''; a leading bang disables locales.

   %>X
          right justify the rest of the string and pad with character "X"

   %|X
          pad to the end of the line with character "X"

   See also: ``$to_chars''.

3.96. ispell

   Type: path
   Default: "/usr/bin/ispell"

   How to invoke ispell (GNU's spell-checking software).

3.97. keep_flagged

   Type: boolean
   Default: no

   If set, read messages marked as flagged will not be moved from your spool
   mailbox  to  your ``$mbox'' mailbox, or as a result of a ``mbox-hook''
   command.

3.98. locale

   Type: string
   Default: "C"

   The locale used by strftime(3) to format dates. Legal values are the strings
   your system accepts for the locale variable LC_TIME.

3.99. mail_check

   Type: number
   Default: 5

   This variable configures how often (in seconds) mutt should look for new
   mail.

3.100. mailcap_path

   Type: string
   Default: ""

   This variable specifies which files to consult when attempting to display
   MIME bodies not directly supported by Mutt.

3.101. mailcap_sanitize

   Type: boolean
   Default: yes

   If set, mutt will restrict possible characters in mailcap % expandos to a
   well-defined set of safe characters. This is the safe setting, but we are
   not sure it doesn't break some more advanced MIME stuff.

   DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!

3.102. header_cache

   Type: path
   Default: ""

   The  header_cache  variable  points  to  the header cache database. If
   header_cache points to a directory it will contain a header cache database
   per folder. If header_cache points to a file that file will be a single
   global header cache. By default it is unset so no header caching will be
   used.

3.103. maildir_header_cache_verify

   Type: boolean
   Default: yes

   Check for Maildir unaware programs other than mutt having modified maildir
   files when the header cache is in use. This incurs one stat(2) per message
   every time the folder is opened.

3.104. header_cache_pagesize

   Type: string
   Default: "16384"

   When mutt is compiled with either gdbm or bdb4 as the header cache backend,
   this option changes the database page size. Too large or too small values
   can waste space, memory, or CPU time. The default should be more or less
   optimal for most use cases.

3.105. header_cache_compress

   Type: boolean
   Default: no

   When  mutt  is compiled with qdbm as header cache backend, this option
   determines whether the database will be compressed. Compression results in
   database files roughly being one fifth of the usual diskspace, but the
   uncompression can result in a slower opening of cached folder(s).

3.106. maildir_trash

   Type: boolean
   Default: no

   If set, messages marked as deleted will be saved with the maildir (T)rashed
   flag  instead  of  unlinked.  NOTE: this only applies to maildir-style
   mailboxes. Setting it will have no effect on other mailbox types.

3.107. mark_old

   Type: boolean
   Default: yes

   Controls whether or not mutt marks new unread messages as old if you exit a
   mailbox without reading them. With this option set, the next time you start
   mutt, the messages will show up with an "O" next to them in the index menu,
   indicating that they are old.

3.108. markers

   Type: boolean
   Default: yes

   Controls the display of wrapped lines in the internal pager. If set, a ``+''
   marker  is  displayed  at the beginning of wrapped lines. Also see the
   ``$smart_wrap'' variable.

3.109. mask

   Type: regular expression
   Default: "!^\.[^.]"

   A regular expression used in the file browser, optionally preceded by the
   not operator ``!''. Only files whose names match this mask will be shown.
   The match is always case-sensitive.

3.110. mbox

   Type: path
   Default: "˜/mbox"

   This specifies the folder into which read mail in your ``$spoolfile'' folder
   will be appended.

3.111. mbox_type

   Type: folder magic
   Default: mbox

   The default mailbox type used when creating new folders. May be any of mbox,
   MMDF, MH and Maildir.

3.112. metoo

   Type: boolean
   Default: no

   If unset, Mutt will remove your address (see the ``alternates'' command)
   from the list of recipients when replying to a message.

3.113. menu_context

   Type: number
   Default: 0

   This variable controls the number of lines of context that are given when
   scrolling through menus. (Similar to ``$pager_context''.)

3.114. menu_move_off

   Type: boolean
   Default: yes

   When unset, the bottom entry of menus will never scroll up past the bottom
   of the screen, unless there are less entries than lines. When set, the
   bottom entry may move off the bottom.

3.115. menu_scroll

   Type: boolean
   Default: no

   When set, menus will be scrolled up or down one line when you attempt to
   move across a screen boundary. If unset, the screen is cleared and the next
   or previous page of the menu is displayed (useful for slow links to avoid
   many redraws).

3.116. meta_key

   Type: boolean
   Default: no

   If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as
   if the user had pressed the ESC key and whatever key remains after having
   the high bit removed. For example, if the key pressed has an ASCII value of
   0xf8, then this is treated as if the user had pressed ESC then ``x''. This
   is because the result of removing the high bit from ``0xf8'' is ``0x78'',
   which is the ASCII character ``x''.

3.117. mh_purge

   Type: boolean
   Default: no

   When unset, mutt will mimic mh's behaviour and rename deleted messages to
   ,<old file name> in mh folders instead of really deleting them. If the
   variable is set, the message files will simply be deleted.

3.118. mh_seq_flagged

   Type: string
   Default: "flagged"

   The name of the MH sequence used for flagged messages.

3.119. mh_seq_replied

   Type: string
   Default: "replied"

   The name of the MH sequence used to tag replied messages.

3.120. mh_seq_unseen

   Type: string
   Default: "unseen"

   The name of the MH sequence used for unseen messages.

3.121. mime_forward

   Type: quadoption
   Default: no

   When set, the message you are forwarding will be attached as a separate MIME
   part instead of included in the main body of the message. This is useful for
   forwarding MIME messages so the receiver can properly view the message as it
   was delivered to you. If you like to switch between MIME and not MIME from
   mail to mail, set this variable to ask-no or ask-yes.

   Also see ``$forward_decode'' and ``$mime_forward_decode''.

3.122. mime_forward_decode

   Type: boolean
   Default: no

   Controls  the  decoding  of complex MIME messages into text/plain when
   forwarding   a  message  while  ``$mime_forward''  is  set.  Otherwise
   ``$forward_decode'' is used instead.

3.123. mime_forward_rest

   Type: quadoption
   Default: yes

   When forwarding multiple attachments of a MIME message from the recvattach
   menu, attachments which cannot be decoded in a reasonable manner will be
   attached to the newly composed message if this option is set.

3.124. mix_entry_format

   Type: string
   Default: "%4n %c %-16s %a"

   This variable describes the format of a remailer line on the mixmaster chain
   selection screen. The following printf-like sequences are supported:

   %n
          The running number on the menu.

   %c
          Remailer capabilities.

   %s
          The remailer's short name.

   %a
          The remailer's e-mail address.

3.125. mixmaster

   Type: path
   Default: "mixmaster"

   This variable contains the path to the Mixmaster binary on your system. It
   is  used  with  various sets of parameters to gather the list of known
   remailers, and to finally send a message through the mixmaster chain.

3.126. move

   Type: quadoption
   Default: ask-no

   Controls whether or not Mutt will move read messages from your spool mailbox
   to your ``$mbox'' mailbox, or as a result of a ``mbox-hook'' command.

3.127. message_cachedir

   Type: path
   Default: ""

   Set this to a directory and mutt will cache copies of messages from your
   IMAP and POP servers here. You are free to remove entries at any time, for
   instance if stale entries accumulate because you have deleted messages with
   another mail client.

3.128. message_format

   Type: string
   Default: "%s"

   This is the string displayed in the ``attachment'' menu for attachments of
   type message/rfc822. For a full listing of defined printf()-like sequences
   see the section on ``$index_format''.

3.129. narrow_tree

   Type: boolean
   Default: no

   This variable, when set, makes the thread tree narrower, allowing deeper
   threads to fit on the screen.

3.130. net_inc

   Type: number
   Default: 10

   Operations that expect to transfer a large amount of data over the network
   will update their progress every net_inc kilobytes. If set to 0, no progress
   messages will be displayed.

   See also ``$read_inc'' and ``$write_inc''.

3.131. pager

   Type: path
   Default: "builtin"

   This variable specifies which pager you would like to use to view messages.
   builtin means to use the builtin pager, otherwise this variable should
   specify the pathname of the external pager you would like to use.

   Using an external pager may have some disadvantages: Additional keystrokes
   are necessary because you can't call mutt functions directly from the pager,
   and screen resizes cause lines longer than the screen width to be badly
   formatted in the help menu.

3.132. pager_context

   Type: number
   Default: 0

   This variable controls the number of lines of context that are given when
   displaying the next or previous page in the internal pager. By default, Mutt
   will display the line after the last one on the screen at the top of the
   next page (0 lines of context).

3.133. pager_format

   Type: string
   Default: "-%Z- %C/%m: %-20.20n   %s"

   This  variable  controls the format of the one-line message ``status''
   displayed before each message in either the internal or an external pager.
   The valid sequences are listed in the ``$index_format'' section.

3.134. pager_index_lines

   Type: number
   Default: 0

   Determines the number of lines of a mini-index which is shown when in the
   pager. The current message, unless near the top or bottom of the folder,
   will be roughly one third of the way down this mini-index, giving the reader
   the context of a few messages before and after the message. This is useful,
   for example, to determine how many messages remain to be read in the current
   thread. One of the lines is reserved for the status bar from the index, so a
   pager_index_lines of 6 will only show 5 lines of the actual index. A value
   of 0 results in no index being shown. If the number of messages in the
   current folder is less than pager_index_lines, then the index will only use
   as many lines as it needs.

3.135. pager_stop

   Type: boolean
   Default: no

   When set, the internal-pager will not move to the next message when you are
   at the end of a message and invoke the next-page function.

3.136. crypt_autosign

   Type: boolean
   Default: no

   Setting this variable will cause Mutt to always attempt to cryptographically
   sign outgoing messages. This can be overridden by use of the pgp-menu, when
   signing  is  not  required  or  encryption  is  requested  as well. If
   ``$smime_is_default'' is set, then OpenSSL is used instead to create S/MIME
   messages and settings can be overridden by use of the smime-menu. (Crypto
   only)

3.137. crypt_autoencrypt

   Type: boolean
   Default: no

   Setting this variable will cause Mutt to always attempt to PGP encrypt
   outgoing  messages.  This is probably only useful in connection to the
   send-hook  command.  It can be overridden by use of the pgp-menu, when
   encryption  is  not  required  or  signing  is  requested  as well. IF
   ``$smime_is_default'' is set, then OpenSSL is used instead to create S/MIME
   messages and settings can be overridden by use of the smime-menu. (Crypto
   only)

3.138. pgp_ignore_subkeys

   Type: boolean
   Default: yes

   Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
   the principal key will inherit the subkeys' capabilities. Unset this if you
   want to play interesting key selection games. (PGP only)

3.139. crypt_replyencrypt

   Type: boolean
   Default: yes

   If set, automatically PGP or OpenSSL encrypt replies to messages which are
   encrypted. (Crypto only)

3.140. crypt_replysign

   Type: boolean
   Default: no

   If set, automatically PGP or OpenSSL sign replies to messages which are
   signed.

   Note: this does not work on messages that are encrypted and signed! (Crypto
   only)

3.141. crypt_replysignencrypted

   Type: boolean
   Default: no

   If set, automatically PGP or OpenSSL sign replies to messages which are
   encrypted. This makes sense in combination with ``$crypt_replyencrypt'',
   because  it  allows  you  to sign all messages which are automatically
   encrypted. This works around the problem noted in ``$crypt_replysign'', that
   mutt is not able to find out whether an encrypted message is also signed.
   (Crypto only)

3.142. crypt_timestamp

   Type: boolean
   Default: yes

   If set, mutt will include a time stamp in the lines surrounding PGP or
   S/MIME output, so spoofing such lines is more difficult. If you are using
   colors to mark these lines, and rely on these, you may unset this setting.
   (Crypto only)

3.143. pgp_use_gpg_agent

   Type: boolean
   Default: no

   If set, mutt will use a possibly-running gpg-agent process. (PGP only)

3.144. crypt_verify_sig

   Type: quadoption
   Default: yes

   If ``yes'', always attempt to verify PGP or S/MIME signatures. If ``ask'',
   ask whether or not to verify the signature. If ``no'', never attempt to
   verify cryptographic signatures. (Crypto only)

3.145. smime_is_default

   Type: boolean
   Default: no

   The default behaviour of mutt is to use PGP on all auto-sign/encryption
   operations.  To  override and to use OpenSSL instead this must be set.
   However, this has no effect while replying, since mutt will automatically
   select the same application that was used to sign/encrypt the original
   message.  (Note  that  this  variable  can  be overridden by unsetting
   $crypt_autosmime.) (S/MIME only)

3.146. smime_ask_cert_label

   Type: boolean
   Default: yes

   This flag controls whether you want to be asked to enter a label for a
   certificate about to be added to the database or not. It is set by default.
   (S/MIME only)

3.147. smime_decrypt_use_default_key

   Type: boolean
   Default: yes

   If set (default) this tells mutt to use the default key for decryption.
   Otherwise, if manage multiple certificate-key-pairs, mutt will try to use
   the mailbox-address to determine the key to use. It will ask you to supply a
   key, if it can't find one. (S/MIME only)

3.148. pgp_entry_format

   Type: string
   Default: "%4n %t%f %4l/0x%k %-4a %2c %u"

   This variable allows you to customize the PGP key selection menu to your
   personal taste. This string is similar to ``$index_format'', but has its own
   set of printf()-like sequences:

   %n
          number

   %k
          key id

   %u
          user id

   %a
          algorithm

   %l
          key length

   %f
          flags

   %c
          capabilities

   %t
          trust/validity of the key-uid association

   %[<s>]
          date of the key where <s> is an strftime(3) expression

   (PGP only)

3.149. pgp_good_sign

   Type: regular expression
   Default: ""

   If  you  assign  a text to this variable, then a PGP signature is only
   considered verified if the output from $pgp_verify_command contains the
   text. Use this variable if the exit code from the command is 0 even for bad
   signatures. (PGP only)

3.150. pgp_check_exit

   Type: boolean
   Default: yes

   If set, mutt will check the exit code of the PGP subprocess when signing or
   encrypting. A non-zero exit code means that the subprocess failed. (PGP
   only)

3.151. pgp_long_ids

   Type: boolean
   Default: no

   If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. (PGP
   only)

3.152. pgp_retainable_sigs

   Type: boolean
   Default: no

   If   set,  signed  and  encrypted  messages  will  consist  of  nested
   multipart/signed and multipart/encrypted body parts.

   This is useful for applications like encrypted and signed mailing lists,
   where the outer layer (multipart/encrypted) can be easily removed, while the
   inner multipart/signed part is retained. (PGP only)

3.153. pgp_autoinline

   Type: boolean
   Default: no

   This option controls whether Mutt generates old-style inline (traditional)
   PGP encrypted or signed messages under certain circumstances. This can be
   overridden by use of the pgp-menu, when inline is not required.

   Note that Mutt might automatically use PGP/MIME for messages which consist
   of  more than a single MIME part. Mutt can be configured to ask before
   sending PGP/MIME messages when inline (traditional) would not work. See
   also: ``$pgp_mime_auto''.

   Also  note  that  using  the  old-style PGP message format is strongly
   deprecated. (PGP only)

3.154. pgp_replyinline

   Type: boolean
   Default: no

   Setting this variable will cause Mutt to always attempt to create an inline
   (traditional)  message  when  replying  to  a  message  which  is  PGP
   encrypted/signed inline. This can be overridden by use of the pgp-menu, when
   inline is not required. This option does not automatically detect if the
   (replied-to) message is inline; instead it relies on Mutt internals for
   previously checked/flagged messages.

   Note that Mutt might automatically use PGP/MIME for messages which consist
   of  more than a single MIME part. Mutt can be configured to ask before
   sending PGP/MIME messages when inline (traditional) would not work. See
   also: ``$pgp_mime_auto''.

   Also  note  that  using  the  old-style PGP message format is strongly
   deprecated. (PGP only)

3.155. pgp_show_unusable

   Type: boolean
   Default: yes

   If set, mutt will display non-usable keys on the PGP key selection menu.
   This includes keys which have been revoked, have expired, or have been
   marked as ``disabled'' by the user. (PGP only)

3.156. pgp_sign_as

   Type: string
   Default: ""

   If you have more than one key pair, this option allows you to specify which
   of your private keys to use. It is recommended that you use the keyid form
   to specify your key (e.g., ``0x00112233''). (PGP only)

3.157. pgp_strict_enc

   Type: boolean
   Default: yes

   If  set,  Mutt  will  automatically encode PGP/MIME signed messages as
   quoted-printable. Please note that unsetting this variable may lead to
   problems with non-verifyable PGP signatures, so only change this if you know
   what you are doing. (PGP only)

3.158. pgp_timeout

   Type: number
   Default: 300

   The number of seconds after which a cached passphrase will expire if not
   used. (PGP only)

3.159. pgp_sort_keys

   Type: sort order
   Default: address

   Specifies how the entries in the `pgp keys' menu are sorted. The following
   are legal values:

   address
          sort alphabetically by user id

   keyid
          sort alphabetically by key id

   date
          sort by key creation date

   trust
          sort by the trust of the key

   If you prefer reverse order of the above values, prefix it with `reverse-'.
   (PGP only)

3.160. pgp_mime_auto

   Type: quadoption
   Default: ask-yes

   This option controls whether Mutt will prompt you for automatically sending
   a (signed/encrypted) message using PGP/MIME when inline (traditional) fails
   (for any reason).

   Also  note  that  using  the  old-style PGP message format is strongly
   deprecated. (PGP only)

3.161. pgp_auto_decode

   Type: boolean
   Default: no

   If set, mutt will automatically attempt to decrypt traditional PGP messages
   whenever the user performs an operation which ordinarily would result in the
   contents of the message being operated on. For example, if the user displays
   a pgp-traditional message which has not been manually checked with the
   check-traditional-pgp function, mutt will automatically check the message
   for traditional pgp.

3.162. pgp_decode_command

   Type: string
   Default: ""

   This  format  strings  specifies  a  command  which  is used to decode
   application/pgp attachments.

   The PGP command formats have their own set of printf-like sequences:

   %p
          Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
          string otherwise. Note: This may be used with a %? construct.

   %f
          Expands to the name of a file containing a message.

   %s
          Expands to the name of a file containing the signature part of a
          multipart/signed attachment when verifying it.

   %a
          The value of $pgp_sign_as.

   %r
          One or more key IDs.

   For examples on how to configure these formats for the various versions of
   PGP which are floating around, see the pgp*.rc and gpg.rc files in the
   samples/ subdirectory which has been installed on your system alongside the
   documentation. (PGP only)

3.163. pgp_getkeys_command

   Type: string
   Default: ""

   This command is invoked whenever mutt will need public key information. %r
   is the only printf-like sequence used with this format. (PGP only)

3.164. pgp_verify_command

   Type: string
   Default: ""

   This command is used to verify PGP signatures. (PGP only)

3.165. pgp_decrypt_command

   Type: string
   Default: ""

   This command is used to decrypt a PGP encrypted message. (PGP only)

3.166. pgp_clearsign_command

   Type: string
   Default: ""

   This format is used to create a old-style "clearsigned" PGP message. Note
   that the use of this format is strongly deprecated. (PGP only)

3.167. pgp_sign_command

   Type: string
   Default: ""

   This  command  is  used  to  create  the  detached PGP signature for a
   multipart/signed PGP/MIME body part. (PGP only)

3.168. pgp_encrypt_sign_command

   Type: string
   Default: ""

   This command is used to both sign and encrypt a body part. (PGP only)

3.169. pgp_encrypt_only_command

   Type: string
   Default: ""

   This command is used to encrypt a body part without signing it. (PGP only)

3.170. pgp_import_command

   Type: string
   Default: ""

   This command is used to import a key from a message into the user's public
   key ring. (PGP only)

3.171. pgp_export_command

   Type: string
   Default: ""

   This command is used to export a public key from the user's key ring. (PGP
   only)

3.172. pgp_verify_key_command

   Type: string
   Default: ""

   This command is used to verify key information from the key selection menu.
   (PGP only)

3.173. pgp_list_secring_command

   Type: string
   Default: ""

   This command is used to list the secret key ring's contents. The output
   format must be analogous to the one used by gpg --list-keys --with-colons.

   This format is also generated by the pgpring utility which comes with mutt.
   (PGP only)

3.174. pgp_list_pubring_command

   Type: string
   Default: ""

   This command is used to list the public key ring's contents. The output
   format must be analogous to the one used by gpg --list-keys --with-colons.

   This format is also generated by the pgpring utility which comes with mutt.
   (PGP only)

3.175. forward_decrypt

   Type: boolean
   Default: yes

   Controls the handling of encrypted messages when forwarding a message. When
   set, the outer layer of encryption is stripped off. This variable is only
   used if ``$mime_forward'' is set and ``$mime_forward_decode'' is unset. (PGP
   only)

3.176. smime_timeout

   Type: number
   Default: 300

   The number of seconds after which a cached passphrase will expire if not
   used. (S/MIME only)

3.177. smime_encrypt_with

   Type: string
   Default: ""

   This sets the algorithm that should be used for encryption. Valid choices
   are  "des",  "des3",  "rc2-40",  "rc2-64",  "rc2-128". If unset "3des"
   (TripleDES) is used. (S/MIME only)

3.178. smime_keys

   Type: path
   Default: ""

   Since there is no pubring/secring as with PGP, mutt has to handle storage ad
   retrieval of keys/certs by itself. This is very basic right now, and stores
   keys  and certificates in two different directories, both named as the
   hash-value retrieved from OpenSSL. There is an index file which contains
   mailbox-address keyid pair, and which can be manually edited. This one
   points to the location of the private keys. (S/MIME only)

3.179. smime_ca_location

   Type: path
   Default: ""

   This variable contains the name of either a directory, or a file which
   contains trusted certificates for use with OpenSSL. (S/MIME only)

3.180. smime_certificates

   Type: path
   Default: ""

   Since there is no pubring/secring as with PGP, mutt has to handle storage
   and retrieval of keys by itself. This is very basic right now, and keys and
   certificates are stored in two different directories, both named as the
   hash-value retrieved from OpenSSL. There is an index file which contains
   mailbox-address keyid pairs, and which can be manually edited. This one
   points to the location of the certificates. (S/MIME only)

3.181. smime_decrypt_command

   Type: string
   Default: ""

   This  format  string  specifies  a  command  which  is used to decrypt
   application/x-pkcs7-mime attachments.

   The OpenSSL command formats have their own set of printf-like sequences
   similar to PGP's:

   %f
          Expands to the name of a file containing a message.

   %s
          Expands to the name of a file containing the signature part of a
          multipart/signed attachment when verifying it.

   %k
          The key-pair specified with $smime_default_key

   %c
          One or more certificate IDs.

   %a
          The algorithm used for encryption.

   %C
          CA location: Depending on whether $smime_ca_location points to a
          directory or file, this expands to "-CApath $smime_ca_location" or
          "-CAfile $smime_ca_location".

   For examples on how to configure these formats, see the smime.rc in the
   samples/ subdirectory which has been installed on your system alongside the
   documentation. (S/MIME only)

3.182. smime_verify_command

   Type: string
   Default: ""

   This command is used to verify S/MIME signatures of type multipart/signed.
   (S/MIME only)

3.183. smime_verify_opaque_command

   Type: string
   Default: ""

   This   command   is   used   to   verify  S/MIME  signatures  of  type
   application/x-pkcs7-mime. (S/MIME only)

3.184. smime_sign_command

   Type: string
   Default: ""

   This command is used to created S/MIME signatures of type multipart/signed,
   which can be read by all mail clients. (S/MIME only)

3.185. smime_sign_opaque_command

   Type: string
   Default: ""

   This   command   is   used   to  created  S/MIME  signatures  of  type
   application/x-pkcs7-signature, which can only be handled by mail clients
   supporting the S/MIME extension. (S/MIME only)

3.186. smime_encrypt_command

   Type: string
   Default: ""

   This command is used to create encrypted S/MIME messages. (S/MIME only)

3.187. smime_pk7out_command

   Type: string
   Default: ""

   This command is used to extract PKCS7 structures of S/MIME signatures, in
   order to extract the public X509 certificate(s). (S/MIME only)

3.188. smime_get_cert_command

   Type: string
   Default: ""

   This command is used to extract X509 certificates from a PKCS7 structure.
   (S/MIME only)

3.189. smime_get_signer_cert_command

   Type: string
   Default: ""

   This command is used to extract only the signers X509 certificate from a
   S/MIME signature, so that the certificate's owner may get compared to the
   email's 'From'-field. (S/MIME only)

3.190. smime_import_cert_command

   Type: string
   Default: ""

   This command is used to import a certificate via smime_keys. (S/MIME only)

3.191. smime_get_cert_email_command

   Type: string
   Default: ""

   This command is used to extract the mail address(es) used for storing X509
   certificates,  and  for  verification  purposes  (to check whether the
   certificate was issued for the sender's mailbox). (S/MIME only)

3.192. smime_default_key

   Type: string
   Default: ""

   This is the default key-pair to use for signing. This must be set to the
   keyid (the hash-value that OpenSSL generates) to work properly (S/MIME only)

3.193. ssl_client_cert

   Type: path
   Default: ""

   The file containing a client certificate and its associated private key.

3.194. ssl_force_tls

   Type: boolean
   Default: no

   If this variable is set, Mutt will require that all connections to remote
   servers be encrypted. Furthermore it will attempt to negotiate TLS even if
   the server does not advertise the capability, since it would otherwise have
   to abort the connection anyway. This option supersedes ``$ssl_starttls''.

3.195. ssl_starttls

   Type: quadoption
   Default: yes

   If  set  (the  default),  mutt will attempt to use STARTTLS on servers
   advertising  the  capability. When unset, mutt will not attempt to use
   STARTTLS regardless of the server's capabilities.

3.196. certificate_file

   Type: path
   Default: "˜/.mutt_certificates"

   This variable specifies the file where the certificates you trust are saved.
   When an unknown certificate is encountered, you are asked if you accept it
   or not. If you accept it, the certificate can also be saved in this file and
   further connections are automatically accepted.

   You  can  also  manually  add CA certificates in this file. Any server
   certificate  that is signed with one of these CA certificates are also
   automatically accepted.

   Example: set certificate_file=˜/.mutt/certificates

3.197. ssl_usesystemcerts

   Type: boolean
   Default: yes

   If set to yes, mutt will use CA certificates in the system-wide certificate
   store when checking if server certificate is signed by a trusted CA.

3.198. entropy_file

   Type: path
   Default: ""

   The file which includes random data that is used to initialize SSL library
   functions.

3.199. ssl_use_sslv2

   Type: boolean
   Default: yes

   This  variables  specifies  whether to attempt to use SSLv2 in the SSL
   authentication process.

3.200. ssl_use_sslv3

   Type: boolean
   Default: yes

   This  variables  specifies  whether to attempt to use SSLv3 in the SSL
   authentication process.

3.201. ssl_use_tlsv1

   Type: boolean
   Default: yes

   This  variables  specifies  whether to attempt to use TLSv1 in the SSL
   authentication process.

3.202. ssl_min_dh_prime_bits

   Type: number
   Default: 0

   This variable specifies the minimum acceptable prime size (in bits) for use
   in any Diffie-Hellman key exchange. A value of 0 will use the default from
   the GNUTLS library.

3.203. ssl_ca_certificates_file

   Type: path
   Default: ""

   This variable specifies a file containing trusted CA certificates. Any
   server certificate that is signed with one of these CA certificates are also
   automatically accepted.

   Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt

3.204. pipe_split

   Type: boolean
   Default: no

   Used in connection with the pipe-message command and the ``tag- prefix''
   operator. If this variable is unset, when piping a list of tagged messages
   Mutt will concatenate the messages and will pipe them as a single folder.
   When set, Mutt will pipe the messages one by one. In both cases the messages
   are piped in the current sorted order, and the ``$pipe_sep'' separator is
   added after each message.

3.205. pipe_decode

   Type: boolean
   Default: no

   Used in connection with the pipe-message command. When unset, Mutt will pipe
   the messages without any preprocessing. When set, Mutt will weed headers and
   will attempt to PGP/MIME decode the messages first.

3.206. pipe_sep

   Type: string
   Default: "\n"

   The separator to add between messages when piping a list of tagged messages
   to an external Unix command.

3.207. pop_authenticators

   Type: string
   Default: ""

   This is a colon-delimited list of authentication methods mutt may attempt to
   use  to  log  in  to an POP server, in the order mutt should try them.
   Authentication methods are either 'user', 'apop' or any SASL mechanism, eg
   'digest-md5', 'gssapi' or 'cram-md5'. This parameter is case-insensitive. If
   this parameter is unset (the default) mutt will try all available methods,
   in order from most-secure to least-secure.

   Example: set pop_authenticators="digest-md5:apop:user"

3.208. pop_auth_try_all

   Type: boolean
   Default: yes

   If set, Mutt will try all available methods. When unset, Mutt will only fall
   back  to  other  authentication  methods  if  the previous methods are
   unavailable. If a method is available but authentication fails, Mutt will
   not connect to the POP server.

3.209. pop_checkinterval

   Type: number
   Default: 60

   This variable configures how often (in seconds) mutt should look for new
   mail in the currently selected mailbox if it is a POP mailbox.

3.210. pop_delete

   Type: quadoption
   Default: ask-no

   If set, Mutt will delete successfully downloaded messages from the POP
   server when using the fetch-mail function. When unset, Mutt will download
   messages but also leave them on the POP server.

3.211. pop_host

   Type: string
   Default: ""

   The  name of your POP server for the fetch-mail function. You can also
   specify an alternative port, username and password, ie:

   [pop[s]://][username[:password]@]popserver[:port]

3.212. pop_last

   Type: boolean
   Default: no

   If this variable is set, mutt will try to use the "LAST" POP command for
   retrieving  only  unread  messages  from the POP server when using the
   fetch-mail function.

3.213. pop_reconnect

   Type: quadoption
   Default: ask-yes

   Controls whether or not Mutt will try to reconnect to POP server if the
   connection is lost.

3.214. pop_user

   Type: string
   Default: ""

   Your login name on the POP server.

   This variable defaults to your user name on the local machine.

3.215. pop_pass

   Type: string
   Default: ""

   Specifies the password for your POP account. If unset, Mutt will prompt you
   for your password when you open POP mailbox. Warning: you should only use
   this option when you are on a fairly secure machine, because the superuser
   can read your muttrc even if you are the only one who can read the file.

3.216. post_indent_string

   Type: string
   Default: ""

   Similar to the ``$attribution'' variable, Mutt will append this string after
   the inclusion of a message which is being replied to.

3.217. postpone

   Type: quadoption
   Default: ask-yes

   Controls whether or not messages are saved in the ``$postponed'' mailbox
   when you elect not to send immediately.

3.218. postponed

   Type: path
   Default: "˜/postponed"

   Mutt allows you to indefinitely ``postpone sending a message'' which you are
   editing. When you choose to postpone a message, Mutt saves it in the mailbox
   specified by this variable. Also see the ``$postpone'' variable.

3.219. preconnect

   Type: string
   Default: ""

   If  set,  a  shell command to be executed if mutt fails to establish a
   connection to the server. This is useful for setting up secure connections,
   e.g. with ssh(1). If the command returns a nonzero status, mutt gives up
   opening the server. Example:

   preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 <
   /dev/null > /dev/null"

   Mailbox 'foo' on mailhost.net can now be reached as '{localhost:1234}foo'.

   NOTE: For this example to work, you must be able to log in to the remote
   machine without having to enter a password.

3.220. print

   Type: quadoption
   Default: ask-no

   Controls whether or not Mutt really prints messages. This is set to ask-no
   by default, because some people accidentally hit ``p'' often (like me).

3.221. print_command

   Type: path
   Default: "lpr"

   This specifies the command pipe that should be used to print messages.

3.222. print_decode

   Type: boolean
   Default: yes

   Used in connection with the print-message command. If this option is set,
   the message is decoded before it is passed to the external command specified
   by $print_command. If this option is unset, no processing will be applied to
   the message when printing it. The latter setting may be useful if you are
   using some advanced printer filter which is able to properly format e-mail
   messages for printing.

3.223. print_split

   Type: boolean
   Default: no

   Used in connection with the print-message command. If this option is set,
   the command specified by $print_command is executed once for each message
   which is to be printed. If this option is unset, the command specified by
   $print_command is executed only once, and all the messages are concatenated,
   with a form feed as the message separator.

   Those who use the enscript(1) program's mail-printing mode will most likely
   want to set this option.

3.224. prompt_after

   Type: boolean
   Default: yes

   If you use an external ``$pager'', setting this variable will cause Mutt to
   prompt you for a command when the pager exits rather than returning to the
   index menu. If unset, Mutt will return to the index menu when the external
   pager exits.

3.225. query_command

   Type: path
   Default: ""

   This specifies the command that mutt will use to make external address
   queries. The string should contain a %s, which will be substituted with the
   query string the user types. See ``query'' for more information.

3.226. quit

   Type: quadoption
   Default: yes

   This variable controls whether ``quit'' and ``exit'' actually quit from
   mutt. If it set to yes, they do quit, if it is set to no, they have no
   effect,  and  if  it is set to ask-yes or ask-no, you are prompted for
   confirmation when you try to quit.

3.227. quote_regexp

   Type: regular expression
   Default: "^([ \t]*[|>:}#])+"

   A regular expression used in the internal-pager to determine quoted sections
   of text in the body of a message.

   Note: In order to use the quotedx patterns in the internal pager, you need
   to  set  this  to  a regular expression that matches exactly the quote
   characters at the beginning of quoted lines.

3.228. read_inc

   Type: number
   Default: 10

   If set to a value greater than 0, Mutt will display which message it is
   currently on when reading a mailbox. The message is printed after read_inc
   messages have been read (e.g., if set to 25, Mutt will print a message when
   it  reads message 25, and then again when it gets to message 50). This
   variable is meant to indicate progress when reading large mailboxes which
   may take some time. When set to 0, only a single message will appear before
   the reading the mailbox.

   Also see the ``$write_inc'' variable.

3.229. read_only

   Type: boolean
   Default: no

   If set, all folders are opened in read-only mode.

3.230. realname

   Type: string
   Default: ""

   This variable specifies what "real" or "personal" name should be used when
   sending messages.

   By  default,  this is the GECOS field from /etc/passwd. Note that this
   variable will not be used when the user has set a real name in the $from
   variable.

3.231. recall

   Type: quadoption
   Default: ask-yes

   Controls whether or not Mutt recalls postponed messages when composing a new
   message. Also see ``$postponed''.

   Setting this variable to ``yes'' is not generally useful, and thus not
   recommended.

3.232. record

   Type: path
   Default: "˜/sent"

   This  specifies  the  file into which your outgoing messages should be
   appended. (This is meant as the primary method for saving a copy of your
   messages, but another way to do this is using the ``my_hdr'' command to
   create a Bcc: field with your email address in it.)

   The value of $record is overridden by the ``$force_name'' and ``$save_name''
   variables, and the ``fcc-hook'' command.

3.233. reply_regexp

   Type: regular expression
   Default: "^(re([\[0-9\]+])*|aw):[ \t]*"

   A regular expression used to recognize reply messages when threading and
   replying. The default value corresponds to the English "Re:" and the German
   "Aw:".

3.234. reply_self

   Type: boolean
   Default: no

   If unset and you are replying to a message sent by you, Mutt will assume
   that you want to reply to the recipients of that message rather than to
   yourself.

3.235. reply_to

   Type: quadoption
   Default: ask-yes

   If set, when replying to a message, Mutt will use the address listed in the
   Reply-to: header as the recipient of the reply. If unset, it will use the
   address in the From: header field instead. This option is useful for reading
   a mailing list that sets the Reply-To: header field to the list address and
   you want to send a private message to the author of a message.

3.236. resolve

   Type: boolean
   Default: yes

   When set, the cursor will be automatically advanced to the next (possibly
   undeleted) message whenever a command that modifies the current message is
   executed.

3.237. reverse_alias

   Type: boolean
   Default: no

   This variable controls whether or not Mutt will display the "personal" name
   from your aliases in the index menu if it finds an alias that matches the
   message's sender. For example, if you have the following alias:

alias juser abd30425@somewhere.net (Joe User)

   and then you receive mail which contains the following header:

From: abd30425@somewhere.net

   It  would  be  displayed  in the index menu as ``Joe User'' instead of
   ``abd30425@somewhere.net.'' This is useful when the person's e-mail address
   is not human friendly (like CompuServe addresses).

3.238. reverse_name

   Type: boolean
   Default: no

   It may sometimes arrive that you receive mail to a certain machine, move the
   messages to another machine, and reply to some the messages from there. If
   this variable is set, the default From: line of the reply messages is built
   using the address where you received the messages you are replying to if
   that address matches your alternates. If the variable is unset, or the
   address that would be used doesn't match your alternates, the From: line
   will use your address on the current machine.

3.239. reverse_realname

   Type: boolean
   Default: yes

   This variable fine-tunes the behaviour of the reverse_name feature. When it
   is set, mutt will use the address from incoming messages as-is, possibly
   including eventual real names. When it is unset, mutt will override any such
   real names with the setting of the realname variable.

3.240. rfc2047_parameters

   Type: boolean
   Default: no

   When  this  variable  is  set,  Mutt will decode RFC-2047-encoded MIME
   parameters. You want to set this variable when mutt suggests you to save
   attachments to files named like this:
   =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=

   When this variable is set interactively, the change doesn't have the desired
   effect before you have changed folders.

   Note that this use of RFC 2047's encoding is explicitly, prohibited by the
   standard, but nevertheless encountered in the wild. Also note that setting
   this parameter will not have the effect that mutt generates this kind of
   encoding. Instead, mutt will unconditionally use the encoding specified in
   RFC 2231.

3.241. save_address

   Type: boolean
   Default: no

   If set, mutt will take the sender's full address when choosing a default
   folder for saving a mail. If ``$save_name'' or ``$force_name'' is set too,
   the selection of the fcc folder will be changed as well.

3.242. save_empty

   Type: boolean
   Default: yes

   When unset, mailboxes which contain no saved messages will be removed when
   closed (the exception is ``$spoolfile'' which is never removed). If set,
   mailboxes are never removed.

   Note: This only applies to mbox and MMDF folders, Mutt does not delete MH
   and Maildir directories.

3.243. save_name

   Type: boolean
   Default: no

   This variable controls how copies of outgoing messages are saved. When set,
   a check is made to see if a mailbox specified by the recipient address
   exists (this is done by searching for a mailbox in the ``$folder'' directory
   with the username part of the recipient address). If the mailbox exists, the
   outgoing message will be saved to that mailbox, otherwise the message is
   saved to the ``$record'' mailbox.

   Also see the ``$force_name'' variable.

3.244. score

   Type: boolean
   Default: yes

   When this variable is unset, scoring is turned off. This can be useful to
   selectively   disable   scoring   for   certain   folders   when   the
   ``$score_threshold_delete'' variable and friends are used.

3.245. score_threshold_delete

   Type: number
   Default: -1

   Messages which have been assigned a score equal to or lower than the value
   of this variable are automatically marked for deletion by mutt. Since mutt
   scores are always greater than or equal to zero, the default setting of this
   variable will never mark a message for deletion.

3.246. score_threshold_flag

   Type: number
   Default: 9999

   Messages which have been assigned a score greater than or equal to this
   variable's value are automatically marked "flagged".

3.247. score_threshold_read

   Type: number
   Default: -1

   Messages which have been assigned a score equal to or lower than the value
   of this variable are automatically marked as read by mutt. Since mutt scores
   are  always greater than or equal to zero, the default setting of this
   variable will never mark a message read.

3.248. send_charset

   Type: string
   Default: "us-ascii:iso-8859-1:utf-8"

   A list of character sets for outgoing messages. Mutt will use the first
   character  set  into  which the text can be converted exactly. If your
   ``$charset'' is not iso-8859-1 and recipients may not understand UTF-8, it
   is advisable to include in the list an appropriate widely used standard
   character set (such as iso-8859-2, koi8-r or iso-2022-jp) either instead of
   or after "iso-8859-1".

3.249. sendmail

   Type: path
   Default: "/usr/sbin/sendmail -oem -oi"

   Specifies the program and arguments used to deliver mail sent by Mutt. Mutt
   expects  that the specified program interprets additional arguments as
   recipient addresses.

3.250. sendmail_wait

   Type: number
   Default: 0

   Specifies the number of seconds to wait for the ``$sendmail'' process to
   finish before giving up and putting delivery in the background.

   Mutt interprets the value of this variable as follows:

   >0
          number of seconds to wait for sendmail to finish before continuing

   0
          wait forever for sendmail to finish

   <0
          always put sendmail in the background without waiting

   Note that if you specify a value other than 0, the output of the child
   process will be put in a temporary file. If there is some error, you will be
   informed as to where to find the output.

3.251. shell

   Type: path
   Default: ""

   Command to use when spawning a subshell. By default, the user's login shell
   from /etc/passwd is used.

3.252. sig_dashes

   Type: boolean
   Default: yes

   If  set,  a  line  containing  ``--  ''  will  be inserted before your
   ``$signature''. It is strongly recommended that you not unset this variable
   unless your ``signature'' contains just your name. The reason for this is
   because many software packages use ``-- \n'' to detect your signature. For
   example, Mutt has the ability to highlight the signature in a different
   color in the builtin pager.

3.253. sig_on_top

   Type: boolean
   Default: no

   If set, the signature will be included before any quoted or forwarded text.
   It is strongly recommended that you do not set this variable unless you
   really know what you are doing, and are prepared to take some heat from
   netiquette guardians.

3.254. signature

   Type: path
   Default: "˜/.signature"

   Specifies the filename of your signature, which is appended to all outgoing
   messages. If the filename ends with a pipe (``|''), it is assumed that
   filename is a shell command and input should be read from its stdout.

3.255. simple_search

   Type: string
   Default: "˜f %s | ˜s %s"

   Specifies how Mutt should expand a simple search into a real search pattern.
   A simple search is one that does not contain any of the ˜ operators. See
   ``patterns'' for more information on search patterns.

   For example, if you simply type joe at a search or limit prompt, Mutt will
   automatically expand it to the value specified by this variable. For the
   default value it would be:

   ˜f joe | ˜s joe

3.256. smart_wrap

   Type: boolean
   Default: yes

   Controls the display of lines longer than the screen width in the internal
   pager. If set, long lines are wrapped at a word boundary. If unset, lines
   are simply wrapped at the screen edge. Also see the ``$markers'' variable.

3.257. smileys

   Type: regular expression
   Default: "(>From )|(:[-^]?[][)(><}{|/DP])"

   The  pager  uses this variable to catch some common false positives of
   ``$quote_regexp'', most notably smileys in the beginning of a line

3.258. sleep_time

   Type: number
   Default: 1

   Specifies time, in seconds, to pause while displaying certain informational
   messages, while moving from folder to folder and after expunging messages
   from the current folder. The default is to pause one second, so a value of
   zero for this option suppresses the pause.

3.259. sort

   Type: sort order
   Default: date

   Specifies how to sort messages in the index menu. Valid values are:

   date or date-sent
   date-received
   from
   mailbox-order (unsorted)
   score
   size
   spam
   subject
   threads
   to

   You may optionally use the reverse- prefix to specify reverse sorting order
   (example: set sort=reverse-date-sent).

3.260. sort_alias

   Type: sort order
   Default: alias

   Specifies how the entries in the `alias' menu are sorted. The following are
   legal values:

   address (sort alphabetically by email address)
   alias (sort alphabetically by alias name)
   unsorted (leave in order specified in .muttrc)

3.261. sort_aux

   Type: sort order
   Default: date

   When sorting by threads, this variable controls how threads are sorted in
   relation to other threads, and how the branches of the thread trees are
   sorted. This can be set to any value that ``$sort'' can, except threads (in
   that case, mutt will just use date-sent). You can also specify the last-
   prefix  in  addition to the reverse- prefix, but last- must come after
   reverse-. The last- prefix causes messages to be sorted against its siblings
   by which has the last descendant, using the rest of sort_aux as an ordering.
   For instance, set sort_aux=last- date-received would mean that if a new
   message is received in a thread, that thread becomes the last one displayed
   (or the first, if you have set sort=reverse-threads.) Note: For reversed
   ``$sort'' order $sort_aux is reversed again (which is not the right thing to
   do, but kept to not break any existing configuration setting).

3.262. sort_browser

   Type: sort order
   Default: alpha

   Specifies how to sort entries in the file browser. By default, the entries
   are sorted alphabetically. Valid values:

   alpha (alphabetically)
   date
   size
   unsorted

   You may optionally use the reverse- prefix to specify reverse sorting order
   (example: set sort_browser=reverse-date).

3.263. sort_re

   Type: boolean
   Default: yes

   This   variable   is   only   useful  when  sorting  by  threads  with
   ``$strict_threads'' unset. In that case, it changes the heuristic mutt uses
   to thread messages by subject. With sort_re set, mutt will only attach a
   message as the child of another message by subject if the subject of the
   child  message  starts  with  a  substring  matching  the  setting  of
   ``$reply_regexp''. With sort_re unset, mutt will attach the message whether
   or not this is the case, as long as the non-``$reply_regexp'' parts of both
   messages are identical.

3.264. spam_separator

   Type: string
   Default: ","

   ``spam_separator'' controls what happens when multiple spam headers are
   matched:  if unset, each successive header will overwrite any previous
   matches value for the spam label. If set, each successive match will append
   to the previous, using ``spam_separator'' as a separator.

3.265. spoolfile

   Type: path
   Default: ""

   If your spool mailbox is in a non-default place where Mutt cannot find it,
   you can specify its location with this variable. Mutt will automatically set
   this variable to the value of the environment variable $MAIL if it is not
   set.

3.266. status_chars

   Type: string
   Default: "-*%A"

   Controls the characters used by the "%r" indicator in ``$status_format''.
   The first character is used when the mailbox is unchanged. The second is
   used when the mailbox has been changed, and it needs to be resynchronized.
   The third is used if the mailbox is in read-only mode, or if the mailbox
   will not be written when exiting that mailbox (You can toggle whether to
   write changes to a mailbox with the toggle-write operation, bound by default
   to "%"). The fourth is used to indicate that the current folder has been
   opened in attach- message mode (Certain operations like composing a new
   mail, replying, forwarding, etc. are not permitted in this mode).

3.267. status_format

   Type: string
   Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%
   ?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)
   ---"

   Controls the format of the status line displayed in the index menu. This
   string is similar to ``$index_format'', but has its own set of printf()-like
   sequences:

   %b
          number of mailboxes with new mail *

   %d
          number of deleted messages *

   %f
          the full pathname of the current mailbox

   %F
          number of flagged messages *

   %h
          local hostname

   %l
          size (in bytes) of the current mailbox *

   %L
          size (in bytes) of the messages shown (i.e., which match the current
          limit) *

   %m
          the number of messages in the mailbox *

   %M
          the number of messages shown (i.e., which match the current limit) *

   %n
          number of new messages in the mailbox *

   %o
          number of old unread messages *

   %p
          number of postponed messages *

   %P
          percentage of the way through the index

   %r
          modified/read-only/won't-write/attach-messageindicator,accordingto
          $status_chars

   %s
          current sorting mode ($sort)

   %S
          current aux sorting method ($sort_aux)

   %t
          number of tagged messages *

   %u
          number of unread messages *

   %v
          Mutt version string

   %V
          currently active limit pattern, if any *

   %>X
          right justify the rest of the string and pad with "X"

   %|X
          pad to the end of the line with "X"

   * = can be optionally printed if nonzero

   Some of the above sequences can be used to optionally print a string if
   their value is nonzero. For example, you may only want to see the number of
   flagged messages if such messages exist, since zero is not particularly
   meaningful.  To  optionally print a string based upon one of the above
   sequences, the following construct is used

   %?<sequence_char>?<optional_string>?

   where sequence_char is a character from the table above, and optional_string
   is  the  string  you  would  like printed if sequence_char is nonzero.
   optional_string may contain other sequences as well as normal text, but you
   may not nest optional strings.

   Here is an example illustrating how to optionally print the number of new
   messages in a mailbox: %?n?%n new messages.?

   Additionally you can switch between two strings, the first one, if a value
   is zero, the second one, if the value is nonzero, by using the following
   construct: %?<sequence_char>?<if_string>&<else_string>?

   You can additionally force the result of any printf-like sequence to be
   lowercase by prefixing the sequence character with an underscore (_) sign.
   For example, if you want to display the local hostname in lowercase, you
   would use: %_h

   If you prefix the sequence character with a colon (:) character, mutt will
   replace any dots in the expansion by underscores. This might be helpful with
   IMAP folders that don't like dots in folder names.

3.268. status_on_top

   Type: boolean
   Default: no

   Setting this variable causes the ``status bar'' to be displayed on the first
   line of the screen rather than near the bottom.

3.269. strict_threads

   Type: boolean
   Default: no

   If  set,  threading  will  only  make  use  of the ``In-Reply-To'' and
   ``References'' fields when you ``$sort'' by message threads. By default,
   messages with the same subject are grouped together in ``pseudo threads.''.
   This may not always be desirable, such as in a personal mailbox where you
   might have several unrelated messages with the subject ``hi'' which will get
   grouped  together.  See  also  ``$sort_re''  for a less drastic way of
   controlling this behaviour.

3.270. suspend

   Type: boolean
   Default: yes

   When unset, mutt won't stop when the user presses the terminal's susp key,
   usually ``control-Z''. This is useful if you run mutt inside an xterm using
   a command like xterm -e mutt.

3.271. text_flowed

   Type: boolean
   Default: no

   When set, mutt will generate text/plain; format=flowed attachments. This
   format is easier to handle for some mailing software, and generally just
   looks like ordinary text. To actually make use of this format's features,
   you'll need support in your editor.

   Note that $indent_string is ignored when this option is set.

3.272. thread_received

   Type: boolean
   Default: no

   When set, mutt uses the date received rather than the date sent to thread
   messages by subject.

3.273. thorough_search

   Type: boolean
   Default: no

   Affects the ˜b and ˜h search operations described in section ``patterns''
   above. If set, the headers and attachments of messages to be searched are
   decoded before searching. If unset, messages are searched as they appear in
   the folder.

3.274. tilde

   Type: boolean
   Default: no

   When set, the internal-pager will pad blank lines to the bottom of the
   screen with a tilde (˜).

3.275. timeout

   Type: number
   Default: 600

   This variable controls the number of seconds Mutt will wait for a key to be
   pressed in the main menu before timing out and checking for new mail. A
   value of zero or less will cause Mutt to never time out.

3.276. tmpdir

   Type: path
   Default: ""

   This variable allows you to specify where Mutt will place its temporary
   files needed for displaying and composing messages. If this variable is not
   set, the environment variable TMPDIR is used. If TMPDIR is not set then
   "/tmp" is used.

3.277. to_chars

   Type: string
   Default: " +TCFL"

   Controls the character used to indicate mail addressed to you. The first
   character is the one used when the mail is NOT addressed to your address
   (default: space). The second is used when you are the only recipient of the
   message (default: +). The third is when your address appears in the TO
   header field, but you are not the only recipient of the message (default:
   T). The fourth character is used when your address is specified in the CC
   header field, but you are not the only recipient. The fifth character is
   used to indicate mail that was sent by you. The sixth character is used to
   indicate when a mail was sent to a mailing-list you subscribe to (default:
   L).

3.278. tunnel

   Type: string
   Default: ""

   Setting this variable will cause mutt to open a pipe to a command instead of
   a  raw  socket. You may be able to use this to set up preauthenticated
   connections to your IMAP/POP3 server. Example:

   tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"

   NOTE: For this example to work you must be able to log in to the remote
   machine without having to enter a password.

3.279. use_8bitmime

   Type: boolean
   Default: no

   Warning: do not set this variable unless you are using a version of sendmail
   which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not
   be able to send mail.

   When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME flag when
   sending 8-bit messages to enable ESMTP negotiation.

3.280. use_domain

   Type: boolean
   Default: yes

   When set, Mutt will qualify all local addresses (ones without the @host
   portion) with the value of ``$hostname''. If unset, no addresses will be
   qualified.

3.281. use_envelope_from

   Type: boolean
   Default: no

   When set, mutt will use ``$envelope_from_address'' as the envelope sender if
   that is set, otherwise it will attempt to derive it from the "From:" header.
   Note that this information is passed to sendmail command using the "-f"
   command line switch, so don't set this option if you are using that switch
   in $sendmail yourself, or if the sendmail on your machine doesn't support
   that command line switch.

3.282. use_from

   Type: boolean
   Default: yes

   When set, Mutt will generate the `From:' header field when sending messages.
   If  unset,  no  `From:' header field will be generated unless the user
   explicitly sets one using the ``my_hdr'' command.

3.283. use_idn

   Type: boolean
   Default: yes

   When set, Mutt will show you international domain names decoded. Note: You
   can use IDNs for addresses even if this is unset. This variable only affects
   decoding.

3.284. use_ipv6

   Type: boolean
   Default: yes

   When set, Mutt will look for IPv6 addresses of hosts it tries to contact. If
   this option is unset, Mutt will restrict itself to IPv4 addresses. Normally,
   the default should work.

3.285. user_agent

   Type: boolean
   Default: yes

   When  set,  mutt  will add a "User-Agent" header to outgoing messages,
   indicating which version of mutt was used for composing them.

3.286. visual

   Type: path
   Default: ""

   Specifies the visual editor to invoke when the ˜v command is given in the
   builtin editor.

3.287. wait_key

   Type: boolean
   Default: yes

   Controls whether Mutt will ask you to press a key after shell- escape,
   pipe-message, pipe-entry, print-message, and print-entry commands.

   It is also used when viewing attachments with ``auto_view'', provided that
   the corresponding mailcap entry has a needsterminal flag, and the external
   program is interactive.

   When set, Mutt will always ask for a key. When unset, Mutt will wait for a
   key only if the external command returned a non-zero status.

3.288. weed

   Type: boolean
   Default: yes

   When set, mutt will weed headers when displaying, forwarding, printing, or
   replying to messages.

3.289. wrap_search

   Type: boolean
   Default: yes

   Controls whether searches wrap around the end of the mailbox.

   When set, searches will wrap around the first (or last) message. When unset,
   searches will not wrap.

3.290. wrapmargin

   Type: number
   Default: 0

   Controls the size of the margin remaining at the right side of the terminal
   when mutt's pager does smart wrapping.

3.291. write_inc

   Type: number
   Default: 10

   When writing a mailbox, a message will be printed every write_inc messages
   to indicate progress. If set to 0, only a single message will be displayed
   before writing a mailbox.

   Also see the ``$read_inc'' variable.

3.292. write_bcc

   Type: boolean
   Default: yes

   Controls whether mutt writes out the Bcc header when preparing messages to
   be sent. Exim users may wish to unset this.

4. Functions

   The following is the list of available functions listed by the mapping in
   which  they  are  available.  The default key setting is given, and an
   explanation of what the function does. The key bindings of these functions
   can be changed with the bind command.

4.1. generic

   The generic menu is not a real menu, but specifies common functions (such as
   movement) available in all menus except for pager and editor. Changing
   settings  for this menu will affect the default bindings for all menus
   (except as noted).

   Table 6.2. Default generic function bindings
      Function     Default key                 Description
   bottom-page     L           move to the bottom of the page
   current-bottom  not bound   move current entry to bottom of page
   current-middle  not bound   move current entry to middle of page
   current-top     not bound   move current entry to top of page
   enter-command   :           enter a muttrc command
   exit            q           exit this menu
   first-entry     =           move to the first entry
   half-down       ]           scroll down 1/2 page
   half-up         [           scroll up 1/2 page
   help            ?           this screen
   jump            number      jump to an index number
   last-entry      *           move to the last entry
   middle-page     M           move to the middle of the page
   next-entry      j           move to the next entry
   next-line       >           scroll down one line
   next-page       z           move to the next page
   previous-entry  k           move to the previous entry
   previous-line   <           scroll up one line
   previous-page   Z           move to the previous page
   refresh         ^L          clear and redraw the screen
   search          /           search for a regular expression
   search-next     n           search for next match
   search-opposite not bound   search for next match in opposite direction
   search-reverse  ESC /       search backwards for a regular expression
   select-entry    RET         select the current entry
   shell-escape    !           run a program in a subshell
   tag-entry       t           toggle the tag on the current entry
   tag-prefix      ;           apply next command to tagged entries
   tag-prefix-cond not bound   apply next function ONLY to tagged messages
   top-page        H           move to the top of the page
   what-key        not bound   display the keycode for a key press

4.2. index

   Table 6.3. Default index menu function bindings
   Function Default key Description
   bounce-message b remail a message to another user
   change-folder c open a different folder
   change-folder-readonly ESC c open a different folder in read only mode
   check-traditional-pgp ESC P check for classic pgp
   clear-flag W clear a status flag from a message
   copy-message C copy a message to a file/mailbox
   create-alias a create an alias from a message sender
   decode-copy ESC C decode a message and copy it to a file/mailbox
   decode-save ESC s decode a message and save it to a file/mailbox
   delete-message d delete the current entry
   delete-pattern D delete messages matching a pattern
   delete-subthread ESC d delete all messages in subthread
   delete-thread ^D delete all messages in thread
   display-address @ display full address of sender
   display-toggle-weed h display message and toggle header weeding
   display-message RET display a message
   edit e edit the current message
   edit-type ^E edit the current message's Content-Type
   exit x exit without saving changes
   extract-keys ^K extract PGP public keys
   fetch-mail G retrieve mail from POP server
   flag-message F toggle a message's 'important' flag
   forget-passphrase ^F wipe PGP passphrase from memory
   forward-message f forward a message with comments
   group-reply g reply to all recipients
   limit l show only messages matching a pattern
   list-reply L reply to specified mailing list
   mail m compose a new mail message
   mail-key ESC k mail a PGP public key
   next-new not bound jump to the next new message
   next-new-then-unread TAB jump to the next new or unread message
   next-subthread ESC n jump to the next subthread
   next-thread ^N jump to the next thread
   next-undeleted j move to the next undeleted message
   next-unread not bound jump to the next unread message
   parent-message P jump to parent message in thread
   pipe-message | pipe message/attachment to a shell command
   previous-new not bound jump to the previous new message
   previous-new-then-unread ESC TAB jump to the previous new or unread message
   previous-page Z move to the previous page
   previous-subthread ESC p jump to previous subthread
   previous-thread ^P jump to previous thread
   previous-undeleted k move to the last undelete message
   previous-unread not bound jump to the previous unread message
   print-message p print the current entry
   query Q query external program for addresses
   quit q save changes to mailbox and quit
   read-subthread ESC r mark the current subthread as read
   read-thread ^R mark the current thread as read
   recall-message R recall a postponed message
   reply r reply to a message
   resend-message ESC e resend message and preserve MIME structure
   save-message s save message/attachment to a file
   set-flag w set a status flag on a message
   show-version V show the Mutt version number and date
   show-limit ESC l show currently active limit pattern, if any
   sort-mailbox o sort messages
   sort-reverse O sort messages in reverse order
   sync-mailbox $ save changes to mailbox
   tag-pattern T tag messages matching a pattern
   tag-thread ESC t tag/untag all messages in the current thread
   toggle-new N toggle a message's 'new' flag
   toggle-write % toggle whether the mailbox will be rewritten
   undelete-message u undelete the current entry
   undelete-pattern U undelete messages matching a pattern
   undelete-subthread ESC u undelete all messages in subthread
   undelete-thread ^U undelete all messages in thread
   untag-pattern ^T untag messages matching a pattern
   view-attachments v show MIME attachments

4.3. pager

   Table 6.4. Default pager menu function bindings
   Function Default key Description
   bottom not bound jump to the bottom of the message
   bounce-message b remail a message to another user
   change-folder c open a different folder
   change-folder-readonly ESC c open a different folder in read only mode
   check-traditional-pgp ESC P check for classic pgp
   copy-message C copy a message to a file/mailbox
   create-alias a create an alias from a message sender
   decode-copy ESC C decode a message and copy it to a file/mailbox
   decode-save ESC s decode a message and save it to a file/mailbox
   delete-message d delete the current entry
   delete-subthread ESC d delete all messages in subthread
   delete-thread ^D delete all messages in thread
   display-address @ display full address of sender
   display-toggle-weed h display message and toggle header weeding
   edit e edit the current message
   edit-type ^E edit the current message's Content-Type
   enter-command : enter a muttrc command
   exit i return to the main-menu
   extract-keys ^K extract PGP public keys
   flag-message F toggle a message's 'important' flag
   forget-passphrase ^F wipe PGP passphrase from memory
   forward-message f forward a message with comments
   group-reply g reply to all recipients
   half-up not bound move up one-half page
   half-down not bound move down one-half page
   help ? this screen
   list-reply L reply to specified mailing list
   mail m compose a new mail message
   mail-key ESC k mail a PGP public key
   mark-as-new N toggle a message's 'new' flag
   next-line RET scroll down one line
   next-entry J move to the next entry
   next-new not bound jump to the next new message
   next-new-then-unread TAB jump to the next new or unread message
   next-page not bound move to the next page
   next-subthread ESC n jump to the next subthread
   next-thread ^N jump to the next thread
   next-undeleted j move to the next undeleted message
   next-unread not bound jump to the next unread message
   parent-message P jump to parent message in thread
   pipe-message | pipe message/attachment to a shell command
   previous-line BackSpace scroll up one line
   previous-entry K move to the previous entry
   previous-new not bound jump to the previous new message
   previous-new-then-unread not bound jump to the previous new message
   previous-page - move to the previous page
   previous-subthread ESC p jump to previous subthread
   previous-thread ^P jump to previous thread
   previous-undeleted k move to the last undelete message
   previous-unread not bound jump to the previous unread message
   print-message p print the current entry
   quit Q save changes to mailbox and quit
   read-subthread ESC r mark the current subthread as read
   read-thread ^R mark the current thread as read
   recall-message R recall a postponed message
   redraw-screen ^L clear and redraw the screen
   reply r reply to a message
   save-message s save message/attachment to a file
   search / search for a regular expression
   search-next n search for next match
   search-opposite not bound search for next match in opposite direction
   search-reverse ESC / search backwards for a regular expression
   search-toggle \ toggle search pattern coloring
   shell-escape ! invoke a command in a subshell
   show-version V show the Mutt version number and date
   skip-quoted S skip beyond quoted text
   sync-mailbox $ save changes to mailbox
   tag-message t tag a message
   toggle-quoted T toggle display of quoted text
   top ^ jump to the top of the message
   undelete-message u undelete the current entry
   undelete-subthread ESC u undelete all messages in subthread
   undelete-thread ^U undelete all messages in thread
   view-attachments v show MIME attachments

4.4. alias

   Table 6.5. Default alias menu function bindings
      Function    Default key                Description
   search         /           search for a regular expression
   search-next    n           search for next match
   search-reverse ESC /       search backwards for a regular expression

4.5. query

   Table 6.6. Default query menu function bindings
      Function     Default key                 Description
   create-alias    a           create an alias from a message sender
   mail            m           compose a new mail message
   query           Q           query external program for addresses
   query-append    A           append new query results to current results
   search          /           search for a regular expression
   search-next     n           search for next match
   search-opposite not bound   search for next match in opposite direction
   search-reverse  ESC /       search backwards for a regular expression

4.6. attach

   Table 6.7. Default attach menu function bindings
   Function Default key Description
   bounce-message b remail a message to another user
   collapse-parts v toggle display of subparts
   delete-entry d delete the current entry
   display-toggle-weed h display message and toggle header weeding
   edit-type ^E edit the current entry's Content-Type
   extract-keys ^K extract PGP public keys
   forward-message f forward a message with comments
   group-reply g reply to all recipients
   list-reply L reply to specified mailing list
   pipe-entry | pipe message/attachment to a shell command
   print-entry p print the current entry
   reply r reply to a message
   resend-message ESC e resend message and preserve MIME structure
   save-entry s save message/attachment to a file
   undelete-entry u undelete the current entry
   view-attach RET view attachment using mailcap entry if necessary
   view-mailcap m force viewing of attachment using mailcap
   view-text T view attachment as text

4.7. compose

   Table 6.8. Default compose menu function bindings
   Function Default key Description
   attach-file a attach a file(s) to this message
   attach-message A attach message(s) to this message
   attach-key ESC k attach a PGP public key
   copy-file C save message/attachment to a file
   detach-file D delete the current entry
   display-toggle-weed h display message and toggle header weeding
   edit-bcc b edit the BCC list
   edit-cc c edit the CC list
   edit-description d edit attachment description
   edit-encoding ^E edit attachment transfer-encoding
   edit-fcc f enter a file to save a copy of this message in
   edit-from ESC f edit the from: field
   edit-file ^X e edit the file to be attached
   edit-headers E edit the message with headers
   edit e edit the message
   edit-mime m edit attachment using mailcap entry
   edit-reply-to r edit the Reply-To field
   edit-subject s edit the subject of this message
   edit-to t edit the TO list
   edit-type ^T edit attachment type
   filter-entry F filter attachment through a shell command
   forget-passphrase ^F wipe PGP passphrase from memory
   ispell i run ispell on the message
   new-mime n compose new attachment using mailcap entry
   pgp-menu p show PGP options
   pipe-entry | pipe message/attachment to a shell command
   postpone-message P save this message to send later
   print-entry l print the current entry
   rename-file R rename/move an attached file
   send-message y send the message
   toggle-unlink u toggle whether to delete file after sending it
   view-attach RET view attachment using mailcap entry if necessary
   write-fcc w write the message to a folder

4.8. postpone

   Table 6.9. Default postpone menu function bindings
      Function    Default key        Description
   delete-entry   d           delete the current entry
   undelete-entry u           undelete the current entry

4.9. browser

   Table 6.10. Default browser menu function bindings
     Function      Default key                   Description
 change-dir        c           change directories
 check-new         TAB         check mailboxes for new mail
 enter-mask        m           enter a file mask
 search            /           search for a regular expression
 search-next       n           search for next match
 search-reverse    ESC /       search backwards for a regular expression
 select-new        N           select a new file in this directory
 sort              o           sort messages
 sort-reverse      O           sort messages in reverse order
 toggle-mailboxes  TAB         toggle whether to browse mailboxes or all files
 view-file         SPACE       view file
 subscribe         s           subscribe to current mailbox (IMAP Only)
 unsubscribe       u           unsubscribe to current mailbox (IMAP Only)
 toggle-subscribed T           toggle view all/subscribed mailboxes (IMAP Only)

4.10. pgp

   Table 6.11. Default pgp menu function bindings
    Function  Default key       Description
   view-name  %           view the key's user id
   verify-key c           verify a PGP public key

4.11. editor

   Table 6.12. Default editor function bindings
      Function     Default key                  Description
   backspace       BackSpace   delete the char in front of the cursor
   backward-char   ^B          move the cursor one character to the left
   backward-word   ESC b       move the cursor to the previous word
   bol             ^A          jump to the beginning of the line
   buffy-cycle     Space       cycle among incoming mailboxes
   capitalize-word ESC c       uppercase the first character in the word
   complete        TAB         complete filename or alias
   complete-query  ^T          complete address with query
   delete-char     ^D          delete the char under the cursor
   downcase-word   ESC l       lowercase all characters in current word
   eol             ^E          jump to the end of the line
   forward-char    ^F          move the cursor one character to the right
   forward-word    ESC f       move the cursor to the next word
   history-down    not bound   scroll down through the history list
   history-up      not bound   scroll up through the history list
   kill-eol        ^K          delete chars from cursor to end of line
   kill-eow        ESC d       delete chars from cursor to end of word
   kill-line       ^U          delete all chars on the line
   kill-word       ^W          delete the word in front of the cursor
   quote-char      ^V          quote the next typed key
   transpose-chars not bound   transpose character under cursor with previous
   upcase-word     ESC u       uppercase all characters in current word

Chapter 7. Miscellany

   Table of Contents

   1. Acknowledgements
   2. About this document

1. Acknowledgements

   Kari Hurtta <kari.hurtta@fmi.fi> co-developed the original MIME parsing code
   back in the ELM-ME days.

   The following people have been very helpful to the development of Mutt:
   Vikas Agnihotri <vikasa@writeme.com>,
   Francois Berjon <Francois.Berjon@aar.alcatel-alsthom.fr>,
   Aric Blumer <aric@fore.com>,
   John Capo <jc@irbs.com>,
   David Champion <dgc@uchicago.edu>,
   Brendan Cully <brendan@kublai.com>,
   Liviu Daia <daia@stoilow.imar.ro>,
   Thomas E. Dickey <dickey@herndon4.his.com>,
   David DeSimone <fox@convex.hp.com>,
   Nickolay N. Dudorov <nnd@wint.itfs.nsk.su>,
   Ruslan Ermilov <ru@freebsd.org>,
   Edmund Grimley Evans <edmundo@rano.org>,
   Michael Finken <finken@conware.de>,
   Sven Guckes <guckes@math.fu-berlin.de>,
   Lars Hecking <lhecking@nmrc.ie>,
   Mark Holloman <holloman@nando.net>,
   Andreas Holzmann <holzmann@fmi.uni-passau.de>,
   Marco d'Itri <md@linux.it>,
   Björn Jacke <bjacke@suse.com>,
   Byrial Jensen <byrial@image.dk>,
   David Jeske <jeske@igcom.net>,
   Christophe Kalt <kalt@hugo.int-evry.fr>,
   Tommi Komulainen <Tommi.Komulainen@iki.fi>,
   Felix von Leitner (a.k.a ``Fefe'') <leitner@math.fu-berlin.de>,
   Brandon Long <blong@fiction.net>,
   Jimmy Mäkelä <jmy@flashback.net>,
   Lars Marowsky-Bree <lmb@pointer.in-minden.de>,
   Thomas ``Mike'' Michlmayr <mike@cosy.sbg.ac.at>,
   Andrew W. Nosenko <awn@bcs.zp.ua>,
   David O'Brien <obrien@Nuxi.cs.ucdavis.edu>,
   Clint Olsen <olsenc@ichips.intel.com>,
   Park Myeong Seok <pms@romance.kaist.ac.kr>,
   Thomas Parmelan <tom@ankh.fr.eu.org>,
   Ollivier Robert <roberto@keltia.freenix.fr>,
   Thomas Roessler <roessler@does-not-exist.org>,
   Roland Rosenfeld <roland@spinnaker.de>,
   TAKIZAWA Takashi <taki@luna.email.ne.jp>,
   Allain Thivillon <Allain.Thivillon@alma.fr>,
   Gero Treuner <gero@70t.de>,
   Vsevolod Volkov <vvv@lucky.net>,
   Ken Weinert <kenw@ihs.com>

2. About this document

   This document was written in DocBook, and then rendered using the Gnome XSLT
   toolkit.
